Tender For repairs of chajja or beam or damped wall of d-5 and c-5 ty iii qtrs and waterproofingtreatment of f block ty-ii half portion of c-block ty-iii qtr including internal painting of f3 ty ii qtr at arttc campus ranchi
Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c
Tender For providing and applying waterproofingtreatment on the roof slab of first floor of art and craft centre at nagrota (rajiana), distt. kangra (hp)
Tender For change of damaged sheets and repair & maintenance of the roof shed (gi profile sheet) of various public building in colony at 2x500mw, abvtps cspgcl janjgir-champa.
Tender For procurement of cat b stores - wire brush 8" x 3", coir brush size 8" x 3" wood base consisting of 3 long coir strands placed in brush arranged in 8 column and 4 rows, mason thread, ms wire nails, size: 1/1.5", as per 15-723, specification rust free, ms wire nails, size: 2/2.5", as per is-723, specification rust free, ms wire nails, size: 3", as per is-723, specification rust free, ms wire nails, size: 4", as per is-723-specification rust free, ms wire nails, size. 5", as per is-723 specification rust free, ms wire nails, size: 6", as per is-723 specification rust free, pbs roll 1mtr width x 1mm thick x 20 mtz roll, make: superior quality, rope manila 20mm dia, rope manila, 30mm dia, rope manila, 40mm dia, bow handle 6", bow handle 4, glass pane 6'x3x4mm,, make: saint govain/si certification marked, glass pane 6'x4'x5mm,, make: saint govain/si certification marked, glass pane 2 x 1 x 3mm, make: saint govain/is! certification marked, frosted glass panes 30 cmx30cmx4mm, frosted pin headed glass sheet 4mm 91 x 1 mir, glass putty, make: jk/birla, pvc mosquito proofing mesh 15 mir roll, wire mesh 3mm roll of 15mir, wire mesh 6mm roll of 15mir, wire mesh 10mm roll of 15m, wire mesh 12mm roll of 15m, wire mesh 20mm roll of 15m (welded mesh), hessian cloth 54" width, hinges 4", with screw, make:bita/golden/girson/diamond/isi, hinges 2" with screw, make bita/golden/girson/diamond/isi, hinges 3" with screw, make bita/golden/girson/diamond/isi, ms bolt hinges/ butt hinges (100mm long), ms bolt hinges/ butt hinges (75mm long), m seal 100gm, ms screw size: 20mm (3/4") (100 nos/pkt), ms screw, size: 25mm (1") (100 nos/pkt), ms screw, size: 50mm (2") (100 nos/pkt), ms screw, size: 75mm (2") (100 nos/pkt), ms screw, size: 100mm (4") (100 nos/pkt), green cloth, curtain ring, wall putty (20 kgs pack), make: jk/berger, weather coat exterior primer 20 ltr drum, sunmica top wooden finish, size: ext, sliding ball with screw size: 10inch, sliding bolt with screw size: 8inch, sliding bolt with screw size 12inch, door stopper, size: 140mm, item discription: aluminium alloy body and toungh, anodised with hard drawn steel spring fixed in floor, tower bolt size: 8, tower bolt size: 6, brass tower bolt barrel type 150mm, brass lower bolt barrel type 100mm, door window handle 100mm, door window handle 150mm, hydraulic door closer make: godrej, sand paper 80no, sand paper 120no, sand paper 60no, wood primer make: shalimar, varnish 1 lir pack make: asian/pidilite berger, looking mirror 450x800mm, make gold plus/saint gobin/modiguard, while cement (1kg pkt) make jk/birla, floor tiles 1'x1'x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, floor tiles 2 x2 x 10/12mm (ceramic/vitrified), make somany/jhonson/kajaria/nitco/orient, wall tiles 8" x 12' make, somany/jhonson/kajaria/nitco/orient, wall tiles 1' x 1' cerarnic/vitrified), make somany/jhonson/kajaria/orient, pvc false ceiling panels,, colour : white, size: 10x10 long 6-8mm thick, with gi channel and concealed fixing arrangement to roof truss and top side of panels all fitment complete., make: sarah/raunaq/equivalent, drill bit 20mm, drill bit 18mm., drill bit 12mm, drill bit 5mm, plastic rope size: 10mm, gi wire 4mm, cornfirming to is-280: 2006, gypsum screw size 1 (100 nos/pkt) pvc door (out to out size 0.85 x 1.90 mtr), frame 50 x 47 mm made out of 5 mm plan colour pvc sheet reinforce with ms square tube incl pvc shuller 30 mm thickconssting of frame made out of ms tube for top and bottom rail with pvc sheet strip 20 mm width suitable pvc steel bedding complete indis 100 mm ss hinge-30 nos a/u handle 125 mm-02 nos a/u tower bolt 150 mm -02 nos, stainless steel hasp and staple 100mm, door stopper (brass/ordinary type), magnate catch, (make:, amar/mahamaya/crown), gas sparker (gas lighter), gas pipe (lpg), hinges 1" width 3" length, stainless steel curtain rod 20mm dia 1.5mtr length, stainless steel bracket (for 20mm dia curtain rod), stainless steel nobe (for dia curtain 20mm dia),
Tender For change of damaged sheets and repair & maintenance of the roof shed (gi profile sheet) of various public building in colony at 2x500mw, abvtps cspgcl janjgir-champa.
Tender For repair to spalling micro concrete, internal/external cracks for remedial plaster work, joinery, modular kitchen and other b/r works and repair/maint of lift rooms various high rised building and repair to gi roof sheet at ncc officers mess at colaba
Tender For preparation for the winter session of 2025, repair of the new/old circuit house/inspection bungalow in belgaum, providing flooring for the new circuit house, providing sewer line for the annex building. painting in selected parts of the rooms of the new/old circuit houses, installing g.i. sheet roof to the generator room, installing pavers in the t.c. area of circuit house premises of belagavi taluk under hoa-2059 dept buildings for 2025-26.