Tender For corrigendum : ca no. ge af no.1 / gur-35 / 2026-27 repair/replacement of roof, waterproofingtreatment, roof sheets, chajja, grit wash plaster and other connected works in airmen mess, sncos mess, dsc line, dsc md accn, madhur milan, offrs mess and offrs living - repair/replacement of roof, waterproofingtreatment, roof sheets, chajja, grit wash plaster & other connected works in airmen mess, snco's mess, dsc line, dsc md accn, madhur milan, offrs mess & offrs living accn area of 13 brd and 16 brd at af stn palam under ge (af) gurgaon no. 01
Tender For corrigendum : ca no. ge af no.1/gur-34/2026-27 repair/ replacement of flooring, sanitary fitting, joinery, roof, waterproofingtreatment, chajja, grit wash and other connected works at mes installations at af stn palam under ge (af) gurgaon no 1.
Tender For corrigendum : repair and replacement work related flooring joinery waterproofingtreatment and other miscellaneous br work at inf museum inf mess inf guest room single offrs accn dsomi dsomi guest room and outer area of inf school area of age br ii mhow under ge mis mhow
Tender For urgent need for carrying out civil works at switchgear steel store mehrauli and face lifting of contr room building store room building and civil office building along with waterproofingtreatment finishing of boundary wall at 220 kv patparganj
Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for waterproofingtreatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral waterproofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut
Tender For supply of various ornammental items at designer kitchen of rajbhawan jaipur - supply of heritage look cast iron vertical column to support the shade structure. the complete column must be in cast iron with internal steel pipe of od76mm in 4mm thickness going through for strength. the pillar consists of bottom base of height 1170mm having base plate diameter 360mm with a spiral part of height 470mm and crown shape model on top of height 250mm. making overall height 2450mm. overall weight not less than 140 kgs. all the parts are grinded, primered and designed as per approved sample by engineer incharge, supply of ornamental cast iron spandrel (l-bracket) having length 460mm & height 400mm suitable to the coloumn pillars. all the parts are grinded, primered. all the designs & sample will be approved by engineer-in-charge, supply of the frieze (top panel) having the dimensions 320mmx210mm is mounted on steel pipe frame of size 40mmx25mm and all welding joints and gaps grinded and filled properly for smooth surface finish. all the parts are grinded, primered and approved by engineer in charge (length 7.50 feet = 1 frieze.., supply of floral design ms sheets in 3mm thickness. the design is cut out on fiber laser cutting machine using laser beam. the sheet is then properly grinded to give smooth surface finish. 6mm holes along with countering must be provided at every 2ft gapin the sheet for installation purpose., 81.5 x 5 , 81.5 x 4.5 , 80 x 5 , 96 x 5 , 95 x 5 , supply of traditional clay oven made of natural clay mixed with sand, hay and cow dung with smooth exterior in barrel or roundedcylinder shape. size 31" height & 25 " dia., supply of fire brick stone of size 600mmx300mm x75mm used for furnace lining, cement & lime kilns etc. it should have heal resistance > 1300 c & weight 25 kg to40 kg., supply of single groove roofing tile of clay material kelu of size 15"x9" thickness 15- 18mm & weight per kelu approx 2100 kg, colour red/brown/orange as per required by raj bhawan authority & approval by engineercharge, supply of land scaping colourfull natureal stone different colout red blue black white. as per requirement of site 5 to 15 mm in roudn oval shape and whitout sythetic coating
Tender For waterproofingtreatment work on terrace in government residential and non residential building under section no. 2 and 8 of the west sub division, p.w.d. bhopal.