Latest water filter cartridge Tenders | Government water filter cartridge Tenders

Central Government/Public Sector

CTN :40665491

25 Jul, 2025 NA

Goa - Goa

Tender For corrigendum : supply of hvac sensor and fittings for ventilation system e e - electromagnetic coil be 220v hz 50 ip67 with latch , latched magnetic coil be 380v 50hz ip67 , solenoid valve g3 by 4 ev220v epdm seal , solenoid valve g11by4 ev220v epdm seal , solenoid valve g2 ev220v epdm seal , filter g13by4 type y222 , filter g11by4 type y222 , filter g2 type y222 , thermostat kps 76 , thermostat kps 77 , sleeve l160 for thermostat kps , set of seals for thermostat kps , aluminum thermo-conductive compound for thermostat kps tube , assembly tape for thermostat kps l 392 mm , on board spares as per h-ta no.h-ta-460000- 104 annexure a-1 itemwise unit rate to be provided , on board spares as per h-ta no.h-ta-460000-104 annexure a- 2 itemwise unit rate to be provided , on board spares as per h-ta no.h-ta-460000-104 annexure a-3 itemwise unit rate to be provided , on board spares as per h-ta no.h-ta- 460000-104 annexure a-4 itemwise unit rate to be provided

CTN :40808350

24 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length

Central Government/Public Sector

CTN :40636354

18 Jul, 2025 4.90 Crore

Goa - Goa

Tender For bid to ras bid to ras armo 2025 27 sh operation and maintenance of hvac system at split at goa airport - manpower for operation and day to day maintenance , camc 4nos x 600 tr chiller , camc 1no x 400 tr chiller , camc anciliary equipments of hvac system , treatment and analysis of hvac condensor water , treatment and analysis of hvac chilled water , supply and replacement of chiller compressor lube oil for carrier make , supply and replacement of chiller compressor lube oil for blue star make , replacement of old worn out ahu air filter with new filter , cmc of ahu fire smoke damper, control panel, actuator , replacement of ci butterfly valve for condensor chilled water including dismantling of faulty valve-500 mm dia valve , replacement of ci butterfly valve for condensor chilled water including dismantling of faulty valve-400 mm dia valve , replacement of ci butterfly valve for condensor chilled water including dismantling of faulty valve-350 mm dia valve , replacement of ci butterfly valve for condensor chilled water including dismantling of faulty valve-300 mm dia valve , replacement of ci butterfly valve for condensor chilled water including dismantling of faulty valve-150 mm dia valve , supply,fabrication,installation, testing and commissioning of site fasbricated gss sheet thickness 24 swg , supply,fabrication,installation, testing and commissioning of site fasbricated gss sheet thickness 22 swg , supply,fabrication,installation, testing and commissioning of site fasbricated gss sheet thickness 20 swg , supply and fixing 50 mm thickness closed cell nitrile rubber with insulation provided with uv protected aluminium based cladding with cold setting adhesive on exposed outdoor ducting , supply and fixing 50 mm thickness closed cell nitrile rubber with insulation with factory laminated aluminium foil by applying suitable cold setting adhesive on indoor ducting above false ceiling , cmc of existing uvgi ultra violet germicidal irradiation system provided inside ahu exluding uv lamp reflector and uv ballast. , supply of uv lamp for existing uvgi provided inside ahu , supply of reflector for existing uvgi provided inside ahu , supply of uv ballast for existing uvgi provided inside ahu , cmc of car parking ventilation system installed at mlcp including axial flow type jet fans , cmc of window split type airconditioners cassette type of all makes of 1 point 5 ton 2 ton capacity with single phase supply at different locations including providing for first year , cmc of window split type airconditioners cassette type of all makes of 1 point 5 ton 2 ton capacity with single phase supply at different locations when required for second year , comprehensive maintenance contract of split multi split type cassette typetower type airconditioners of all makes of 3 ton capcity with 3 phase supply etc as and when required for first year , comprehensive maintenance contract of split multisplit type cassette type tower type airconditioners of all makes of 3 ton capcity with 3 phase supply etc as and when required for second year , cmc for vrf system indoor unit varying from 1 ton - 2 ton installed in new admin block , cmc for vrf system indoor unit varying from 3tr installed in pre security area , cmc for vrf system indoor unit varying from 4tr installed in pre security area , cmc for vrf system indoor unit varying from 4tr installed in 1st floor mlcp cisf portion , cmc for vrf system indoor unit varying from 4tr installed in 2nd floor mlcp, aai offices , cmc for vrf system indoor unit varying from 2 ton and cassette unit of 3 ton installed in apron control room. , comprehensive maintenance contract for vrv variable refrigerant volume system consisting of 03 nos of 3point2 tr cassette ac indoor unit, including all related accessories installed in aocc room , comprehensive maintenance contract for vrv variable refrigerant volume system consisting of12 nos outdoor units of 17point7kw each rating, installed in present dsha , comprehensive main

