Latest vip cabin Tenders | Government vip cabin Tenders

corporations/Associations/Others

CTN :39620418

15 Mar, 2025 NA

Patna - Bihar

Tender For auction sale of bih_mo_cables_cat5/lan cable with connector_348.019_203628,bih_mo_cables_cpri cable_215_203628,bih_mo_cables_feeder aluminium cable with foam 7/8_1247_203628,bih_mo_cables_if cable_1835_203628,bih_mo_cables_jumper cable with connector_127_203603,bih_mo_cables_patch cable_233.37_203628,bih_mo_cables_power cable unarmoured (copper)_6987.10168_203628,bih_mo_empty cabinet_empty cabinet - iron , etc,bih_mo_gsm antenna_gsm antenna with clamp_121_203619,bih_mo_iron_iron_97_203619,bih_mo_mw antenna_mw antenna , etc,bih_mo_transmission card_flexi card_471_203619

corporations/Associations/Others

CTN :39620366

11 Mar, 2025 NA

Indore - Madhya Pradesh

Tender For auction sale of govindpura_copper scrap battery strip,govindpura_armoured aluminium cable multiple size cut pices,govindpura_multiple size copper power cable cut pieces,govindpura_p.waste scrap,jabalpur_ms_battery bank cabinet,govindpura_bb cabinet-iron

Central Government And Public Sector

CTN :39112820

20 Mar, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

State Government

CTN :39576953

26 Mar, 2025 NA

Muzaffarpur - Bihar

Tender For supply, installation, testing and commissioning of fixed furniture for main hospital building of hbch rc muzaffarpur bihar 842004 - over head cabinetsover head storage - size : 450mm(d) & 600mm (h)/site requirement(h) storage cabinet: providing and fixing overhead storage cabinet formed of 18 mm marine plywood of approved make finished with 1.5 mm laminates of approved shed and pattern with adjustable shelves of 18mm thick marine plywood as per drawings. shutters:shutter of overhead cabinet to be formed of 18mm ply finished with 1.5 mm laminate of approved colour and pattern, with auto closing spring loaded hinges (hydraulic type) and aluminium profile handles all complete . all external exposed edges to be finished with 2mm thick pvc edge band of approved shade.(front area to be measured) note-rate shall be inclusive of all necessary approved fittings like auto closing spring loaded hinges, locks, aluminium profile handles,tower bolts, and all necessary hardware items. (front area to be measured), full height storage unitproviding and fixing storage units of full/ low height as per drawing. they shall consist of 18mm thk. marine ply top, sides, bottom, shelves and shutters & 8mm thk marine ply for back. the bottom of the storages shall be at 75mm from ffl. the shutter with box type higes of approved make & teak lipping finished with melamine and with approved laminate on all the shutter edges.division of the shutters shall be made equally according to the length of the storages ( as approved by engineer in-charge/ architect). all the external surfaces including back shall be finished with 1.0mm thk. laminate of approved make. 18mm thk. marine ply shelves at 16 interval (approximately / divided equally) or as specified in drawing shall be provided. all inner surfaces shall be finished with laminate including the shutters. the cabinet has group locks, hinges,stopper, and magnate, handles of approved make & quality and provided s.s. satin finished handle of approved shape,size & make all complete. note- rate shall be inclusive of all necessary approved fittings like hinges,magnets, locks, 150mm long ss satin finish handles, and any necessary hardware items. (front area to be measured), double skin partition providing and fixing full height double skin type partition main frame: -aluminium sections of 16 gauge of size 50x50 mm aluminium section verticals at minimum 600mm centre to centre spacing and 50 x 25 mm size aluminium sections horizontal at 600mm centre-centre spacing. extra frame below slab soffit for conduit to run above.(make - jindal, indal, hindalco) skin: 12mm thk marine ply backing on both side screwed with frame as per the drawing. finish: finished with 2mm thick laminate of approved make. laminate shall be fixed on plywood skins with glue having grooves as shown in the drawing or as directed by engineer in charge *the rate shall be also inclusive of pattas & bands, grooves at any level, any design in veneer, textures etc including the necessary framing/ openings for electrical, telephone & ac outlets. front area to me measured & opening for the door should be deducted for payment. ** note -rate for high partition to include the cost of framework above false ceiling as required to fix the same to the ceiling slab for which no extra payment shall be made and the rate quoted shall be inclusive of the same., 12mm thick toughened glass fixed partitions with filming:providing and fixing in position 12mm clear float toughened glass partition with patch fittings for the full height glass partitions as per the direction of the engineer-in-charge. the work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., then toughen the same.the cost to include all hardware (patch fittings etc) required of hettich/haffele/dorma or approved equivalent make viz., single corner patch, top and bottom corner

CTN :39255376

04 Mar, 2025 NA

East Khasi Hills - Meghalaya

Tender For bid to ras supply of pipe 15mm is 1239 , gi pipe 20 mm is 1239 , lakh dana for polish , mirror looking 600 mm l 450mm w with frame pvc , mdf board 8 feet 4 feet 17 mm thickness , ms wire mesh 1mtr wide 15 mtr long , m seal 100 grm , mdf board 8 feet 4 feet 18mm , nails 100mm , nails 25mm , nails 65mm , nails 75mm , plywood commercial type is303 bwr grade 7 ft 3 ft 12mm thick , plywood commercial type bwr grade 8 ft 4ft 18 or 19mm thick , pvc connection pipe 15 mm dia 600 mm long with two nos brass coupling , pvc water storage tank 500ltr 3 layer isi mark , pvc water storage tank 1000ltr 3 layer is mark , plywood one side natural teak face 4mm thick , painting brush 25 mm , painting brush 50 mm , painting brush 75mm , primer red oxide 1 ltr in pack , pvc angle stop cock 15mm dia , pvc connection pipe 15mm dia 450mm long , pvc pipe 50mm dia , pvc rain gutter pipe 180 mm , pvc tank cover lid suitable for 500 or 1000 ltrs tank , pvc waste pipe 32mm , prelaminated particle board l 6 ft w 3 ft thickness18 or 19mm , pvc bip cock 15mm short body , pvc bathroom cabinet of size l 400 mm h 500 mm , pvc float valve with aluminium rod ball 20 mm , pvc low level flushing cistern 5 ltr capacity , red colour powder , raw sienna powder yellow , s s kitchen sink with single bowl l 24 inches w 18 inches , stainless steel kitchen plate rack size l 24 inches w 24 inches d 10 inches , stainless steel kitchen plate rack size l 30inches w 30 inches d 10 inches , stainless steel kitchen plate rack size l 30 inches w 36 inches d 10 inches , stainless steel kitchen plate rack size l 30 inches w 24 d 10 inches , sprit 1 ltr in pack , taflon tape 12mm 10 mtr long , thinner for paint , touch wood , veneered decorative plywood 6mm thick with decorative face veneers on both faces l 8 ft w 4ft , varnish , window glass plain 4mm thick l 3 ft w 4 ft , white cement 1 kg in pack , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :39517000

21 Mar, 2025 NA

Ernakulam - Kerala

Tender For supply of tkt panelling in ceiling 30x20 , procurement of installation of 24 inch led ceiling lights with electrical , procurement and installation roller blinds 5x5 sqft , naval aviation themed texture painting , wall painting putty with 2 costs of putting with emulsion , fabrication and installation of wall mounted tv unit , fabrication and installation of wall mounted show case , aluminium partition with doors 12 x 8 x 3 , flooring vinyl lamination sheet 30x20 , wooden round table and 6 nos chairs , refurbishment of seats upholstery work and polishing , fabrication and installation of uniform hanging cabinet 6x2 with partition for various uniforms , fabrication and installation of door tally 1 and half feet x 2 feet , labour charge

State Government

CTN :39500813

05 Mar, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

CTN :39500621

20 Mar, 2025 2.40 Lacs

Jalandhar - Punjab

Tender For supply of pvc kitchen cabinet , spindle for bib cock 15mm , 3feet x 4feet x 5 mm front toughen glass , spindle for stop cock 15mm , consealed stop cock front cover only , looking mirror 48inchxinch15inchx5mm for table dressing ladies , tumbler holder cp , putty ready made , bow handle symet 150mm , door handle ms ovel type 100mm , bow handle aluminium symet 75mm , gi column pipe 150mm dia 10 feet long heavy grade , gi tubing 80mm medium grade , gi column pipe 100mm dia 10 feet long heavy grade , ppr pipe size 25 mm , brass spindle for 80mm sluice valve , brass spindle for 100mm sluice valve , ppr elbow size 20mm , spun yarn , ppr pipe size 32 mm , ppr tee size 40mm , ppr tee size 25mm , ppr socket size 25mm

CTN :39498417

20 Mar, 2025 NA

Lalitpur - Uttar Pradesh

Tender For supply of display board outdoor video , manual data entry , humidity and temperature , lan cable , stabilizer 3kva , aluminium cabinet , smps 60a with fan

CTN :39455810

17 Mar, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For upgradation of ship support complex washing and drinking point area at hqnavc - upgradation of walls by customized decorative artistic acrylic coatings , rerouting and concealing of drinking water and washing area water pipe lines pipe lines , material and labour for cantilever platform for filling of water using sold base and top , material and labour for ms fabrication work for extension of customized top roof with steel pipe and angle frames , supply and fixing of corrugated galvalume sheet for ridge and eaves gutter , supply and fixing of plain galvalume sheet for roof ridge and eaves gutter , provision of rain water drain , aluminium partitioning of door and sliding window using powder coated sections , material and labour for vox panelling for ceiling , provision of decorative modular light fittings with renewal of internal cables etc , supply and fixing of stainless steel sink , material and labour for customized cabinet door wash basin area , customised shelf cabinet

Vip Cabin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

State Government

State Government