Latest vibration absorber Tenders | Government vibration absorber Tenders

Central Government / Public Sector

CTN :42434566

19 Nov, 2025 NA

Kazipet - Telangana

Tender For rate contract for manufacture and supply of 60 kg. 1 in 12 over riding curved switches to rdso drg. no. t-4219 alt-11 (with check rail), with latest alterations if any conforming to irs specification: t-10-2025 with latest amendment, if any as on opening of tender with all fittings as per parts listed in the drawing but excluding grsp, insulating liners, erc, fish plates and fish bolts. (any subsequent alterations issued by rdso up to the date of closing of tender is also to be supplied by the firm for which no additional payment would be made) valid for 01 (one) year

CTN :42442659

05 Nov, 2025 NA

Bangalore - Karnataka

Tender For supply of clutch assy,pressure plate set,pressure release bearing set,clutch master cylinder assy,clutch repair master kit,vaccum cylinder hose head assy,clutch pedal bearing set,clutch top rod assy,synchronizer cone,sychronizer ring,shift slivering,shifter assy,reverse gear bearing,extra gear bearing,connection shifter rail,main shaft oil seal,gear box packing kit,gear box fit assy,gear sleeves assy,the above mentioned gear box remove the gear box assy send to the lathwork rectify the fault replaced the all damaged parts and re-assembled the gear box.,the above mentioned clutch and gear box check to re-fit the veh test the veh on rd trail run test done,ignition switch,starting coil relay with base assy,fuel solenoid switch,30a fuse base assy set,5mm wire,main realy,holding realy,fly wheel sensor,the above break down veh mentioned unserviceable part remove and replace with new parts rectified the fault check and trail run on rd test done,break master cylinder repair wk,lock washer set,vaccum cylinder hose pipe head ass

CTN :41609769

13 Nov, 2025 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for il-78 aircraft - subassy, switch (s3) attaching parts, name plate, box assembly, connector circ. mount, relay, filtre element hydac, cap, filter element 5 ? absolute, filter element 10 ? absolute, two way filtered valve restrictor, cylinder, piston, shoulder ring, end cap, oil, screw cap, end cap, air, iso chain, l=61.25 (102 pitches), end cup, nameplate, block assembly, body (part of item 16.1), spool and sleeve assembly, sleeve, spool and sleeve assembly, spool, setscrew (opt to item 90), gear, worm attaching parts, plug, pin, cover attaching parts, sleeve, plate, cover attaching part, needle, valve, assembly, plate, cover attaching parts, it is a sub-assembly of hydraulic flow regulator, label, spool and piston subassembly, spool; compensator(matched set order nha item-290), cap-port s/a, plate - cam, piston, stroking, hud check valve, latch, name plate, name plate, pressure teflon hose, sleeve, bushing teflon, tube assy, tube assy, tube assy, tube assy, drain, pressure teflon hose, cover, body, shaft, splined, harness, harness, harness, harness, harness, body, assembly, o-ring, cam and piston s/a, piston and shoe s/a, bearing barrel, barrel cylinder, mounting flange s/a, pin cam index, front housing s/a, seal and retainer s/a, retainer-seal and bearing, shaft internal drive, bushing spline, spring-helical compression, washer thrust, plate hold down, spacer, bushing, cup (order nha item 6), piston, rate, barrel cylinder, actuator assy, shaft assy, switch assy (s2) attaching parts, switch subassy (s4) attaching parts, body, motor, machined, cam, cam, shaft, plug, cover, motor attaching parts, hex attaching parts, cover, cover attaching parts, cover attaching parts, tube, shaft, splined, plate, switch, stand off attaching parts, spacer, stand off, piston, blocking 9matched set order nha), port cap, seal, plain encased, washer (order nha item 6), terminal (96736 scd 99-1008-3), terminal (96736 scd 99-1008-2), nut, bracket, union, tee (pr12-02), box assy, box assembly, worm, machined, module, module, rail, grounding module, connector attaching parts, washer, flat, nitrogen filter, filter element, filter element, actuator (96736 scd 99-1127) attaching parts, o-ring, fluorosilicone, receptacle, it is a sub-assembly of light control box, connector circ. mount, bearing, cylinder barrel, diode, screw(g702410), rivet (alternate p/n), screw, pnh, self-locking, 8-32 thd x .250 lg, heli-coil insert, insert, screw thread, insert, screw thread, elbow, elbow, union,elbow (ar12-03), clamp, union, lug crimp, switch, micro, screw, relay, 2pdt, type i attaching parts, relay, screw, o-ring, packing performed, screw, washer lock, pin, bolt- machine, 12 pt. hd. (ap), pin, straight, .0937 dia attaching parts, screw, screw, nut, self-locking, screw, cap, socket head, 1900-32 thd x .875 lg, insert, cres helical coil, screw, cap, socket head, .1380-32 thd x .750 lg, clamp, screw, spacer, spacer, grommet, bolt, bolt, bolt, bolt, lee plug, tie up strip, relay, housing assembly, tensioning screw, bracket, chain wheel, axle, washer, name plate, angle, switch assy drogue limit, oil- eye, screw-socket head cap (ap), filter element, washer, wave (96736 scd 99-1011-2), absorber shock

Central Government / Public Sector

CTN :41503391

28 Oct, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of line item 40 impeller, pos. rn, p/n: 19245810001 , line item 30 shaft 80, w. 1.4301 p/n-13387160001 , line item 20 bearing housing, p/n: 19245930001 , line item 10 vibration absorber, p/n: 1924591-0001

CTN :42117588

22 Oct, 2025 NA

Baramulla - Jammu And Kashmir

Tender For bid to ras bid to ras supply of xlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1) (q2) , pvc insulated unsheathed cable with flexible conductor as per is 694 (q2) , towel rail / ring for bathroom (q3) , piano type non modular domestic fan regulator as per is 11037 (q3) , switch fuse unit (q3) , connection pipe with nuts (v2) (q3) , pillar taps (v2) as per is 1795 (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , wood screws (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , piano type non modular domestic electrical sockets - is 1293 (q3) , emery cloth (q3) , wooden fillet exceeding 13 but not exceeding 25 sq cm , tubing gi 20mm dia , glass corner shelf , gi tubing 15mm dia , glass frosted 4ft x3ft of 4mm thick , glass plain 4ftx4ft of 5mm thick , cloth tapestry 48inch width as approved , wooden scanting 40mmx100mmx1950mm chair wood 1st class season wood teakwood , wooden beading of 12mm thick teak 6 mm , syphon kit , isi galvanized steel tube med class 25mm , brushes painting nylon with long bristles 25mm , distemper acrylic washable oil bound white in 10 kgs pack , paint postal red , tank cover for water storage tank 500 ltrs , thinner , snocem paint , tank cover for water storage tank 1000 ltrs , plaster of paris , brushes painting nylon with long bristles 150mm , door eye , brushes painting nylon with long bristles 75mm , brushes painting nylon with long bristles 100mm , hard rubber shoe 25mm square for tables , pvc solvent for plumbing , double action hings 4inch , terracotta geru , brushes painting nylon with long bristles 50mm , pvc swr bend 75mm , bend pvc l l cistern , white cement , nahanl trap 110mm , cowl , lime , emery paper nos 120 , battery terminal , nylon cable tie 200 mm , distilled water 5 ltr , oil filter for 62 point 5 kva dg set , engine lubrication oil , air filter for dg set , fan belt d80 bd80 d14 , coolant oil 1 ltr , gasket 116 mc , flexible pipe 10 mtr 25 mm dia , jamper washer 100 , wooden beading of 4mm thick 25 wide teakwood , pvc seat and back for chair varandah complete fd 256 fd359 , lacker , french polish ready made , pvc beading 18mm wide 4mm thick of teak shade for tables , wood cutting blade 7 inch , lock for almirah steel , ply wood one side teak face bwr 8ftx4ftx3 point 5mm , wooden fillet not exceeding 3 sq cm , fevicol sh , wooden beading of 4 mm x 20mm thick teakwood , peg brass 75mm high shape as directed , sun-mica 1mm thick teak face size 8ft x4ft , wheel for chair revolving , wood primer , turpentine oil , pu arms for chair revolving , magnetic catcher , knob decorative type 40mm dia , table drawer lock , gi check nut 32 mm , sand paper 80mm , sand paper 100mm , wooden cutting blade for reciprocating saw , board hanging clip , silicon carbide sand paper 12inch , cotton thread surya , cgi sheet 810 mmx3657mm , cgi sheet 810 mmx3050mm , cgi sheet 810 mmx2410mm , barbed wire cutter , concertina coil , cutting plier , button holder , angle holder , bed switch , plug 2 pin 5 amp male , plug 2 pin 5 amp female , welding rod