CTN :40821460

24 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m

Central Government/Public Sector

CTN :41103750

06 Aug, 2025 NA

Perambalur - Tamil Nadu

Tender For supply of filter assly for oil cooler ventilation

corporations/Associations/Others

CTN :41080735

29 Jul, 2025 13.11 Lacs

Multi City - Karnataka

Tender For supply of safety equipment and uniforms to ugd helpers working in tcc and tools and equipments for ugd vehicles-?? ????? ? ????safety equipment for ugd assistants working in your municipal corporationand uniforms, and u.g.d. branchvijay aggarwalinstrumentssupplying (tools and equipments)sl.no.description of item123supplying of uniform: made with durable fabriclike polycotton, a plain design, including tcc logosupplying of safety helmets: helmets shell should be done shaped, smoothfinish and no metallic components are to be used made with high quality poly carbonate. brim diameter should be 6mm, peak 50mm. helmet should have slots for ventilation. number of holes should be more than 3 but the average area of all holes should not exceed 300mm2.made with high quality poly carbonate it should match the as is 2925:1984 specification standardsupplying of rubber gumboots: a durable, waterproof upper and sole, slip-resistant tread, andpotentially a steel or composite toe cap for impact protection. other important aspects are comfort features like a soft lining and a supportive insole, and compliance with relevant safety standards like is 15298 part-ii.4supplying of safety shoes: safety features such as toe protection, penetration resistance, slip resistance, and electrical properties. these specifications ensure the footwear provides adequate protection against workplace hazards. safety shoes should meets the specifications as per standards like is 15298 (part 2) and en iso 20345,supplying of n-95 mask: an n95 mask, should be adheres to the specifications outlined in is 9473:2002, - filtering half masks. this standard specifies the requirements for filtering half masks, 5 including their design, performance, and testing procedures. n95 masks meeting this standard are designed to filter at least 95% of airborne particles. a minimum 95% filtration efficiency against certain non-oil based particles, and a close facial fit to minimize leakage.unittotal quantityrates amounteach168 2200.00369600.00each84450.0037800.00each 64600.0038400.00each201100.0022000.00each2016 70.00141120.006789supplying of heavy duty rubber hand gloves: heavy-duty rubber gloves are designed for robust protection against chemicals, mechanical risks, and punctures they are commonly made from nitrile or natural rubber and often feature a cotton lining for comfort. it should meets the standard requirements of is 4770:1991supplying of cloth aprons 14-07-2025: (reflective jackets): 100% polyester 3 ply sewing thread of matching colour, h-vis reflective material, durable, breathable, lightweight and machine washable reflective material will be high visibility warning garments with synthetic slide fasteners, micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material. reqired size and colour (yellow and orange) and it should meets the standard requirements of is 15809:2017supplying of heavy duty rain coat: raincoat should be waterproof, comfortable, lightweight, and have a hood. it should also be durable, with sealed seams and good breathability. and it meets the specifications, as per indian standards, are detailed in is 2422 : 2015supplying of cast iron crow bar: made of high-carbon steel can also be used. length: varies depending on application, with common lengths being 24, 30 inches, or 5-6.5 feet for greater leverage. cross-section: often hexagonal, octagonal, or round end shape: one endisusually pointed or beveled, while the other may be flat, clawed, or angled for different prying or demolition tasks weight: varies based on length and material, but generally ranges from 7 to 9 kg. hardness: heat-treated to a minimum hardness value, such as 320 hv, for durability. ndit meets the specifications, asper indian standards, are detailed in is 704: 1984supplying of spade or hoe with handle : made with high corbon steel and flat, sharp-edged 10 blade and a long handle. it's distinct from a shovel, which has a more curved, scoop-lik

Central Government And Public Sector

CTN :41081634

11 Aug, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of filter assly. for traction motor ventilation as per clw specn. no. clw/ms/3/012, part i, i i,iii, alt-6 and clw drg. no. 1209.11- 135.122 alt-2,. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :41029953

21 Jul, 2025 33.78 Lacs

Rawatbhata - Rajasthan

Tender For assistance in preventive maintenance and minor repair works of ventilation systems and other equipments such as supply and exhaust fans, air washer units, pre filters and hepa filter banks and associated valves and dampers in module-2 of pfff at nfc

Central Government/Public Sector

CTN :41025854

31 Jul, 2025 NA

Mumbai - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; total price including all applicable taxes and duties for removal and replacement of gt air intake filter, ventilation filter, gas filter elements an..

Central Government/Public Sector

CTN :41080342

01 Aug, 2025 NA

Delhi - Delhi

Tender For supply of filter assly for oil cooler ventilation as per clw spec no.clw/ms/3/012,part-i.ii.iii, alt-6 or latest and clw drg.no.1209.11.135.123 alt-3 or latest (abb no.ia 111-00014 & ia 116-0003 or latest)

Water Filter Cartridge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors