Latest wall cladding Tenders | Government wall cladding Tenders

corporations/Associations/Others

CTN :42485358

21 Jan, 2026 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

21 Jan, 2026 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Central Government/Public Sector

CTN :43252686

15 Jan, 2026 71.84 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of earth work in excavation by mechanical means , filling by brought out excavated earth , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand floors , providing and laying in position specified grade of reinforced cement concrete , shuttering in foundations , shuttering in superstructure columns , steel reinforcement for rcc , applying priming coats with primer , wall painting with acrylic emulsion paint , structural steel work riveted , brick work with common fly ash bricks , half brick masonry with non modular fly ash bricks , 15 mm cement plaster with mix , providing frosted glass panes 4 mm thick , neat cement punning. , painting with synthetic enamel paint , finishing walls with acrylic smooth exterior paint , providing and laying ceramic glazed floor tiles , providing and laying 60mm thick factory made cement concrete paver block , 6 mm cement plaster of mix , providing and fixing on wall face unplasticised rigid pvc rain water pipes , grading roof for water proofing treatment , making soak pit , providing and fixing gi , do gi pipe 20m dia , do gi pipe 25m dia , do gi pipe 40m dia , providing and fixing white vitreous china pedestal type , providing and fixing white vitreous china wash basin , providing and fixing precoated galvanised steel sheet roofing accessories , supplying and applying two coats of white wash , providing and placing on terrace polyethylene water storage tank , providing and fixing ptmt pillar cock , providing and fixing on wall face un plasticised rigid pvc swr , providing and fixing brass bibcock , providing and fixing mirror of superior glass , providing and fixing cp brass shower rose , providing and fixing cp brass shower valve rose , clearing jungle , 30 mm thick factory made polyvinyl chloride , supplying chemical emulsion , providing and applying white cement based putty , laying of one number pvc , supplying and fixing cable route marker , supplying and making end termination , supplying and fixing of following ways surface , supplying and fixing following rating , supplying and fixing dp sheet steel enclosure , supply of exhaust fan , installation of exhaust fan , supply of ceiling fan , installation testing and commissioning of ceiling fan , supply of ceiling fan regulators , supplying of led lights 20w , supplying of led lights 36w , supply of amps switch piano switch , supply of socket , supply of switch , supply of socket outlet , supplying and fixing 3 pin required. , supplying and fixing suitable size gi box , wiring for circuit submain wiring , wiring for circuit/ submain wiring alongwith earth wire , installation testing commissioning of wall bracket , providing and fixing danger notice plate , supplying and fixing metal box , supplying and fixing metal box , providing & fixing fixing metal box , earthing with copper earth plate , providing and fixing 25 gi , providing and fixing of lightning conductor finial , providing and fixing , providing and fixing gi , providing and fixing gi

Central Government/Public Sector

CTN :43289389

19 Jan, 2026 40.00 Lacs

Kamrup - Assam

Tender For corrigendum : repair/ replacement of door, window, wall cladding, ceiling, roofing, floor/ wall tiling, sanitary fittings and other allied works at tamulpur, darranga and hattigor mil stn under ge rangia

CTN :43414033

15 Jan, 2026 10.09 Lacs

Thiruvananthapuram - Kerala

Tender For construction of madakkathara grama panchayath stadium in ollur lac, thrissur- supply and installation of outdoor gym equipment - open gym equipment, od263824/2025-2026 : chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material.foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263826/2025-2026: air walker - supply and installation of air walker having the following specifications: dimensions: (l x w x h) 1190 x 380 x 1244 mm. main frame- ø 88 mm od "b" class gi pipe dually bending design.foundation plate- m.s. round plate of ø 250 mm & 8 mm thick. paddle ø 42 mm od round gi pipe. handle - ø 33 mm od "b" class gi pipe. footrest - cast iron 124 x 296 x 5 mm thick and m.s. plate of 2 mm thick use to support it. top closing cap dome shape made by pp / nylon / hdpe material. closing cap's - pp / nylon / hdpe material. bracket - 8 mm thick laser profile is used to support paddle frame. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brands. pin's ø 25mm m.s. bright bar pin. circlips- a 24 circlips are used for assembly. bearing bushes -ø 60 mm od seamless pipe. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be min m20 cc and design shall be approved by the engineer-in -charge before installation.), od263830/2025-2026 : leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500mm. main frame - ø 114 mm od “b” class gi pipe. foundation plate – m.s. round plate of ø 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is ø 60 mm od “b” class gi pipe. seat frame - ø 42 mm od “b” class gi pipe. leg press back rest should be angled in 120 - 130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest – 380 x 275 x 60 mm thick high- density polyethylene (hdpe) blow molded with m

CTN :43463693

21 Jan, 2026 4.64 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- thanniyam stadium in kallara grama panchayath in vamanapuram lac, thiruvananthapuram- supply and installation of outdoor gym and sports equipment - outdoor gym equipments, od252260/2025-2026 : horse rider - supply and installation of horse rider having the following specifications:dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundationplate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon /hdpe material. remaining frame is made by 48 mm od ?b? class gi pipe. seat frame ?is made by 48mm od ?b? class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od ?b? class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od ?b? class gi pipe. paddle vertical support - 60 mm od ?b? class gi pipe. handle frame- 42 mm od ?b? class gi pipe dually bending design. foot pipe - 33 mm od ?b? class gi pipe. support frame ? 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe.bearing bush closing cap ? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft.foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand.bearing bushes - 60mm od seamless pipe. pin ? made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips ? a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252261/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od ?b?class g.i. pipe. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od ?b? g.i pipe. seat rest pipe ? 42 mm od ?b? class g.i pipe. handle pipe ? 33 mm od ?b? class g.i pipe.footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe ? 42 mm od ?b? class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap ?pp / nylon / hdpe material. seat ? 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252262/2025-2026 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b?class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x296 x 5 mm thick and m.s. plat

State Government

CTN :43530561

31 Jan, 2026 NA

Karvi - Uttar Pradesh

Tender For supply of desktop computer all in one , multi-function color printer , copier , meeting web camera , speaker mic system for meeting table , conference table for u shape office , dias chairs , audience chairs, s type , digital podium with inbuilt pc , file cabinet , almirah for office , operator chairs , air conditioners , writing tables , computer table , wall fan , laptop , projector with motor operated screen , smart interactive panel , laser pointer , conference table microphones , amplifier with mixer , cordless microphones , pa speakers , 55 tv with stand , portable public address system , video camera with adjustable stand , hall divider curtains , water dispenser hot and cold with 2 capsules storage , induction cook top , curtains or doormats , silent generator , false ceiling with led lights , wooden doors with paneling and pelmet , window aluminum slider with wind curtains , wall cladding and paneling , vintage analog watch

Co-operative

CTN :43491443

07 Feb, 2026 50.00 Lacs

Multi City - Karnataka

Tender For supply, installation & commissioning of milk parlour structure on biennial rate contract basis. - acp cladding, sign board, vinyl with sun board branding, supply counter, clippon boards, product display shelfs, frame work, wall paneling, roof paneling, flooring, main door, concrete bedding, electrical, finishing

CTN :43494625

15 Jan, 2026 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

Central Government/Public Sector

CTN :43496240

29 Jan, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For replacing of interior finishing and fixtures of alhw multipurpose hall including painting works of hall exterior and compound wall all over the complex in sri vijaya puram.

Wall Cladding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

Co-operative

Central Government/Public Sector