Latest visitor chair scrap Tenders | Government visitor chair scrap Tenders

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

CTN :40977445

26 Jul, 2025 NA

Multi City - Multi State

Tender For supply of almirah large steel , book case sectional steel , almirah mess utensils , stool steel with backrest , charpoy folding ip with hard top , bed hard , table 1000 mm x 750 mm x 750mm , bin linen multi purpose , book case open large glazed , receptacle pvc 20 liters , filing cabinate , durrie 853cm x 609cm , carpet 270 cm x 180 cm , chair computer , chair dining , chair dining officers , chair easy , chair executive , chair cba steel , charpoy ip with hard top , hot food trolley , hat stand with mirror large , locker steel bedside , mirror with shelf , ladder aluminum , mattress , theft proof rifle rack , side rack , screen movable , side board large , sofa set five seater , hand wash stand , table centre , table dining 4 persons , table dining 6 persons , dressing table ladies , table writing , almirah medium steel , bath mat , chair varandah nylon canning , chair writing officers , peg table , rack shoe steel , table 3 feet x 2 feet without drawer , table 3 feet x 2 feet with drawer , table clerk , table dining 8 persons , teapoy varandah , teapoy ) /bid number : gem/2025/b/6233851 * /dated: 07-07-2025 & & / bid document 1 / 33

corporations/Associations/Others

CTN :40848245

14 Jul, 2025 NA

Panvel - Maharashtra

Tender For corrigendum : regarding approving the rates of open gym materials for the year 2025-2026, 2026-2027 and 2027-2028 for 3 years as per requirement of panvel municipal corporation - forearm twirlproduct area : 1.5m x 0.8m (5ft x 2.6ft) safe play area : 2.5m x 1.8m (8.2ft x 5.9ft) ideal for : 13 years & above function: strengthens shoulders & forearms improves wrist agility.technical specification: post dia: 80nb gi main vertical support pipe of shoulder builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frameto hold the rest assemblies wheel structure: 25nb galvanized pipe bend to form ring of wheel and spokes are made up of 15nb g.i. pipes that connect to each other to form a wheel of shoulder twirl. nylon knobs are provided on the wheels for gripping purpose. this wheel is fixed to main support with the help of 40nb connector pipe with specially designed bearing housing. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with, abs board product area : 1.6m x 0.8m (5.2ft x 2.6ft) safe play area : 2.6m x 1.8m (5ft x 5.9ft) ideal for : 13 years & abovefunction: strengthens shoulders & forearms improves wrist agility.technical specification: main structure: the abs board shall be having ergonometric design with main support of 50nb pipe. galvanized round pipe having 50nb with pipe rectangular 50 x 25 x 3 mm to be welded to the main support frame. backrest: backrest sheet having 3mm thick to be made from frp materails pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. frp products: it is made up of fiber reinforced plastic(frp) process. it is made up of 3-4 mm thick fiber reinforced plastic. the frp material is tested for abrasion resistance & uts(ultimate tensile test) powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with the help of cross hatch cutter instruments. nut and bolts: galvanized/ s.s./allen bolt/button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps.all open ends of pipe been closed by gi / pvc caps for user safety against entrapment., aerial stoller product area : 1m x 0.5m (5ft x 2.6ft) safe play area : 2m x 1.5m (6.6ft x 5ft) ideal for : 13 years & abovefunction: strengthens leg muscles. lower body workouttechnical specification: post dia: the aerial stroller having ergonomic design with 80nb gi main vertical support pipe of aerial stroller is fixed over 10mm thick base plate.\ clamping plates are attached to main frame to hold the rest of assemblies. footrest and handles: footrest bend and handle having 40nb and 25nb dia galvanized pipe respectively.the materials used for foorest are aluminum/nylon/lldpe/hdpe specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for

CTN :40916736

08 Jul, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of flexi board e e - flexi board size 15 feet into 10 feet , easel board with stand , information board with stand , note books , reynolds pen , pencil , sharpener , eraser , a4 paper , file cover , packed drinking water , rent for pa systems , rent for shamiana to cover 1600 sqft area , rent for plastic chairs with backrest at the rate rs 15 per head , expenditure on refreshment for all participants at the rate rs 50 per head , packed meals at the rate rs 100 per head

Central Government/Public Sector

CTN :40932752

04 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply and fixing of stainless steel 3 seater chair at vellore cantonment railway station. type - 3 seats, 3 back rests are perforated, with 4 arms, material of main frame - ss 304 , material of seat and backrest - ss 304 , material of arms/armrest- ss 304 dye cast, material of legs- ss 304 dye cas t, material of side bar- bracket solid steel v-shaped powder coated fixed with revert bolts. the overall length - 1760 mm (+/-10 mm), overall depth - 700 m m (+/-5 mm), overall height - 760mm (+/-5 mm). fixing - anchor fastening hole presented on bottom of each legs, hole size - (4mm). thickness of main fram e - 1.8mm, thickness of arm- 1.6mm, thickness of seat and backrest - 1.4mm. warranty - 5 years from date of delivery [ warranty period: 60 months after the date of delivery ]

corporations/Associations/Others

CTN :40197447

10 Jul, 2025 1.64 Lacs

Parichha - Uttar Pradesh

Tender For corrigendum : supply of furniture for rooms of plant main gate and offices of various divisions of ptpp, parichha. - executive revolving chair mesh mid back ergonomic office chair/study chair/revolving chair/computer chair for work from home metal base seat height adjustable, executive table with glass top of top size 6x3 feet., wooden side rack of front size 2x3 feet, office almirah of front size 3x6 feet, plastic durable chair for home & office rose brown plastic cafeteria chair plastic cafeteria chair, wooden rack of front size 3x5 feet, three seater waiting area chair/bench , solid chair for offices(mild steel, iron, silver), executive table with glass top of top size 4 x 3 feet, computer table of size 4x2 feet, large table mica top for placing communication equipments top size 8"x4" feet, executive chair type: - fixed type non-revolving with arm restseat height: - 450 mm (fixed)effective seat depth: 420 to 430 mmseat width: 450 mmslop of seat in backward: 0- 6 degreecentre height of back rest: 250-260mmvertical height of back rest: 420-450 mmback rest range: 95-105 degree, office chair specification-synchro mechanism the 360 swivel along with knee tilt synchro mechanism with three different tilt positions, supports healthy body movements and gives great back support. unique back. the back of the cross chair is a combination of both mesh cushion offering the perfect balance between form, functionality and comfort. adjustable armrest. the chair comes with height adjustable arms for perfect support, to adjust as per individual body size. adjusting the height of arms as desired will make it sier for users to keep their shoulders in a neutral posture. by adjusting arm height users can move closer to their work surface and still make effective use of the backrest. synchro mechanism. the 360 swivel along with knee tilt synchro mechanism with different tilt positions, supports healthy body movements and gives great back support. unique back. the back of the cross chair is a combination of both mesh and cushion offering the perfect balance between form, functionality and comfort. adjustable arm the chair comes with height adjustable arms for perfect support, to adjust as per individual body size. adjusting the height of arms as desired, will make it easier for users to keep their shoulders in a neutral posture. by adjusting arm height user can move closer to their work surface and still make effective use of the backrest

Central Government/Public Sector

CTN :40872343

23 Jul, 2025 NA

Multi City - Multi State

Tender For loading and unloading of cushion seats and backrest from nac coaches (cz, slr, gs and cn) to trimming shop and back to coach.

CTN :40824953

07 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of furniture - executive office table with 2mm hardwood top oakwood walnut etc thickness 18mm with artificial leather desk pad and antislam mechanisam size l 180 cm x w 60 cm x h 76cm , executive office full back chair with linen upholstery and seat foam density greater than 60mm with seat depth adjustment by sliding mechanism and back support , cpu trolley metal ms cpu stand with four caster wheel with swivel function height and width adjustable , magnetic white marker board xuzl 4ft x 3ft x 10mm thick with aluminium beading and front surface material porcelain on steel surface dobule sided lockable with castors , adhesive metallic name plate brass float name plate size 34 cm x 14 cm x 1 5mm , metallic 3 layer file tray material ss 304 size 34 cm x 27 5 cm , writing table top elevator with leather top back support size 21 inch x 15 inch with 10 mm thickness , magnetic duster duster head material metal , marble decorative artificial flower pot , glass paper weight of 250 grams , pen stand metal ss , hand knotted wool and bamboo silk carpet size 12 ft x 8 ft 6mm thickness , storage and file cabinet ms size d 750mm x w 450mmx h 1500mm , 15 person locker metallic size h 84 inch x w 60 inch x d 18 inch , three seater sofa set seat with density 70mm and backrest density 90 mm , metal shoe rack ss 304 powder coated covered form all sides , teakwood magzine display size h 5ft x w 2ftx d 2ft , magnetic stickers for magnetic white board 10 pc pack , foot rest wooden with foam cushion

State Government

CTN :40824957

15 Jul, 2025 NA

Delhi - Delhi

Tender For tender for supply of air conditioner , ac pipe installation , ceiling fan , led light , wiring , wiring , wiring , mcb , mcb , db box , socket , switch , modular base and cover plate , pvc conduit , visitor chair , sofa 2 seater , hod table , hod office chairs , office table , office chairs , almirah/ storage cabinet , storage cabinet/ almirah big , dining hall table-s , dining hall table-b , dining hall chair , cushioned chair with backrest and writing desk , classroom table , audio lectern/wooden podium with pa system , wooden door , false ceiling , roller blinds

Central Government/Public Sector

CTN :40837339

17 Jul, 2025 NA

Ahmedabad - Gujarat

Tender For supply of portable hydraulic jack capacity 10 ton for heavy industrial use conforming following specification 1) jack type: single, 2) body mat erial: alloy steel 3) stroke: 150mm +/-10 mm backrest 4) extended height: 370 mm+/-10 mm 5) retracted height: 250mm +/-10mm 6) cylinder diameter: 6 8mm +/-10 mm 7) accessories: adequate quantity of hose pipes (7m min) & with seal kits, male & female couplers, base plates to provide stability during ja cking. [ warranty period: 30 months after the date of delivery ]

Visitor Chair Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector