Latest wash pump Tenders | Government wash pump Tenders

State Government

CTN :41092051

31 Jul, 2025 18.87 Lacs

Bellary - Karnataka

Tender For construction of security check post & store room at intermediate pump house near ilkal

CTN :40825717

18 Jul, 2025 NA

Parganas - West Bengal

Tender For bid to ras purchase of spares - oring (ms sl-164) , gasket(fig-3250 oblique 02) , key(fig-62) , spring , ring snap , screw driver , collar , gasket header cover , spnr ojde 16x17 , packing (bd eng fig k2)(1set 9nos) , seal o ring (ms sl-128) , washer , pin dowel , hexagon screw , o ring , key(fig no-6015 , sl no-50) , spnr de 20x22mm , terminal battery negative (fig-1035) , bolt , spring(fig-03) , ojde spanner 18x21 mm , spring , positive terminal (ms sl-649) , spring , oil can 1 1 by 2 pint , o ring , o-ring , seal bearing , bushing rubber , gasket(ms sl-139) , flange , adjustable spanner 200mm , plunger inter lock , seal , oil , screw , spring , connection fuel inlet (ms sl-101) , gasket , packing , strainer , clamp , clamp , flexible nut spnr 350mm , spanner 10x11 mm (ojde , open end) , spill tube , hour meter cable , clamp , socket 22 mm(eqpt sl no-g15313) , wrench filter , hose(fig-38) , bolt , o ring , socket 17mm , pin , piston , spnr ojde 32x36mm , connection fuel drain(cum-p30) , tube assy , pre filter assy , ring o cover , screw driver attachment(sl no-g15313) , toggle switch (ms sl-202) , knob , bearing , crnkpin , std(sp) , 1pr , ring , rubber hose lg 72 , spnr ojde 12 x 13 , hose , hose , bearing , rfi capavitor assy , gasket cover , oil cooler , bushing , spnr ojde 18x19mm , 24 mm socket(sl no-g15313) , nut rod (ms sl-06) , 27 mm socket(sl no-g15313) , pinion spring , tube , 30 mm socket(sl no-g15313) , seal oil , sealing ring for 4 (mico) , shaft , clutch inner race(ms sl no-593) , seat (hyd filter) , rachet reversible , joint eye , plug , ring compression , set (oem) , socket 24mm with handle , connector , scraper lh , lever , wrench hook , ring seal , pipe , exhaust , main bearing , thrust , ball brg , cover , hose , head , bush pinion (ms sl-590) , hyd pump service kit , fuel pump , clutch plate , tube , tube , hose(n743) , bearing , ball , regulator (make lucas tvs)(ms) , lever change , adaptor , flywheel , strainer , flyweight assy , solonide switch , solonied switch , relief valve assy , lamp guard rear rh , lever (fig no 3065) , plate , bushing spherical(fig-6086) , adapter , manifold , water , manifold , water , oil , filler , bracket , flange , coupling , water pump service kit , brake(band) assy , hose , housing , drive tachometer , fuel cut-off valve , alternator assy , rod , seal kit , hose , bearing assy , hose (fig no-4512) , gear driven reverse(fig-2125) , lever , cover , shell connecting rod std (ms sl-07) , cover , bearing , ball , gear driven 3rd , trunion assy , rod , mounting flange assy , c ebracket assy , fan , grill , feed pump assy , cyl assy(fig-41) , rod , drum brake , starter (l-tvs -11teeth) , gear assy , idler gear , delivery valve holder , shifter clutch dog(price list sl-836) , pressure plate assy , board floor , idler front , gear and pinion set (counter shaft) , intermediate shaft a , joint (p-141) , camshaft(os sl no-526) , sprocket shaft removal(ctlg sl-14) , main clutch assy , clutch housing assy

CTN :41056070

22 Jul, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of mt store d d - front wind shield , tapper roller bearing , assy ball joint rh threads , assy ball joint lh threads , wheel cyl with citradelip 44.45mm dia , main bearing set , connecting rod bearing , thrust washer , pump assy water , starter kit , handle regulator , ball joint double , ball joint lh , rotor final assy , de bearing , sre bearing , regulator and brush box assy , assy pipe , rep kit air dryer assy , drive assy

CTN :41055917

02 Aug, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of em6150b-5gr-657063 intermediate shaft , em6150b- 2gr-625614 intermediate gear wheel , em6150b-741- 9007-01-4 pressure regulating valve , em6150b-zs-0 tooth coupling , em6150b-741-4590-01-2 pinion shaft with pinion for l o pump , em6150b-nj408 bearing cylinderical roller , em6150b-nj308ec bearing cylindrical roller

CTN :41066789

24 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of pump bearing bush, 42, mthr&plt, pmp , intermediate bearing bush, 22, mthr&plt

CTN :41037847

22 Jul, 2025 12.35 Crore

Begusarai - Bihar

Tender For mgsy/25-26/begusarai/01 - construction of h.l rcc bridge ( 6 x 21.750 m) in between mathar kasimpur kurmi tola road and gupta lakhminiya rcd road under matihani block in the district of begusarai ., excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 225.00 per m for service road., providing and constructing temporary island 16 m diameter for construction of well foundation for 8m dia. well in one water, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. co

CTN :41037844

22 Jul, 2025 13.03 Crore

Patna - Bihar

Tender For mgsy/25-26/balia/01 - construction of h.l rcc bridge ( 8 x 21.750 m) in between t01 se sonwarsha path under shamho akha kurha block in the district of begusarai, excavation for structures , earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. up to 3.00 m depth ., providing and laying cutting edge of mild steel weighing 40 kg per metre for well foundation complete as per drawing and technical specification. as per morth clause no. - 1200&, plain cement concrete in open foundation complete as per drawing and technical specifications pcc grade m -15 below abutment well cap, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification rcc m-35 in well curb, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well bottom plug, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rcc m-25 in well steining, providing plain cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , pcc m-25 in well intermediate plug, well sinking as per technical specification, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), for 7.00 m dia well :; pier, depth 0.00m to 3.00 m (clay soil), depth 3.00m to 10.00 m (sandy soil), depth 10.00m to 20.00 m (sandy soil), depth 20.00m to 30.00 m (sandy soil), sand filling in wells complete as per drawing and technical specifiction. as per morth clause no. - 1207, providing cement concrete /reinforced cement concrete with batching plant, transit mixer and concrete pump as per drawing and technical specification , rccm-35 in well cap, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawing and technical specifications , tmt in foundation , refer bbs ,qty = 67.622+155.612 =223.234 t, confirmatory boring at abutment and pier location, back filling behind abutment, wing wall and return wall complete as per drawing and technical specification, providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification., plain/reinforced cement concrete in sub-structure complete as per drawing and technical specificationsheight upto 5m , rcc grade m30, plain/reinforced cement concrete in sub-structure complete as per drawing and technical specifications ,rcc grade m30 , height 5m to 10m, supplying, fitting and placing hysd bar reinforcement in sub-structure complete as per drawing and technical , reinf , qty = 23.851+24.330+1.762+0.313+1.289+1.139 =, providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., furnishing and placing reinforced/prestressed ceme

Central Government / Public Sector

CTN :41043890

25 Jul, 2025 NA

Begusarai - Bihar

Tender For tender for supply of kepl make pump spares - shaft w/keys , 031 , 039.01 , 039.02 , 039.03 , wear ring , imp , pmp , 250x150 r 2 dm 45 , kepl , cvr , brg , nde , 250x150 r2 dm 45 , bearing nut , p/n-129 , cvr , brg , de , 250x150 r2 dm 45 , throat bush , p/n-082 , impeller nut , p/n-048-1 , impeller nut , p/n-048-2 , brg bkt ( de & nde) , u/n pr06017003011zz , bearing (housing) - , p/n051 , nut , brg , pmp , p/n-129 , gland cover - i , p/n018.1 , gland cover - ii , p/n018.2 , shaft p/n-031.00 , stub sleeve part / no 042.01 , bearing guard (de+nde)part/no 093.03 , wear ring , case , nde , p/n-107.01 , lock , nut , bearing , p/n-129.00 , washer lock bearing , , p/n-136.00 , imp , pmp , p/n-021 , kepl , shft , pmp , p/n-031 , kepl , gskt , o-ring&pkg , 50x40 ucwm 16 , ring , labyrinth , pmp , 50x40 ucwm 16 , kepl , oil ring , p/n 67 , 80 x 50 uwm 32 , kepl , bearing cover de , p/n 53.1 , bearing cover nde , p/n 53.2 , deflector , pmp , p/n-93 , gland cvr-ii p/n-018.2 , gland cvr-i p/n-018.1 , gskt , case , pmp , p/n-117-1 , shft , pmp , 150x100ucwm 40 , kepl , shft with key , pn-031 , astm a276type 410t , shft with key , pn-31 astm a276type 4140 , bottom casing sleeve , p/n 43.01 , impeller , p/n 21.1 , inpeller 2nd to 3rd stg , p/n 21.2 , interstage sleeve , p/n 43.2 , interstage sleeve , p/n 43.3 , throat bushing sleeve , p/n 43.5 , intermediate brg sleeve , p/n 43.6 , throat bush , p/n 82.0 , o ring , 1st stg , p/n 115.4 , o ring , column pipe , p/n 115.6 , intermediate brg bushing , p/n 81.03 , distance sleeve , p/n 45.06 , wear ring , 2nd to 3rd stg imp , p/n 25.2 , wear ring , 2nd to 3rd stg imp , p/n 25.3 , intermediate brg bushing , p/n 81.6 , split ring(line shaft coupling) , p/n-046 , oil flinger , p/n 68.00 , brg.guard , p/n 93.03 , brg.guard , p/n-93.04 , case wear ring , 1st stg , p/n 107.1 , gasket , discharge head , p/n 117.22 , gasket , brg cover , p/n 117.08 , gasket oil reservoir , p/n 117.38 , line shaft coupling , p/n 142 , bearing locknut , p/n 129 , 100 x 80 vpcs 3m , bearing lock washer , p/n 136 , distance sleeve , p/n 43.0 , bottom casing bushing , p/n 81.1 , coloumn pipe , u/n pv99173001120zz , column pipe , u/n pv02173013120zz

Central Government / Public Sector

CTN :41044089

21 Jul, 2025 NA

Panipat - Haryana

Tender For supply of ncm2513042 wilo mather make pump spares : : - top shaft p n 1804 , rising main pipe top p n 1152 , intermediate brg bush p n 2801 , solid muff coupling p n 2050 , shaft p n049 , casing p n029 , casing top half p n1001 , casing bottom half p n1002 , bearing distance sleeve p n2780 , impeller p n1504 , bare shaft assembly , int brg bracket p n2800 , imp sleeve p n2832 , int brg sleeve p n2834

corporations/Associations/Others

CTN :41087873

11 Aug, 2025 NA

Kolkata - West Bengal

Tender For procurement of 27 nos. new pcs and 9 nos. new hls along with 5 years operation and maintenance of the same under south zone of kolkata including periodic overhauling and maintenance of the shutter and washing pump of the respective compactor stations (cs).

Wash Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

Central Government / Public Sector

corporations/Associations/Others