Web Analytics Made Easy - StatCounter

Waterproof Carrying Case Tenders

Get complete information related to latest Waterproof Carrying Case Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Waterproof Carrying Case Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Waterproof Carrying Case Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :44331413 Due date: 17 Mar, 202617 Mar, 2026 NA
Tender For corrigendum : supply of led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , plasticized pvc tapes with nonthermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , xlpe cable for working voltages up to and including 1. 1 kv as per is 7098 (part 1) (q2) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , led batten light (led tube light) (v2) (q2) , recess mounted luminaires square type down light luminaires nw ww 18 watt suitable for various celling type , recess mounted luminaires round type down light luminaires nw ww 18 watt suitable for various ceiling types , convex mirror stockhawkers 100cm size convex mirror with ss pipe 65mm dia grade 304 of ht 6 feet to support with clamping accessories , post delinater road safety delinater of ms with powder coated pipe and polycarbonate body of size 48mm x 700mm , retro reflection sign board of size 4 feet x 3 feet made up of 3mm thick acp sheet face to be fully , ready mix bituminous mix bitumen pre mix concret 25 kg each bag ) /bid number: gem/2026/b/7321540 * /dated: 05-03-2026 & & / bid document1 / 34

CTN :44445195 Due date: 23 Mar, 202623 Mar, 2026 10.00 Lacs
Tender For supply of frame , brushless motors , 13 inch propeller set tri blade , flight controller , esc , fpv camera , gps module with compass , li ion battery pack , optical fiber spool 5 km length , optical fiber air , ground unit , express lrs dual band receiver , fpv goggles , radio controller , spare li ion cells , hard case , safety mechanism and detonation , payload holder , allied accessories

CTN :44481057 Due date: 20 Mar, 202620 Mar, 2026 NA
Tender For auction sale of others - condemned balance brick work and wooden parts of 1] turning and fitting section shed [sl 26], 2] press hammer section shed [sl 25], 3] wagon shop, casnub bogie , sp shop [sl 28] and 4] point and crossing shop [sl 29] of burn standard co limited, howrah. this lot will be sold excluding all types of ferrous and non- ferrous materials , reinforcement released from rcc , chimney, different machines and machine parts of mechanical and electrical department, transformer & other equipment, outside boundary wall, psc sleeper, other p.way items, ms & plastic drums, wooden pattern , etc, total qty- 01 by lot. as per visual estimation , the lot consisting of approximately 2283.64 cum brick works and 9893.12 kg wooden work [this quantity is indicative only, lot will be delivered in by lot basis]. condition-1] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 2] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 3] purchaser should ensure to keep a safety banner around the work spot. 4] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 5] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 6] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 7] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.8] no explosives can be used for demolishing, 9] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use, 10] materials will be sold on "as is where is" basis.

CTN :44481053 Due date: 20 Mar, 202620 Mar, 2026 NA
Tender For auction sale of others - condemned civil structure of abandoned 1] bl- 14[oh] , unit-12, location- bwn, 2] pump house for pump no 13, unit-1, location- bwn, and 3] bl- 107 , unit-10, location- traffic colony, bwn, total - 23 unit, total qty- 01 by lot. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.

CTN :44481054 Due date: 20 Mar, 202620 Mar, 2026 NA
Tender For auction sale of others - condemned civil structure of abandoned 1] qtr no 12 , unit-13, location- mug and 2] qtr no 3 , unit-4, location- bcgm, total - 17 units , total qty- 01 by lot. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.

CTN :44481055 Due date: 20 Mar, 202620 Mar, 2026 NA
Tender For auction sale of others - condemned civil structure of abandoned 1] qtr no 2 , unit-6, location- nmf and 2] qtr no 9 , unit-1, location- rslr, total - 7 units , total qty- 01 by lot. above mentioned condemned structure are offered excluding common wall of adjacent another unit and boundary wall if any which has not been offered or sold . therefore such type of cases should be dealt with proper care during dismantling so that adjacent unoffered and unsold unit are not damage or broken in any way.condition-1] before bidding purchaser are invariably advised to see the lot and also check whether any unit of the offered lot is occupied in any way. if found occupied , in that case it is required to be brought to the notice of the custodian as well as to this office [ i.e. sr.dmm/hwh ] in writting at least 24 hours prior to the start of auction for taking further necessary action. 2] no complaints/claim by the purchaser will be entertained in this regard after e auction sale is completed. 3] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 4] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 5] purchaser should ensure to keep a safety banner around the work spot. 6] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 7] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 8] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 9] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.10] no explosives can be used for demolishing, 11] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use.

CTN :44481056 Due date: 20 Mar, 202620 Mar, 2026 NA
Tender For auction sale of others - condemned structure of abandoned chimney, qty-05 units, total qty- 01 by lot. condition-1] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 2] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 3] purchaser should ensure to keep a safety banner around the work spot. 4] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 5] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 6] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 7] purchaser shall ensure that dismantling work does not affect or endanger safety of life and property in near vicinity.8] no explosives can be used for demolishing, 9] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use, 10] materials will be sold on "as is where is" basis.

CTN :44452258 Due date: 28 Mar, 202628 Mar, 2026 NA
Tender For supply of relaya cut out relays reversecurrentcovercurrentd under voltage , insulators including hardware fitting , tower ladder on type wheels , portable extension ladder , trowel , miniature circuit breaker mcb , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth plate , earth electrode , mccb , elcb and rccb , capacitors , various electronic components , various lamps with fittings , all types of cfl lamp led sets , cables twisted pair non metallic sheathed cable underground feeder cable ribbon cable metallic sheathed cable , cable jointing kit , bus bar with brackets , electrician helmet , safety belt with provision forkeeping tools , panel accessories , wiring accessories including modular industrial switchgears , solar street light , solar traffic light , solar dc pump , rechargeable battery , led lights , solar panels , solar charge controller with manual switch day lighting , ev charger , ev charger home , motion detector , dc power supply , automatic reverse forward starter , single phasing preventer , dol starter , soft starter , lead acid battery 75ah , battery charger , solar street light lamp set , field regulator , transformer single phase , dc compound motor , dc shunt motor , dc series motor , mg set consisting of squirrel cage induction motor 5 hp 400 v cycle with directly coupled compound generator 3 kw 250 v , cctv camera kit , personal computer system with printer , lcd led projector , domestic appliances , a electric induction plate , b electric kettle , electric iron , d immersion heater , e ac ceiling fan and actable fan , f geyser storage type , g mixture grinder , h washing machine semi automatic , i motor pump set , j refrigerator , control panel , working bench , demonstration table , instructors chair , computer chair revolving , metal rack , almirah , fire extinguiser co2 , dual desk , computer table , revolving chair for computer , computer latest model , printer table , book case , ups , lcd projector , antivirus , steel almirah , multi feature photocopier , application software ms office education version , laser printer

CTN :44010690 Due date: 20 Mar, 202620 Mar, 2026 19.18 Lacs
Tender For corrigendum : tender for supply of air filter assembly , cylinder head dia 127 , valve flat dia 70 , fan holer with blades assembly , plug i l valve , gasket dia 60 cylinder to valve flat , packing valve flat to dia 60 cyl head , piston assy dia 60 ts , rubber beading , obs piston rings dia 70 , obs del ul valve 3 4 bsp , piston rings set dia 100 , ring set 50 dia , auto drain valve , cylindrical roller bearing , filter assy i l air b type , lamellar valve 1st stage , valve assy drain 1 4 bsp , valve assy brea , safety valve assy 3 4 bsp 11 to 12 ksl , lamellar valve , pressure gauge 0 12 kg cm 1 4 gluck make , duv assy 3 4 bs , valve assy dis hv sp , spring safety valve 2nd stage , disc valve 127 dia suction valve plate , piston 127 dia , cylinderical roller bearing , kit gasket sp 10 12 15 20 , lamellar valve , slotted oil control ring i set 3 nos , con rod c shaft assy sp 10 20 , pressure switch , pressure gauge 0 25 kg cm 3 8 bsp gluck make , inlet valve plug , plug del valve m c hv sp rly , valve plate dia 60 cylinder , gasket 0point75 c case to cyl ts 02 , gasket 0point25c case to cyl ts05 , gasket 0point4 c case to cyl tso5 , gasket val flat to 60 head 0point75 , piston assy 100 ss ts 07 , piston assy dia60 ts , discharge valve 3rd stage , inlet valve 2nd stage , discharge valve 2nd stage , reed valve set 1st stage , safety valve 300 bar , o ring of liner 3rd stage , piston 1st stage complete , d v assy dia , valve assy drain 1 4 bsp , auto drain valve , akcc 60 60 rfpl avm , psw assy 8 32 bar , 1 bd 3 8 bsp 60100 lfgimcpg , disc valve 127 dia delivery valve plate , cone valve ul psw , spring ul psw , shaft seal , o ring , r ring , obs discharge valve assy , washer rubber , cylinderical roller bearing

CTN :44248921 Due date: 14 Mar, 202614 Mar, 2026 5.00 Lacs
Tender For bid to ras supply of frame , brushless motors , 13 inch propeller set tri blade , flight controller , esc , fpv camera , gps module with compass , li ion battery pack , optical fiber spool 5 km length , optical fiber air , ground unit , express lrs dual band receiver , fpv goggles , radio controller , spare li ion cells , hard case , safety mechanism and detonation , payload holder , allied accessories
 Loading, Please wait...

Connect us via What's Up