Latest wall hanger Tenders | Government wall hanger Tenders

State Government

CTN :39789957

11 Apr, 2025 NA

Medininagar - Jharkhand

Tender For procurement of hardware materials for 220/132 kv gss bhagodih

Central Government And Public Sector

CTN :39518383

14 Apr, 2025 14.27 Crore

Chengalpattu - Tamil Nadu

Tender For corrigendum : supply of electrical equipments and installation works of electrical and instrumentation system for oesc at maps site - supply of following pre-fabricated and galvanized cable tray supporting structure materials as per specification, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/ 2002, 2003 & 2004/dd., 22 first rod with m22x55 long threading on one end & m 22 hex nut, isa 65x65x6, 22 rod, isa 65x65x8, ismc 75 channels, couplers (36 odx6 thk.), weld attachment (made of 75x10 thk. plate,320 long), swivel washer seat (46 x16 thk.), swivel washer (40 x16 thk.), iso 1234, 3.5x32 spilit pin, shear bolt m10x70 with hex. head & nut & washer, washer for shear bolt, nut for shear bolt, iso 1234, 3.5x20 split pin, washer (48 , is 2016), 3 mm thick l clamp with m8x30 mm long bolt, 2 plain washer, 1 spring washer and nut, 600mm long, 30 mm wide & 2.5 mm hot dip galvanized strip with two nos of m8x30 mm long bolt, 4 plain washer, 2 spring washer and 2 nuts, installation of cable tray supporting structure including site works such as cutting, drilling, threading, welding, fixing the hardware, touch up painting using zinc rich paint for welded surfaces etc., as per the specification, cable installation note, tender drawing (maps-1&2/01652/2053/ga) and reference drawings nos kapp-3&4/ 21490/2002, 2003 & 2004/dd, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 150 mm width, type- ce, ceiling support for supporting one number of straight run of tray or elbow (1 tier) of 300 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 150 mm width, type- ct, ceiling support for supporting one number of tee accessory (1 tier) of 300 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 150 mm width, type- d2, wall/column support for supporting one number of vertical straight run of tray (1 tier) of 300 mm width, common cable tray and ventilation duct support for supporting 1 tier of straight tray or elbow of 150 mm width, cabling systemsupply of following sizes of 6.6kv/11kv rated, al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed, gi wire/ strip armoured power cables along with steel cable drums, 3cx185 sqmm armoured cable, supply of following sizes of 1100v rated, cu/ al conductor, xlpe insulated, frls pvc (st2) inner and outer sheathed power cables along with steel/ wooden cable drums, 3.5cx400 sqmm, al conductor, armoured cable (gi armour) with steel cable drum, 3cx2.5 sqmm, cu conductor, un-armoured cable with wooden cable drum, supply of following sizes of 1100v/ 650v rated, cu conductor, pvc (type-a) insulated, overall screened, frls pvc (st1) inner and outer sheathed, gi armoured control cables along with steel/ wooden cable drums, 4cx2.5 sqmm, 1100v rated with wooden cable drum, 2cx2.5 sqmm, 1100v rated with wooden cable drum, 4cx10 sqmm, 1100v rated with steel cable drum, 2cx10 sqmm, 1100v rated with steel cable drum, 10px1.5 sqmm, 650v rated with steel cable drum, supply of following medium duty gi pipes/ heavy duty erw rigid conduits/hume pipe for routing cables from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following medium duty gi pipes/ conduits/hume pipes for routing cables (from cable trays to distribution boards or to various field equipment or between equipment as directed by engineer- in- charge), including supply and installation of clamps/ fasteners/ supports, accessories like bends/ couplers along with cutting, threading etc., 100 mm dia pipe, 65 mm dia pipe, 40 mm dia pipe, 25 mm dia conduit, installation of following sizes and types of cable trays and accessories as detailed in drawings and specification including sup

