Latest vocational education service Tenders | Government vocational education service Tenders

State Government

CTN :44977791

07 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For construction work of non-residential building of commandant, district training centre udham singh nagar office on the first floor of district commandant, home guards, office udham singh nagar.

CTN :45002278

15 May, 2026 NA

Sagar - Madhya Pradesh

Tender For supply of total supply price for all group a1 items as per sl. no. 01.00 of mr, including gst. , total site work price for all group a1 items as per sl. no. 02.00 of mr, including gst. , total transportation charges for all group a1 items as per sl. no. 03.00 of mr, including gst. , total mandatory spares price for all group a1 items as per sl. no. 04.00 of mr, including gst. , per diem rate for supervision charges as per sl. no. 08.00 of mr, including gst. , lumpsum training charges at vendor works as per sl. no. 10.00 of mr, including gst. , per diem rate for training charges at site as per sl. no. 11.00 of mr, including gst. , total pwamc charges for all group a1 items for 5 years as per sl. no. 12.00 mr, including gst.

CTN :44985727

06 May, 2026 3.69 Lacs

West Tripura - Tripura

Tender For hiring of 1(one) no. maruti eeco including fuel and driver for the office work of cwtit (construction workers training institute of tripura) at khumulwng, jirania, west tripura.

CTN :44985378

09 May, 2026 NA

Jaunpur - Uttar Pradesh

Tender For miscellaneous work for ncc cadets training at vbspu jaunpur

CTN :44964160

12 May, 2026 18.38 Lacs

Bhadradri Kothagudem - Telangana

Tender For roof bolts, m.s. bolts & nuts , rivets, washers & screws , , dog nails , , fish plates, nuts & bolts for fish plates , , belt jointing pins , , cable hooks and signal hooks , , belt conveyor rollers , , belt sections , , resin capsules , , cement capsules , , gi canisters , , blasting gallery - spacers , , radiator repairs , , repairs and rewinding of motors of ac & dc , , repairs / rewinding of transformers (welding/lighting/power) , , gl wire , , wire mesh for longwall salvage , , manufacturing of supply of electrical coils for , , i) ac motors up to 6.6kv grade , , li) transformer coils up to 33 kv grade , , repairs of rotors for electric motor , , lighting cable , , steel chock manufacturing , , house wiring , , all types of fan repairs , , shovel bucket welding , , repairs of pumps , , couplings manufacturing , , special steel and alloy castings , , (tooth points, track pads, mn steel casting) , , manufacturing of fly ash bricks (not to be manufactured at stores site. it shall be at their own site) , , manufacturing of pump components (spares) , , transformer oil filtration , , reconditioning of drill bits an drill rods. , , vulcanizing the old training cable sof drill machines, sdls, lhds etc (work should be carried out at the respective mine premises. , , manufacturing of earth clamps, g.i.flats, g.i.bolts and nuts. , , crimping of hydraulic hoses. , , repairs to hydraulic pumps, motors, control valves and other related components. , , refurbishing of lt & ht switches with oem spares including testing. , , manufacturing/repairs of slip rings & d-contacts. , , furniture repairs i.e. cane chairs, tables, almirahs etc. , , repairs to wet grinders, water purifiers and water coolers , , manufacturing of coupling bolts of all sizes , , fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc. , , manufacturing of haulage rope drum rollers. , , all sizes of ventilation doors. , , safety boards designing/stickering/painting with retro-reflective radium papers/paint on hemm/ radium stickering in underground & surface, radium boards, safety boards & radium jackets. , , fabrication of lighting & cable cross over towers , , maintenance & repairs of air conditioners on hemm , , painting work in underground and on surface , , fabrication and erection of ms structural works like gantry, bunker etc. , , tailoring works at hospitals & area workshops , , manufacturing of hume pipes , , clay pills manufacturing , , maintenance of pmts/lighting transformers/power transformers & sub-stations , , erection /renovation of residential/pmts/sb-station earth pits (conventional type /chemical type). , , testing of all protective relays & mprs , , tub assembling/repairing of coal tubs in mines. , , cl casting works like ci pulley, tub wheels , , outsourcing works in mines, like masonary walls construction, surface material loading, cleaning and dusting in underground etc. , , all types of computer software installation, antivirus, hardware and network installation. , , cc cameras installation and repairs.

CTN :44752593

07 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of distributed control system : : - supply mr s.no. 1 , site work mr s.no. 2 , freight for supply and mandatory spares mr s.no. 3 , mandatory spares mr s.no. 4 , training at vendor works mr s.no. 10 , training at site mr s.no. 11 , pwcamc mr s.no. 12 , precommissioing checks mr s.no. 20 , sil training mr s.no. 21 , extended warranty mr s.no. 22

Central Government/Public Sector

CTN :44434794

30 Apr, 2026 NA

Golaghat - Assam

Tender For corrigendum : design, engineering, manufacturing, procurement of materials and bought out components, assembly at shop, inspection including inspection by tpia, testing at manufacturer works, packing, supply of electrical heat tracing - design, engineering, procurement, fabrication, inspection, testing, transportation, and supply electrical heat tracing system to be installed at numaligarh refinery limited(nrl), assam including erection & commissioning spares, mandatory spares , special tools and tackles, supervision, site work & training charges at site as per the enclosed tender standard specifications, job specification, data sheets etc. and other codes and standards attached or referred as per material requisition for numailgarh refinery limited, golaghat, assam, india.

Central Government And Public Sector

CTN :44760622

01 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

State Government

CTN :44990620

27 Apr, 2026 3.40 Lacs

Bhilwara - Rajasthan

Tender For जनगणना-2027 के कार्य हेतु नियुक्त पर्यवेक्षक एवं प्रगणक का प्रशिक्षण कार्यक्रम - training program of supervisors and enumerators appointed for the work of census-2027

Central Government/Public Sector

CTN :44961121

01 May, 2026 NA

Mumbai - Maharashtra

Tender For supply testing commissioning and installation of gym equipmenta - axiom dual lat pulldown/low row with luxury trim and double stitched upholstery ph-oplrthe axiom series lat pulldown/low row accommodates two exercises that target the entire back and rear shoulder muscle groups. the clean, inviting look is appealing to all exercisers. frame fully welded 11-gauge steel frames electrostatic powder coat finish for maximum durability tower consistent low profile 53 (135 cm) tower full front (or optional rear only) weight stack shrouds adjustments visible, color contrasting, yellow adjustment handles. latex free rubber over molded adjustment handles. weight plates solid steel 15 lb (7.5 kg) weight plates push / pull increment weight: 7.5 lbs (3.75 kg) top weight plate is fitted with self-lubricated bushings magnetic weight selector pin locks into place biomechanics work-arm movements that correctly align with user joint movements, provide a natural, comfortable feel throughout the entire range of motion. variable cams & machine design replicate the body s natural strength profileinstructional placards qr coded / nfc chipped placards pictorially illustrate the muscles trained, proper machine set up & use, for easy to follow instructions regardless of language.size (l x w x h): 91 x 50 x 85 metric (cm): 231 x 127 x 216 recommended live area (l x w x h): 115 x 86 x 97 metric (cm): 292 x 218 x 246weight: 452 lbs (205 kg) *weight stack (includes increment weight): 202.5 lbs (101.25 kg) max user weight: 300 lbs (136 kg)key features: accommodates two exercises that target the entire back and rear shoulder muscle groups comes standard with lat pulldown bar and neutral grip row handle foot pegs provide additional user stability during row angled thigh pads stabilize users without the need of an additional adjustmentframe colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, hammer strength select standing calf hs-scthe hammer strength select standing calf is a fundamental part of the strength training progression. nine pad height positions accommodate all users, and contoured non-slip foot plates allow users ankles to move in a full range-of-motion. the 22 pieces in the hammer strength select line provide an inviting introduction to hammer strength equipment. dimensions (l x w x h): 58 in x 45 in x 71.5 in (148 cm x 115 cm x 182 cm) weight: 680 lb (309 kg) weight stack weight in kgs: 195frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, hammer strength plate loaded v-squat pl-vsqthe plate-loaded v-squat is designed to have a natural squatting motion, while reducing back and knee strain through a curved arc of motion. it also employs a standard counter balance for lower starting resistance. starting resistance: 54 lbs (24.5 kg) dimensions (l x w x h): 91 in x 42 in x 81 in (232 cm x 107 cm x 206 cm) weight: 530 lb (241 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, signature plate loaded incline press splipthe signature series incline press uses horizontal grips to simulate a more traditional bench press, converging movements for a natural forward pressing motion, and iso-lateral movements for equal strength development. signature series plate-loaded enhances any facility and utilizes independent converging and diverging movements for an instinctively natural experience. dimensions (l x w x h): 50 in x 62 in x 75 in (127 cm x 158 cm x 191 cm) weight: 297 lb (135 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, signature plate loaded decline chest press spldcp dimensions (l x w x h): 51 in x 69 in x 76 in (130 cm x 176 cm x 194 cm) weight: 340 lb (155 kg)"frame colour: standard colour upholstery colour: standard colourworking arm colour: standard colour frame, axiom dual leg extension/leg curl with luxury trim

Vocational Education Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector