Get complete information related to latest W Strap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic W Strap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding W Strap Tenders.
Tender For supply of plumbing material long body bib cock form flow 15mm (make-ess ess croma c2098 , short body bib cock (make ess ess c-2028) , 4 inch butterfly valve (make-zoloto in ss only) , piller cock (make ess ess c-201) , 2 in 1 bib cock (make-ess ess c-2030) , pvc connection pipe 18 inch (make-asian paint , extension (xt) piece 1/2inch x 1 inch , extension (xt) poece 1/2inch x 2 inch , extension (xt) piece 1/2inch 3 inch , angle valve (make-ess ess c-204) , sink mixer (make-ess ess croma c219) , washbasin mixer (make- ess ess croma c-211a) , cp hex-nipple 1/2 inch , cp hex nipple 1 inch , urinal waste coupling 32mm dome cp polished (make-viking) , ewc rimless (make cera) 9 inch wall distance, one piece rimless ewc, celebrate 3d 220 mm cat no.-s1013231, with seat cover, s traps , ewc rimless (make cera) 9 inch wall distance, one piece rimless ewc. one piece rimless ewc with duroplast slim soft close seat cover, 650 x 380 x 720 mm, strap 110 mm, cat no.: s1013235, celebrate 110 mm , single bowl sink with drain board gloss, size: 940 x 457 mm (37" x 18") depth: 203 mm (8"). installation: top mount, cat no.: b4512122g, ss 304, 1 mm ss sheet
Tender For auction sale of light iron scrap & heating element scrap,brass and gun metal scrap,mn steel hammer ring scrap,empty oil drums (iron),electrical item scrap,e- waste scrap,m.s. chips scrap,conveyor belt scrap (old, used & unserviceable),plastic jarican scrap,paper raddi,wooden scrap of packing boxes with attached g.i. strip/sheets & other,empty oil/chemical drums (hdpe)
Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.
Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.
Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.
Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.
Tender For item no. 1: excavation in all sort of strata andformation incl. depositing the unuseful excavated stuff as and where directed incl sorting and stacking useful materials as dirested upto 200 mt lead and all lift etc. complete incl. dewatering. item no. 2 prov. & laying in position" nominal mix" cement concrete using cement, sand, & h.b. metal by mass and machine mix for pcc including necessary formworks, compaction, rming, curing as directed with all lead and lift ect complete.for foundation concrete / other generalpurposeconcrete (1:3:6) metal size -63 mm (cement level 220 kg/cum)item no. 3: providing, cutting, bending,binding and fixing in position as per drawing tmt bar, reinforsment for r.c.c. work and anchor bars incl cost of black annealed 16 to 18 bwg m.s. wireetc. complete with all lead and lift. (b) fe-500.item no. 4: prov. & laying in position cementconcrete using cement, sand and crushed metal coase aggregate by mass and machine mix for pcc/rcc including necessary formworks compaction by vibrater, curing as directed with all lead & lift etc complete. (excluding cost of steel) for, body wall, apron, training wall, side wall, splay wall, ket wall, cut of wall etc.4e) "nominal mix" concrete grade 1:2: and msa-40 mm1item no. 5: prov. & laying uncoursed rubblemasonry in cement and sand mortar by mass and machine mixing incl use of header and bond stones etc and incl scaffolding and finishing to required shape and batter end steps etc as per drawing and racking out the joints, curing etc complete in all respect. for lead lift.a) in c.m. 1:5 for foundation and super structure.b) in c.m. 1:3 for super structure.item no. 6: cement plaster 10 mm thick in single coat to cc/rcc work and brick work on fair side in c.m. 1:3 including finishing, curing, scaffolding, etc. complete.item no. 7: providing and fixing marble plate of 2.54 cm thick including engraving and fillinf ead fo letters as directed.(sorp no. 34) item no- s-35.
Tender For supply of complete disc o flex couplings with specifications as per gem technical sheet , complete coupling for filter water pumps with specifications as per gem technical sheet , complete gear coupling 3 point 7 kw rpm 9 point 3 with specifications as per gem technical sheet , complete gear coupling 3 point 7 kwwith specifications as per gem technical sheet , complete gear coupling 3 point 7 kw rpm 1450 with specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 3 point 7 kwwith specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for point 75 kwwith specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 7 point 5 kwwith specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 996 rpm with specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 980 rpm with specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 11 kwwith specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 18 point 5 kwwith specifications as per gem technical sheet , pin bush coupling along with pin and bus suitable for 15 kwwith specifications as per gem technical sheet , lovejoy coupling for uga 3 with specifications as per gem technical sheet , complete love joy coupling rrl95 with specifications as per gem technical sheet , rubber spider l 110 with specifications as per gem technical sheet , rubber spider l 095 with specifications as per gem technical sheet , rubber strap for sw095 with specifications as per gem technical sheet , complete love joy coupling sw095 with specifications as per gem technical sheet ) /bid number : gem/2025/b/6632580 * /dated: 01-09-2025 & & / bid document 1 / 16