Latest water proofing paint Tenders | Government water proofing paint Tenders

Central Government/Public Sector

CTN :36260015

18 Jun, 2024 NA

Chennai - Tamil Nadu

Tender For 1. supply and application of one coach set of wet on wet modified exterio r paintingsystem for push pull coaches as per specification mmdts- 18034-rev-02 & ad ditional requirements to mmdts # 18034 rev-02 issued on 11/2/2020. 2. the finish coat (to p colour coat) shall be umbra grey to ral-7022, beige grey to ral-7006 and bright re d orange to ral- 2008. 3. complete marking particulars on sidewalls and end walls o f the alloted coaches as per the relevant drawing. 4.final colour scheme should b e obtained from icf before supply. pcrt of paints. 1. degreaser - 02 litres. 2. light weig ht body filler mdts- 176-rev-04 - 16 kgs. 3. adhesion promoting primer to spec-mdts-482 79-rev-02 - 80 litres. 4. unsaturated polyester based knifing putty (twopack) compatibl e to wet on wet system to mmdts-18034-rev-02 colour grey - 32 kgs. 5. pu based surfac er (two pack)on side walls and roof to mmdts-18034-rev-02- 40 litres. 6. pu based top co at umbra grey to ral-7022 to mmdts- 18034-rev-02 -20 litres. 7. pu based top coat beige g rey to ral-7006 to mmdts- 18034-rev-02 - 30 litres. 8. pu based top coat bright red orang e to ral- 2008 to mmdts- 18034-rev-02 - 30 litres 9. pu thinner compatible with pu paint sys tem offered - 60 litres. 10.wet on wetpuclearcoat -10 litres. 11.antigraffiti clear coat t o rdso/m&c/pcn/127/2009 rev-01- 2 litres. [ warranty period: 72 months after the date of delivery ]

Central Government/Public Sector

CTN :36258508

18 Jun, 2024 43.60 Lacs

Chandimandir - Haryana

Tender For addn / altn to veer smriti at chandimandir - surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil, complete all as specified and directed., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by engineer-in-charge., plain cement concrete 1:4:8 type d-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed., reinforced cement concrete type a-1, 1:1 :3 (nominal mix, using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed (reinforcement shall be measured and paid for separately)., reinforced cement concrete type a-1, 1:1 :3 (nominal mix, using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed (reinforcement shall be measured and paid for separately)., reinforced cement concrete type a-1, 1:1 :3 (nominal mix,type a-1, using 20mm graded crushed stone aggregate) as in beams, cantilevers , bressumers,lintels over 1.5m span, (reinforcement shall be measured and paid for separately), complete all as specified and directed ., form work to sides of pillars, coloumns and similar items (square, rectangular or polygonal) including edges rough finished surface of concrete flat complete all as specified and directed., form work to sides and soffits of floor or roof beams, beam hanunchings, girders, shelves including supports, overhangs etc also splays between floors and beams etc rough finished surface of concrete flat complete all as specified and directed., brick work with sub class b bricks straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed., mild steel high strength deformed tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed., all as per serial item no 10 herein before but 6mm to 8mm dia -ditto-, 15mm thick rendering in cement and sand mortar 1:4 over brick or concrete surfaces finished even and smooth with using extra cement complete all as specified. , taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed., dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in cm 1:4 complete all as specified and directed., supply only integral waterproofing compound, all as specified., preparation of new surfacs and applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, including 2mm thick (average) wall care putty and sand papering, complete all as specified & directed by engineer-in-charge., preparation of old surfacs and applying one coat of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10

Central Government/Public Sector

CTN :36108853

12 Jun, 2024 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply and apply of anti-graffiti, 'pu paint exterior including roof in 500 nos. lhb coaches.

CTN :36245765

15 Jun, 2024 NA

Kamrup - Assam

Tender For supply of ug comd post - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20 mm graded , coarse aggregate 40 mm graded , coarse aggregate 63 to 90 mm graded , stone for rr masonary less than 6 inches , mild steel bars of size 8 mm dia conforming to is 432 part i of 1982 make tata or sail or jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i of 1982 make tata or sail or jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i of 1982 make tata or sail or jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i of 1982 make tata or sail or jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia , app based polymeric membrane weighing 3kg per sqm and 3mm thick not less than 150 gms per sqm land on primed surface by forced application complete all as specified , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses or purlin or rafter and ms plate etc and ms rhs of size 80x40x3.2 all as directed make tata or sail or jsw , ms frame work for roof trusses or purlin or rafter and ms plate etc and ms rhs of size 15x25x2.9 all as directed make tata or sail or jsw , ms frame work for roof trusses or purlin or rafter and ms plate etc and ms rhs of size 96x48x3.2 all as directed make tata or sail or jsw , ms frame work for roof trusses or purlin or rafter and ms plate of size 8 mm thick all as directed make tata or sail or jsw , ms frame work for roof trusses or purlin or rafter and ms plate of size 10 mm thick all as directed make tata or sail or jsw , ms frame work for roof trusses or purlin or rafter and ms plate of size 12 mm thick all as directed make tata or sail or jsw , ms frame work for roof trusses or purlin or rafter and ms plate etc and ms angle of size 40x40x6 for cleat all as directed make tata or sail or jsw , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed , ms flat iron 40x5mm thick for wind tie make tata or sail or jsw , iron welding rod confirming to is 814 2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645 2003 make pidilite or dr.fixit or fevicol , quick setting compound make pidilite or fevicol or quick fix , cement based paint snowcem make berger or asian or nerolac , oil bound distemper washable quality of proprietary brand of make nerolac or berger or asian , birla white wall care putty water resistant white cement make nerolac or berger or asian , ppgi roofing sheet 10 x 3 long 0.63 mm thick min coating of 4 to 5 micron epoxy primer and 18 to 20. the pre coated gi sheet confirm to is 14246 1995 make unifix or jindal mectec or euinalent , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make uniix or jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5 2004 make berger or asian or nerolac , painting brush 4 inches isi marked , nails various size , self taping steel screw half thread with rawl plug of 1.5 inches size isi marked 100 nos pkt , anodised aluminium door 1000 mm x 2100 double shutter with frame including all fittings and as directed make jindal or hindalco or aluminium section weighing 0.55 kg per mtr , anodised aluminium window triple track 2 track glass and 1 track wire mesh size 1000mm x 1000mm inc all fittings and as directed make jindal or hindalco aluminium weighing 0.55 kg per mtr , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick including all fittings and as directed make jindal or hindalco aluminium

Central Government / Public Sector

CTN :36234221

06 Jun, 2024 NA

Allahabad - Uttar Pradesh

Tender For providing tv showcase cabinet and crockery cabinet in d and c blocks and application of heat resistant paint on the roof of all residential blocks at new pipeline colony, allahabad

Central Government/Public Sector

CTN :36233312

17 Jun, 2024 NA

Multi City - Bihar

Tender For supply of lower spring beam arrangement to drg.no.t-0-5-667/col.i, alt -'k' and confo rming to icf/md/specn.094 rev.00. the firm shall fulfill the requirements as per icf/m d/specn.147 rev.02. with amendment no.1.%a0finished items shall be packed in wooden crates to avoid paint damage during transit and machined%a0surfaces to be rust p roof oil coated and covered with bio degradable plastic sheets. the item%a0shoul d be coated with two coats of high performance anti corrosion epoxy coating (tw o packs)%a0green finishing to rdso specn:m&c/ pcn/123/2018 rev.02 [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :36231072

12 Jun, 2024 19.43 Lacs

Danapur - Bihar

Tender For special repair to incl plastering, distempering joinery work replacement of broken doors and windows acrylic weather proof paint roof treatment in building no p153 museum at brc danapur cantt

State Government

CTN :36216785

24 May, 2024 NA

Radaur - Haryana

Tender For cement concrete flooring providing and laying, providing and laying cement concrete flooring, cement plaster, exterior finishing wall and roof surfaces, tubular sections structural steel work,finishing works painting with synthetic enamel paint of approved brand and manufacture of required colour

State Government

CTN :36216786

24 May, 2024 NA

Radaur - Haryana

Tender For providing and laying of cement concrete flooring, cement plaster, exterior finishing wall and roof surfaces, supply and fixing windows frames,tubular sections structural steel work,rolling/collapsible/sliding door shutters providing and fixing, finishing works painting with synthetic enamel paint of approved brand and manufacture of required colour

State Government

CTN :36216787

24 May, 2024 NA

Radaur - Haryana

Tender For cement concrete flooring providing and laying, cement plaster, exterior finishing wall and roof surfaces, sigle/built-up steel/tubular sections structural steel work, finishing works painting with synthetic enamel paint of approved brand and manufacture of required colour

Water Proofing Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors