Get complete information related to latest Visitors Chairs Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Visitors Chairs Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Visitors Chairs Tenders.
Tender For tender for supply of cusion with cover 21inchx22inchx4inch , cover for cushion 550x525x100mm , seat cushioned foam 21inchx22inchx4inch 40 density , cushion seat with rexine cover for chair dining cushion , leg of charpoy gi pipe 32mm and 408mm length duly threaded at one end , cushion back with rexine cover for chair easy cushion as per fd-358 , cushion seat with rexine cover for chair wrting cushion as per fd-1107 , cushion back with rexine cover for chair wrting cushion as per fd-1107 , cusion with cover for stool dressing lades (map) as per fd/map-ii/07. , pvc seat and back for chair varandah fd/map-ii/06 , back for chair steel made of shesham and duly canned by 2mm half round plastic cane 4mm (ref drg fd-75(m) , plywood 8inchx4inchx12mm one side teakface , plywood teakface 8inchx4inchx6mm , long rail gi 32mm for gi chorpoy size 2 mtrs long both side duly threaded , tape newar nylon 50mm wide. , plywood 8inchx4inchx9mm thick bwr commercial , short rail gi 32mm for gi chorpoy size 900 mm long both side duly threaded , plywood bwr commercial 8inchx4inchx12mm , plywood 8inchx4inchx4mm one side teak face , plywood 6feetx4feetx19mm , plywood 7feetx3feetx12mm , plb 2400 x 1200 mm x19mm , lakh dana , handle cp for almirah steel 100mm , gi tubing 32mm , pvc seat for chair dining make amko as per fd/map-ii/05 , handle ss for locker steel , plywood commercial 8feetx3feetx19mm , light siller (nc sanding) , plywood 8feetx4feetx4mm , pre laminated particle board 2.75x1.83x18mm thick , shocker (hydraulic spindle) for chair revolving , pvc shoe for chair with screw as per sample. , gi elbow 32 mm 3 way , paint white enamel , handle for table bed side , lock 50mm for almirah med steel , touch wood , plywood 6feetx4feetx9mm , spirit dentured best quality , lock for almirah steel medium 75mm , pvc base for chair revolving with wheel , bwr plywood 1800x1200mmx12mm , paint synthetic enamel olive green , fevicol sh , lock for steel almirah large 77mm , telescopic channel 14inch long , turpentine oil , thinner , telescopic channel 8inch long , fevicol sr , pvc bush for chair visitor , french polish , hessian cloth 48inch wide clossly woven , cloth malmal , mr plywood 2400 x 1200 x 6mm , teakwood beading 6mm thick 18mm wide , paint synthetic enamel black , palmet patti , asian paints liquid varnishes or shellac varnish , screw wood 35mm (gypsum) (100nos/pkt) , screw wood steel 50mm (gypsum) , bwr plywood 1800x900mmx12mm , screw wood 45mm (100nos/pkt) (gypsum) , paint se smoke grey , paint brush 75mm , paint brush 50mm , looking mirror for table dressing gents760x380x5mm , knob fancy in teak shade , emery paper no-120 , screw wood steel 40mm (gypsum) , wooden scantling 75x25x2000mm long , nails wire 75mm , hasp & staple cp 2inch , nails wire 32mm (headless) , screw 75mm , pvc arms for chair visitor , emery paper no-100 , paint brush 25mm , teakwood beading 4mm thick 18mm wide , bow handle aluminium 100mm , nails wire 20mm , nails wire 50mm 14 no , screw wood steel 65mm (gypsum) , screw wood steel 25mm(100nos) (gypsum) , nails wire 1/2inch head less 18 no , nails wire 50mm , nails wire 40mm 14 no , nails wire 100mm 14 no , screw wood steel 30mm (philips head)
Tender For bid to ras tender for supply of shovel round nose with handle 2.3 kgs excluding handle weight , spade with handle 1.8 kgs excluding handle weight , crowbar tempered 1650 mm long with across , wheel barrow steel double wheel , wheel barrow steel single wheel , measuring tape metalic 5 mtr long , measuring tape metalic 15 mtr long , axes felling 2kg with handle , hack saw frame fixed with blade size 12 inch , duoble faced sledge hammer fully hardened and tempered 1 kg weight , duoble faced sledge hammer fully hardened and tempered 2 kg weight , duoble faced sledge hammer fully hardened and tempered 3 kg weight , duoble faced sledge hammer fully hardened and tempered 3.5 kg weight , duoble faced sledge hammer fully hardened and tempered 5 kg weight , spirit level 12 inch steel body , spirit level 24 inch steel body , electric line tester , soldering wire , gloves for insulation electrician , flat chisel 0.5 inch , flat chisel 2 inch , round chisel 0.5 inch , round chisel 1.5 inch , half round chisel 0.5 inch , half round chisel 1.5 inch , mortise chisel 0.5 inch , mortise chisel 0.75 inch , carpenter try square 8 inch , carpenter try square 15 inch , file triangular 6 inch , plum bob 8 ozs , mason trowel 4 inch steel with handle , pan mortar standard , hack saw blade size 12 inch , multimeter digital standard , mason square 24 inch x 12 inch , racker 12 prong ms 12 inch long with wooden handle , soldering iron , earth rammer with handle , bitumen