Central Government/Public Sector

CTN :42394038

17 Nov, 2025 NA

Bengaluru - Karnataka

Tender For supply of check rail block 60 kg t- 2592

Central Government/Public Sector

CTN :42343216

24 Oct, 2025 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap all type of rail and rail pieces,such as rail joint, rail post, rail flange, glude joint, cms crossing, p and c rail, check rail, rail pieces, c &s switch rail with or without ferrous attachments like bond patty, tie bar, fish plates, bearing plate, nut & bolts, m.s. plate, g.i. pipe, etc. old used and u.s. (one cut allowed at the time of delivery

Central Government/Public Sector

CTN :42336958

23 Oct, 2025 NA

Multi City - Tamil Nadu

Tender For auction sale of pway scrap - a)cond. u.s weighment rails cl.iii-1)glued joint 60kg - 16 nos, 2)glued joint 52kg - 2 nos, 3)sej stock rail 60 kg- 2 nos, 4)sej tounge rail 60 kg - 1 nos, 5)sej stock rail 52 kg - 1 nos, 6)point stock rail 60 kg - 10 nos, 7)point tounge rail 60 kg - 7 nos, 8)point tounge rail 90 r - 4 nos, 9)bridge guard rail 52 kg - 50.67 mtrs, 10)point check rail 60 kg - 1 nos, 11)point check rail 52 kg - 1 nos, 12)attached rail 60 kg - 1.91 mtrs. qty- 22.429 mts. ds8 no.295911 dt. 14.08.2025. location-km 14/22- 14/26 enr in sse/pway/pon section. b)cond. u.s weighment rails cl.iii-1)guard rail 52 kg - 25.36 mtrs & attached rail 52 kg - 2.63 mtrs, 2)glued joint 60kg - 5nos, 3) glued joint 52kg - 6 nos, 4)sej stock rail 60 kg - 2 nos, 5)sej tounge rail 60 kg - 2 nos, 6)sej tounge rail52 kg - 1 nos, 7)check rail 52 kg - 1 nos, 8)attached rail 60 kg - 0.73 mtrs. qty- 7.675 mts. ds8 no.295909 dt.23.07.2025. location -km 14/18a - 14/22 enr yard in sse/pway/pon section. total quantity - 30.104 mt. note-i]delivery to be made on actual weighment basis. ii]when crane loading is not possible, the purchaser [byengaging his own labourers] is permitted to cut rails to loadable sizes of not less than 150 kgs. iii.]purchaser [by engaging his own labourers] is permitted to cut rails and hand over the excess quantity tothe custodian. nfs- as per tms /ds8 uploaded in tms. any other attachment to be cut and hand over to custodian. anyother nfs material in the lot other than the items earmarked for sale should be handed over to custodian at the time of delivery.

CTN :42336456

24 Oct, 2025 NA

Multi City - West Bengal

Tender For auction sale of others - sc. condemned structure consisting of cond. qtr no.122, type-ii, unit-8. condition-1] crane/jcb is allowed for dismantling purpose at purchasers own cost. 2] during delivery cutting is also allowed with adequate safety measure at purchasers own cost if required. 3] free delivery period for the lot has been approved for 80 [eighty] days by the competent authority. 4] rail fencing surrounding of building is not part of the offer. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.