Latest vibratory compactor sale Tenders | Government vibratory compactor sale Tenders

State Government

CTN :40504043

06 Jun, 2025 50.00 Lacs

Barmer - Rajasthan

Tender For annual rate contract for construction and commissioning of single phase tube wells various rig machine under city dn. barmer

CTN :40508498

17 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete structure and construction material of cp - cement in polythene bags 50 kgs each 43 opc , sand coarse , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , rr stone boulders , tmt steel bar 8 mm dia , tmt steel bar 10 mm di , tmt steel bar 12 mm dia , tmt steel bar 16 mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric , 75mm dia pvc pipe for weep hole , scantling 3 x 3 inch seasoned first class hard wood 2 point 30 mtr long , shuttering plywood of size 8 x 4 feet and 12mm thickness , binding wire 20 gauge zero point 9mm annealed , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 4 inch for shuttering , water proofing compound , quick setting compound , ms door pre fabricated , loophole of size 600 mm x 500 mm , bitumen vg 10 , 10mm thick ms plate as in one layer on roof , 20mm thick ms plate as in two layers on roof , shredded rubber 150 mm , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , paint brush , lighting conductor complete set , cut off machine 14 inch , tile cutter make bosch for ply cutting , working goggle 1 as per sample , ppgi sheet zero point 60 mm thick of size 10 x 03 feet , durmut 5 kg with 5 feet wooden handle , concrete vibration machine petrol needle , hand gloves rubber best quality , pan motor tasala 18 dia made of steel , phawrah with handle midium size , shovel with handle , measuring tape 5 mtr rectractable grade a1 16 , measuring tape 10 mtr rectractable grade a1 16 , wiremess for seiving sand 1 mtr width 15 mtr roll , axes picks 3 kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gum boot various size , spirit level 10 inch long , nylon mason thread 100m long , mild steel single hand double wheel barrow to carry upto wheel barrow 200 kg weight , rock drill machine bit 48mm thick , rock drill machine bit 32mm thick , plumbob steel with lasing , water level pipe for mason work transparents , hammer 10 kg with handle , tmt bar bending frame , tmt bar bending handle , wooden gurmala of size 8 x 4 inch , aluminium study of size 3 x 2 inch and 6 feet long , steel gurmala of size 8 x 4 inch , hdpe tirpal of size 30 x 30 feet , steel bucket 15 ltr , iron cutter blade 14 feet , iron cutter blade 4 feet , hexa blade double side , portable hydraulic concrete mixer machine conforming to is 12119 to 1987 to provide an uniform mix for a reliable operation

CTN :39993528

31 May, 2025 NA

Jodhpur - Rajasthan

Tender For bid to ras custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion ce

corporations/Associations/Others

CTN :40465470

02 Jun, 2025 8.10 Crore

Ahmedabad - Gujarat

Tender For construction of new road & resurface work by baby paver & rollar machine at thakkarnagar, bapunagar, indiacolony, sarspur-rakhiyal ward & different ward under piu in north zone, ahmedabad. (arc) (re-invite tender)

corporations/Associations/Others

CTN :40465471

02 Jun, 2025 8.10 Crore

Ahmedabad - Gujarat

Tender For construction of new road & resurface work by baby paver & rollar machine at sardarnagar, naroda, saijpur, kubernagar & different ward under piu in north zone, ahmedabad. (arc) (re-invite tender)

CTN :40469410

14 Jun, 2025 NA

Kolkata - West Bengal

Tender For supply of power db panels for grse taratala unit - supply of lt power db panel - behind store , supply of lt power db panel - behind fire office , supply of lt power db panel - beside security room , supply of lt power db panel - behind power house , supply of 200a busbar junction box with mccb - beside security room , supply of 200a busbar junction box with mccb - behind power house , supply of lt power db panel - vms room , supply of lt power db panel - machine shop , supply of lt power db panel - ss-1 , supply of lt power db panel -1 - ss-2 , supply of lt power db panel -2 - ss-2 , supply of 200a hrc fuses , supply of 100a 4p mccb with box , supply of 100 sq. mm., 3.5 core copper flexible cable , supply of 50 sq. mm., 3.5 core copper flexible cable , supply and laying of 95 sq. mm., 3.5 core al. armoured cable , supply of earth pit materials , dismantling of existing 10 nos. old db panels and installation and commissioning of 09 nos. new db panels, jb - 2 nos., and construction of earth pits

State Government

CTN :40517994

10 Jun, 2025 3.49 Lacs

Bardhaman - West Bengal

Tender For construction of well and installation of 1 hp solar submersible pump with tank and filter machine uv at siduli bin para sansad no xi under khandra gp activity code 110776931

State Government

CTN :40517998

10 Jun, 2025 3.49 Lacs

Bardhaman - West Bengal

Tender For construction of well and installation of 1 hp solar submersible pump with tank and filter machine uv at sansad no v under khandra gp activity code 110243325

State Government

CTN :40518000

10 Jun, 2025 3.49 Lacs

Bardhaman - West Bengal

Tender For construction of well and installation of 1 hp solar submersible pump with tank and filter machine uv at siduli gpl centre sansad no vi under khandra gp activity code 110776328

CTN :40487572

12 Jun, 2025 35.00 Lacs

Rupnagar - Punjab

Tender For rough cost estimate for replacement of damaged sewer/storm line and repair of damaged road gullies and machine holes and construction of new road gullies in ind. area phase-7 mc s.a.s nagar.

Vibratory Compactor Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

State Government