pouring cane 10 ltr cap , cube mould , tile cutting machine , ring spanner set of 12 pcs (6x7 to 30x32) , de spanner set of 12 pcs (6x7 to 30x32) , hammers ball pin , cutting pliers , adjustable spanner , empty tool box , nose plier , flat plier , screw driver , mini hacksaw , mini hammer 200 gm , soldering paste , hacksaw 18 inch , claw hammer 200 gms , mason hammer , flat file , half round file , round file , wood drill machine , wood drill bit set , heavy duty drill machine for concrete , heavy duty drill machine bit set , jack planner 12 inch , jack planner 18 inch , jack planner 24 inch , smooth wood planner 6 inch , t bar clamp 6 inch , electric wood planer , hand drill machine with bit , carpenter stone , wood cutter machine with blade , electric grinder , exhaust fan 12 inch , cgi sheet 10 feet x 3 feet , aerial route recee equipment , almirah steel large 78 inch x 36 inch x 19 inch , almirah steel small 50 inch x 30 inch x 18 inch , mattress 6 feet 6 inch x 3 feet 6 inch , revolving office chair , office table , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , hume pipe 1200 mm dia x 2.5 mtr long of np3 standard , water geyser 15 ltrs cap , cgi sheet 10 feet x 4 feet (pre painted) , j hook with nut and bitumen washer , pbs roll (tar felt) having 3 feet width and 20 mtrs length in each roll , linoleum sheet , curtain 7 feet long , door mat , steel rod for curtains , ceiling light white , ceiling light yellow , heavy duty plastic wheeled dust bin 60 ltrs cap , steel hot case , lpg stove double burner , kerosene bhatti with electric motor , kerosene stove burner (4 no) , iron tawa big size for ors mess , degchi/patila 24 inch with lid , degchi/patila 22 inch with lid , degchi/patila 20 inch with lid , degchi/patila 18 inch with lid , degchi/patila 16 inch with lid , degchi/patila 12 inch with lid , rubber pipe/flexible pipe 1inch dia for water supply , rubber pipe/flexible pipe 1.5 inch dia for water supply , parat aluminium 24 inch , steel plate , steel glass , katori bowl , tea spoon , service spoon small for cooking , service spoon medium for cooking , service spoon large for cooking , iron palta , kadai iron 30 inch , kadai iron 24 inch , kadai iron 18 inch , kadai iron 15 inch , pressure cooker 20 ltr , pressure cooker 10 ltr , pressure cooker 5 ltr , pressure cooker 3 ltr , steel bucket , steel jug , gas stove with regulator , pipe and lighter , gas bhatti , idli maker , mixer grinder heavy duty , dinner set (bone china) , dosa tawa , frystrainer small , frystrainer l
Tender For supply of l shape wall table 1200 plus 1050l x 800w x 750h in , jigging table 1900l x 800w x 1000h in , wall table 2000l x 800w x 1000h in , ground mounted cupboard glass shelves 900l x 450w x 1800h , ground mounted cupboard gi shelves 900l x 450w x 1800h , fume hood 1500l x 750w x 2400h in , wall table 1900l x 700w x 750h in , wall storage cupboard 650l x 300w x 600h , wall storage cupboard 733l x 300w x 600h , wall storage cupboard 700l x 300w x 600h , working table moc wood 1550l x 920w x 760h in , wall storage cupboard 816l x 300w x 600h , wall storage cupboard 900l x 300w x 600h , storage rack 1900l x 450w x 1800h in , working table 1200l x 600w x 750h in , operators chair 66 x 63.5 x 106.7h cm , conference chair 75 x 46 x 106hcm , executive chair 75 x 46 x 140hcm
Tender For supply of wooden chair made of teak wood with cushion seat and back with pol ishing complet [ warranty period: 30 months after the date of delivery ]
Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f
Tender For tender for supply of cushion for sofa ( duly stiched with tapestory cloth as per sample provided ) 40 d , pvc seat & back for chair verandah fd/map-ii/06 , pvc sheet for chair school with hand board map drg no fd/e6/map/05 , pvc sheet for chair dinning drg no fd-1105 , hand rest for chair school with hand board map. drg no fd/e6/map/05 , cushioned sheet and back for chair writing as per sample , pvc base for chair revolving with wheel , pvc arms for chair visitor , plywood bwr commercial 8feetx4feetx19mm , plywood bwr commercial 7feetx3feetx12mm , pre laminated particle board 2.75x1.83x18mm thick , plywood teakface 8feetx4feetx6mm , plywood bwr commercial 8feetx4feetx6mm , plywood 8feetx4feetx12mm o/s tf , plywood teakface 8feetx4feetx4mm , lock for steel almirah large , plywood bwr commercial 8feetx4feetx4mm , lock for almirah steel medium , looking mirror for table dressing ladies drg no. fd 251 , paint synthetic enamel olive green , fevicol sh , fevicol sr , telescopic channel 14inch long , tape newar nylon , shocker (hydraulic spindle) for chair revolving , paint synthetic enamel black , hasp & staple aluminium , pvc shoe with screw , telescopic channel 8inch long , hessian cloth 48inch wide clossly woven , paint white enamel , wooden scantling 75x25x2000mm long , thinner , wooden scantling 75x20x2000mm long , paint brush 75mm , paint brush 50mm , paint brush 25mm , butt hinges 50mm , pvc beading 20mm wide 6feet long , pvc bush for chair visitor , emery paper no.120 , emery paper no. 100 , emery paper no. 150 , screw wood steel 25mm (100nos) , nails 1.5inch , nails 1.75inch
Tender For supply of curtain rod bracket decorative type 25mm,wooden planks 100mm wide x 25mm thick x 2 point 45m,ss wire cloth 0 point 36mm dia wire 1 point 2m wide x 15m long,cushion for couch long piece,wooden board 10x12x1 bye 2,cushion for sofa set fd 281,teflon tape,cushion for couch small 20 inches x21 inches x4 inches,ss wire cloth 0 point 36mm dia wire 0 point 9m wide x 15m long,cushion for easy chair 20 inches x20 inches x2 inches,wooden glass beading,screw wood 8x25 mm gl,gl check nut of size 20mm,flat iron holid fast 100x 6 mm,gl check nut of size 15mm,sunmica,screw wood 6x20 mm gl,ms hook 20mm dia,fevicol,ms hook 15mm dia,screw wood 8x40 mm gl,screw wood 8x30 mm gl,tafloan tape 10 mtrs length 1 bye 4 inches width,screw wood 8x75 mm gi,gl hooks 75mm dia,gi long scew 20mm x 150 mm,gl long scew 15mm x 150 mm,cement in poly bag 50 kg,cushion for couch small piece,cotton waste,bitumen strip 50mm wide x 5 mtr long,wooden scantling 4 inches x3 inches x1 point 8mm,gi clamp for 15 mm gl pipe,gi clamp for 20 mm gl pipe,32mm di
Tender For provn of furniture for 08 offrs 56 jcos/ors md accn at mil stn dharangdhra - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07)dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mmh.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs. make-amko or equivalent, bin linen multipurpose with ironing board(fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg., chair dining fd/map-ii/04 (fd/map-ii/04)dimension: overall size shall be 450mm wide x450mm deep and 950 mm height ,450mm high up to seat. description:- (a) all wood to be usd shall be 1st clas hard teak wood (b) the seat of chair shalll be made of 40 density foamcushion having thickness 75mm. the cushion shall be placed and pasted on 12mm bwr plywood as per size of seat duly covered with approved tapestry cloth of rate not less than450mm per mtr. the seat shall be be fixed over the rails and screwed from wood stopper with 30mm long screws.(c) pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws. rest all specification and dimensions are as per drg. finish:- the chair shall be be polished in high gloss melamine polishin walnut shade after preparation of surfaces., hat stand with mirror large (fd-233)dimension:overall size shall be 1330 mm long, 710mm high.description:the inner frame shall be of 50mmx20mm teak wood battens six in nos .the back and front of frame shall be covered with 6mm thick commercial ply.the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive.six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5mm thick looking mirror of (saint gobian,modiguard/atul) shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand.finish: all teak wood surfaces shall be given high gloss french polish with lacquer finish. all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drgs, peg table (fd-384)dimension; overall size shall be 450mm long,300mm wide and 380mm high.description: legs shall be of teak wood of section 30mmx50mm.the legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.two bottom rails of size 20mmx40mm shall be fixed between the legs .a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.top of the table shall be of 18mm thick pre-laminated mdf board with 4mm teak wood edging all round the top of table.finish: all wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.rest all as per drg., receptacle pvc small (fd/e6/map/13)dimension/capacity:-the receptacle shall be of capacity 20 ltrsdescription:the body of receptacle pvc shall be made up of thick polymer plastic of thickness not less than 2.5mm,provided with swivel lid a
Tender For special repair work for conversion of lecture room into conferance room - dismantling doors as per scope of work , providing and fixing isi marked flush door shutters as per scope of work , extra for providing and fixing flush doors with decorative veneering as per scope of work , providing wood work in frames of windows as per scope of work , providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters as per scope of work , providing and fixing five mm pvc paneling on wall as per scope of work , polishing in high gloss or matt finish melamine as per scope of work , providing and fixing fifteen mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles as per scope of work , led light as per scope of work , dismantling aluminium gypsum partitions door window as per scope of work , providing and fixing one mm thick laminate on any existing laminate surfaces as per scope of work , repairing old teak wood chair as per scope of work , garbage disposal as per financial bid