corporations/Associations/Others

CTN :39759612

03 Apr, 2025 6.03 Lacs

Vadodara - Gujarat

Tender For interior / furniture work at dcf, social forestry office, anand - wooden flooring supply & laying of 8 mm to 8.33mm thick laminated wooden flooring, classification of use 31/23 with a surface abrasion resistance of class ac4. 0.2 mm thick wear layer on top of a high density fiber substrate. plank size 1215 mm x195 to 197mm having locking arrangment with an under laying made of natural colour foam, with accessories like end profile, transition profile, reducer, stair nosing, the item including suplying and fixing of skirting profile & door profile to the flooring. etc, complete as per manufacturers specification, detailed technical specifications, drawings and as per the sr.plant/plant engineer, dcf cabin door -glass with full glass door on patch fitting : providing and fixing glass door with patch fitting door as shown in the drg. door shall consist of make 12mm thk. toughened clear float glass / or frosted glass. rate shall include necessary designer film, approved locking systems, ss handle pair, floor springs (heavy duty or equivalent), gaskets & miscellaneous hardware items. including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant. drawings and as per the sr.plant/plant engineer, pvc flooring providing & fixing 1.5 mm thk pvc vinyl planks flooring (204mm x 1239mm) looks best when laid on a beautifully smooth sub-floor, which is easily achieved with the right preparation work total thickness 2.5mm, wear layer 0.7mm,total weight 2.6kg/m sq.flooring prepared european classification 34/42(suitable for very heavy commercial and light industrial use).instaulation & design giving by architect.european classification 34/42(suitable for very heavy commercial and light industrial use), account branch a - partation half wooden partition providing and fixing low height partition with installation as per drawing and 50mmx37mm teakwood framing the skeleton (plywood+glass frame structure) with 18mm x 18mm thick (plywood, conforming is 303 bwr grade) vertical and horizontal plywood (patti) both side cover & top of low height partition 12 mm thk. teak wood arched / border patta with 6mm groove as per design. fixing properly without any air gap and finishing with selected 1mm laminate, before installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., account branch b - new full height storage stroage rack full height storage providing and fixing full height storage up to lintel level, 50mm x 37mm teakwood framing with thick (plywood, conforming is 303 bwr grade) top and shutter 18mm made from post forming in approved shade with vertical and horizontal surface 18mm plywood with inside 0.8mm and outside 1mm laminate finish. all teakwood bidding should be finished by melamine polish with support of s.s. legs, lock, handle, etc. complete as per the architect dwgs, including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., acf cabin a - table & side unit top modification repairing & fixing main table replacement of table top by 6 mm new coariean (dupont or samsung) sheet with proper edge bending and restrengthening of entire table, replacement of drawer channels, locks,handels, keyboard trays etc.including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., curtains a - zibra zibra blind/wooden blind providing and fixing zibra blind curtain of aerolux,vista,neon,mac make or equivalant fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per instruction by engineer in charge with necessary hardware fitting, material and labour etc complete.approoved by engineer incharge and consultant., curtains b - roller a curtain rollar blind provi

State Government

CTN :39769607

27 Mar, 2025 NA

Pune - Maharashtra

Tender For supplying diff type of material - , 6kw solar panel system with necessary hardware materials with fitting and installation asper location including all laborc charges, "2 side semi integrated solar light 24 + 24 = 48wat with fitting and installation as per locationincluding all labor charges with necessary hardware and material including all transport", gi tubular pole 6 mtr with single hole pass- height: 6 meter (20 feet) thickness: 1.2 mm with fitting and installation as per location including all labor charges with necessary hardware and material including all transport, iron garden bench with name printing including transport as per location

corporations/Associations/Others

CTN :39797620

28 Mar, 2025 NA

Bangalore - Karnataka

Tender For auction sale of ms materials, i-beams, angles, mesh iron, bolt &nuts etc.,scrap 24f opgw cable in rings,scrap alluminium hardware parts with bolt & nuts,scrap acsr conductor in rings (such as drake, owl, coyote, linx),scrap aluminium cable in cut pieces/rings with diff.sizes,scrap tyres of diff sizes.,scrap empty steel cable drums 11kv ( approx wt 300kg),pothead end termination of 11 kv class,breakers, link box, switchgear parts, panel box etc,scrap t&p materials,scrap control cable, copper u.g.cable & telephone cable etc.,scrap plastic cans & telephone

CTN :39790915

28 Mar, 2025 NA

Vadodara - Gujarat

Tender For supply and delivery of electrical and hardware materials for hcu revamp shutdown purpose on single bid system in connection with composite works comprising of piping, mechanical, electrical and instrumentation jobs for gds revamp, hcu revamp, aru

CTN :39776352

28 Mar, 2025 4.00 Lacs

Rajsamand - Rajasthan

Tender For all types of tap fittings and other hardware materials

CTN :39699893

24 Mar, 2025 18.00 Lacs

Udaipur - Rajasthan

Tender For supply work of all types of tap fittings and other hardware materials in the municipal area.

Central Government/Public Sector

CTN :39728135

27 Mar, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply of hardware materials at abv-iiitm, gwalior

CTN :38731270

22 Mar, 2025 95.00 Lacs

Bathinda - Punjab

Tender For bid to ras corrigendum : providing of custom bid for services -item rate contract for providing materials required for day-today civil maintenance at aiims, bathinda. - acoustical panelling, adhesive for ceramic tiles, adhesive for wood work, aluminium accessories and hardware, aluminium composite panels, aluminium die-cast handles & two paint locking kit, aluminium, extrusion/sections, aluminium fabricator, anchor fastner/dash fastner, anti-termite treatment, back up rod, ball cock, cement, cement: white, clean room wall, panels with/without return air visers, doors/windows etc, clear glass/clear float glass/ toughened glass, concrete additive, cover/spacer llock, curtain rod/ drapery rod/ venetian filindi, ???? ????? / flor spring, door locks, door seal-woolpile weather strip, dour shutters-flush, doors & windows fixtures/fitting, epoxy hooring, extruded polystyrene board, false ceiling- calcium slicate boards & tiles, false ceiling-metal, false ceiling- mineral libre, fire rated doors & frumes, fire rated glass, fire retardant paint, fire seal, fire: dour closures, mortive dead locks, fire: d-type pill handles, fire: hinges,, fire: panic exit devices, fire: seal, fire: sealant, fire: tower bolts, floor hardenu, glass: float & minor, glass for aluminum doors/windows/ structural glazing

Wall Hanger Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector