Latest water proofing repair Tenders | Government water proofing repair Tenders

CTN :41507887

06 Sep, 2025 42.34 Lacs

Multi City - Karnataka

Tender For annual maintanance of water supply materials to water supply section in cmc hosakote limits - dia pvc tee 50mm, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover) 50 mm.dia, supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as per is 694-1990 with isi mark and as per its latest amendments.1x3x6 sqm., providing,supplying to work site, submersible pump set of 150mm dia suitable for bore well and confirming to is 803420003phase ss bowl & impeller with low volt motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. for 20.00 hp - 135 lpm 350 m 25 stg outlet dia 2.00, di elbow.6 inch, ms flange.4 inch, ms flange.3 inch, ms flunge.2 inch, sewage hose pipe.3/4 inch, gi pipe.3/4, solvent cement for ws, non return valve heavy duty.2 inch gm, gland packing batti.10 mm, pvc elbow.8inch, hemp rope., g.i pipe c class 33kg 2 inch, outdoor panel board box 5x3x1 feet french door lock double door lock system.18 gauge, g.i tap.3/4 inch, pipe wrench.24 inch, chiniki., lock.60mm, lead., providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, for sluice valve of pn -10.0 and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest for sluice valve of for sluice valve of pn -10.0 and 150mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest amendments only. the stem sealing should complete for sluice valve of for sluice valve of pn 10.0 and 100mm, chain rinch.24 inch, end cap.8 inch, gm gate valve isi make.2 inch, c.i.pipe.6 inch, pikaxe ., axa blade., bolts and nuts.1/2 inch, bolts and nuts.3 inch, bolts and nuts.4 inch, bolts and nuts for valves., crow bar., grease. for ws, gi pipe.1 1/4 inch, g.i clamp set.2 inch, g.i plunge set.2 inch, g.i bore cap.2 inch, g.i pipe b class 29 kg.2 inch, pvc tail pieces.6 inch, pvc tail pieces.4 inch, pvc tail pieces.3 inch, pvc tail pieces.2 inch, pvc reducer.4 inch x 2.5 inch, pvc reducer,4 inch x 6 inch, pvc reducer. 3 inch x 2.5 inch, pvc reducer.3 inch x 6 inch, pvc reducer. 3 inch x 4 inch, pvc reducer.2 inch x 2.5 inch, pvc reducer.2 inch x 3 inch, pvc reducer 160 mm dia., pvc reducer 140 mm dia, pvc reducer 110 mm dia., pvc reducer 90 mm dia., pvc reducer 50 mm dia, supply and delivery at site special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark with its latest amendments, pvc saddle. 6 inch x 1/2 inch, pvc end cap. 6 inch, pvc collar.6 inch, pvc saddle.4 inch x1/2 inch, pvc end cap. 4 inch, pvc saddle.3 inchx1/2 inch, pvc end cap 3 inch., pvc saddle. 2.5 inch x1/2 inch, pvc end cap.2.5 inch, pvc saddle. 2 inch x 1/2 inch, pvc end cap. 2 inch, pvc m.t.a. 2 inch, pvc f.t.a 2 inch, xlpe 1.1 kv, or heat resistant pvc insulated, pvc exutruted inner seath armoured ltug cable25 sqmm, 4 core,, pvc reducer 75 mm dia., pvc reducer 63 mm dia., xlpe 1.1 kv, or heat resistant pvc insulated, pvc extruded inner seath a

Central Government/Public Sector

CTN :41596971

16 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req

Central Government/Public Sector

CTN :41576348

15 Sep, 2025 45.00 Lacs

Srinagar - Jammu And Kashmir

Tender For ge (af)/sgr-47/2025-26 repair / maintenance of eot crane, low voltage switch gear, panels, bus bar including cabling work, perimeter lighting infrastructure including replacement of flame proof wiring in dbs, external water supply, external electric

Central Government And Public Sector

CTN :41589383

04 Sep, 2025 NA

Tinsukia - Assam

Tender For supply of self propelled heavy duty motor trolley complete set for b.g rail track. heavy duty motor trolley is used by railway officials for track inspection and to reach accident/work site quickly. trolley is capable of working in typical railway environmental conditions. the trolley has seating arrangement in front and rear. technical specifications: - sl. no. description specifications (01.) engine 10 hp, diesel/petrol engine of reputed brand (electric start & rope start) (02.) fuel tank minimum 10 to 15 liters. (03.) wheel dia 400 mm approx. (04.) wheel base 1200 mm approx. (05.) wheel gauge 1650 mm approx. (06.) track gauge 1676 mm (07.) axle length 1865 mm approx. (08.) max. speed 40 to 50 kmph (09.) dimensions 2020 mm x 2030 mm (approx.) (10.) weight 400 to 450 kg approx. (11.) seating capacity (4 + 4) (12.) pay load minimum capacity 1.0 ton (13.) brake mechanical hand brake (14.) back light: 2 nos and head/front light :2 nos (15.) transmission chain drive (16.) battery 12 volt (17.) horn electronic horn (18.) audibility of horn 200 meters (approx.) (19.) sun shed made out of good quality canvas on steel pipe (20.) gear box compact with engine and differential for reverse and forward movement at same speed (21.) foot rest made out of appropriate section for comfortable sitting and vision (22.) detachable hood: made out of water proof canvas. (23.) the trolley should have proper suspension system to give good riding at designed speed. (24.) trolley shall be supplied with a complete kit of tools required by the operator in emergency/normal working ofthe machine. (25.) trolley shall be supplied with (a.) a chain with pad lock (b.) one no v-belt/chain (c.) one no spark plug (d.) clutch and brake wire with locks-one no (e.) any other spare as the manufacturer deems necessary for service/running of the trolley for twelve months initially. make :- r.n engineering / ktm track india or superior.

CTN :41520319

10 Sep, 2025 NA

Budgam - Jammu And Kashmir

Tender For supply of wall paneling items c c - primer for water proofing treatment conforming to is 3386 1986 , non skid water proofing silica panels 400x400mm x 7-8mm , water proof floor silica panels 300x300mm x 7- 8mm thick , water proof floor silica panels 400x400mm x 7- 8mm thick , water proof floor silica panels 600x600mm x 10mm thick , acrylic sheet 4 feet x 3 feet x 3mm , acrylic sheet 6 feet x 4 feet x 4mm , wooden wall panelling of size 4 to 6 mm thick and scantling of size 11 by 2 inch x 2 inch for frame work including supply of sufficient qty of nails , sealing compound grade a , glass putty

State Government

CTN :41009893

03 Sep, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of various carpentry work material for day to day maintenance work in colony area of wtps. - water proof plywood sheet-12mm thick-8x4, water proof plywood sheet-19mm thick-8x4, ten takora khatkhat lock, fibre mould built in shelf mirror, malasian kapoor wood of any different size and section of various members of doors, windows, ventilators etc.

Water Proofing Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government