Latest weighbridge machine scrap Tenders | Government weighbridge machine scrap Tenders

CTN :43208572

22 Dec, 2025 NA

Sahibganj - Jharkhand

Tender For e-quotations are invited for ascertaining rate of items for preparing estimate of construction of jsfc godown 1000 mt, udhwa. - design, supply, fabrication, transportation, and installation of truss-less self-supported arch roofing system over the specified warehouse structure. all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price.________________________________________1. site details: project type: warehouse roofing span (clear): 21.80 meters arch rise: 3.00 meters (span/5) length of shed: 46.50 meters no. of bays: 1 eave height: 5.60 meters (approx.)________________________________________2. roofing system requirements: type: truss-less (self-supported arch type) roofing system design: to be structurally stable without any intermediate truss or support, suitable for clear span of 21.80 meters and arch rise of 3.00 meters roof coverage area: approx. 1,013.7 sq.m (21.80 m 46.50 m)________________________________________3. material specifications: sheet material: color coated colorbond zincalume steel coating type: az150 (al-zn alloy coating, 150 g/m total on both sides) standard compliance: astm a 792 base metal thickness (bmt): 1.10 mm total coated thickness (tct): 1.075 mm width of coil: 912 mm to 1010 mm tolerance: 2 mm________________________________________4. additional requirements: installation: complete laying and fixing of roofing with overlaps and arching to specified dimensions using hydraulically operated mobile forming machinery. fasteners: high tensile, corrosion-resistant self-drilling screws with epdm washers to be used as per manufacturer recommendations. sealants/consumables: all sealants, fasteners, insulation pads, edge closures, etc., required to ensure weather-tight performance shall be included. workmanship: roofing system shall be free from dents, scratches, warping. finish should be smooth and uniform in color. drainage/gutters: (specify if required)________________________________________5. design & load considerations: wind load: as per is 875 part 3 (latest revision) live load & dead load: as per is 875 part 2 seismic consideration: as applicable per is 1893 deflection limits: as per is 800________________________________________6. quality control & inspection: all material to be accompanied by manufacturers test certificates. the roofing system shall be inspected and approved before and after installation by the engineer-in-charge.________________________________________7. warranty: minimum 10 years warranty on material for corrosion resistance and color stability., supplying & installation of single turbo ventilators 2300 cfm, size 24", aluminum construction with skylight of 2mm thick size 2 x 07 ft. - with complete fixing accessories, supplying & installation of hangers / clamps (for light hanging purpose).all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price., supply, installation, testing & commissioning of weighbridge. platform size 12.0 x 3.0 meter max. capacity 60 mt. type of platform fully welded modular type weighbridge main u-beam 300 mm x 140 mm - u beam (e 350 grade h t plate) cross support 16 mm thick plate between two main long beam top plate 8 mm top plate with anti-skid strips foundation frame 100 mm x 50 mm long frame with fully welded 350 mm x 350 mm x 16 mm plane plate border frame 100 mm x 50 mm - both side heavy duty frame with side wall mounting load cells ms plates 150 mm x 150 mm x 16 mm - load cell top & bottom plate joint & assembly main beam, cross support & top plate completely welded to each other. guide rail round pipe based side frame - 100 mm - both side fasteners as per required & is standard paint 2 coat of ant-corrosive primer and 2 coat enamel paint material all material will be is 2062 standard material list weighbridge platform structure- - 01 no. u-beam type modular orthotropic all material will be is 2062

CTN :43208573

22 Dec, 2025 NA

Sahibganj - Jharkhand

Tender For e-quotations are invited for ascertaining rate of items for preparing estimate of construction of weigh bridge and operator room, barhait - supply, installation, testing & commissioning of weighbridge. platform size 12.0 x 3.0 meter max. capacity 60 mt. type of platform fully welded modular type weighbridge main u-beam 300 mm x 140 mm - u beam (e 350 grade h t plate) cross support 16 mm thick plate between two main long beam top plate 8 mm top plate with anti-skid strips foundation frame 100 mm x 50 mm long frame with fully welded 350 mm x 350 mm x 16 mm plane plate border frame 100 mm x 50 mm - both side heavy duty frame with side wall mounting load cells ms plates 150 mm x 150 mm x 16 mm - load cell top & bottom plate joint & assembly main beam, cross support & top plate completely welded to each other. guide rail round pipe based side frame - 100 mm - both side fasteners as per required & is standard paint 2 coat of ant-corrosive primer and 2 coat enamel paint material all material will be is 2062 standard material list weighbridge platform structure- - 01 no. u-beam type modular orthotropic all material will be is 2062 grade painting : 2 coat primer with enamel paint all standard joint assembly, nut & bolts, foundation plates etc . european design u beam orthotropic design. virgin material branded moc value engineering modular design. heavy-duty load cell -06 nos. eagle multi ended share beam type load cell-34.5t each... pre-calibrated digital technology (no need to make calibrate scale) digital signal for long distance. special diagnostic feature unique data string, can not be copy or replace. in built lighting protection. inbuilt filters for noise reduction. load cell mounting assembly with inbuilt lightning & surge protection. suitable for sending signal over long distance. electronics digitizer (smart intelligent terminal system) -01 no. no need to use computer system for our smart terminal direct connect dot-matrix / laser* printer full graphical lcd display (130 x 40 mm). three step software calibration & smart calibration to correct small errors & accurate readings. inbuilt 200000 ~ 250000 memories storage facility. usb port for data entry and back up. usb interface facility for data backup in external memory stick (pen drive). vehicle vise data entry and report printing multi level password for security - dynamic (otp system) & regular password facility. all date entry show in single window external smps power supply for load cell & other system safety. auto sms facility. optional facility to send sms & email weighment records. junction box (summation box) -01 no. high protection junction box with gd tubes & built in surge & lightning protection water proof cable pg-9 gland (ip67 protected) external metal box with locking facility for extra load cell cable & junction box - 01 no. usb key board for weighment data entry - 01 no. ups with battery - 01 no. pc system - 01 no. laser printer - 01 no. ci test weight - 01 ton. jumbo display 50 mm - 01 no. e soft -weighbridge management software - 01 no. load cell cable (shielded) -junction box to digitizer 100 meter accessories (cable, connectors & data signal cable etc .) - 01 set. flexible conduct pipe 1 meter for each load cell (rat protection) power cable for digitizer rs 232 interfacing cable - 2 meter (communication with pc), add 18 % gst, add 1% labour cess

CTN :43208574

22 Dec, 2025 NA

Sahibganj - Jharkhand

Tender For e-quotations are invited for ascertaining rate of items for preparing estimate of construction of weigh bridge and operator room, sahebganj - supply, installation, testing & commissioning of weighbridge. platform size 12.0 x 3.0 meter max. capacity 60 mt. type of platform fully welded modular type weighbridge main u-beam 300 mm x 140 mm - u beam (e 350 grade h t plate) cross support 16 mm thick plate between two main long beam top plate 8 mm top plate with anti-skid strips foundation frame 100 mm x 50 mm long frame with fully welded 350 mm x 350 mm x 16 mm plane plate border frame 100 mm x 50 mm - both side heavy duty frame with side wall mounting load cells ms plates 150 mm x 150 mm x 16 mm - load cell top & bottom plate joint & assembly main beam, cross support & top plate completely welded to each other. guide rail round pipe based side frame - 100 mm - both side fasteners as per required & is standard paint 2 coat of ant-corrosive primer and 2 coat enamel paint material all material will be is 2062 standard material list weighbridge platform structure- - 01 no. u-beam type modular orthotropic all material will be is 2062 grade painting : 2 coat primer with enamel paint all standard joint assembly, nut & bolts, foundation plates etc . european design u beam orthotropic design. virgin material branded moc value engineering modular design. heavy-duty load cell -06 nos. eagle multi ended share beam type load cell-34.5t each... pre-calibrated digital technology (no need to make calibrate scale) digital signal for long distance. special diagnostic feature unique data string, can not be copy or replace. in built lighting protection. inbuilt filters for noise reduction. load cell mounting assembly with inbuilt lightning & surge protection. suitable for sending signal over long distance. electronics digitizer (smart intelligent terminal system) -01 no. no need to use computer system for our smart terminal direct connect dot-matrix / laser* printer full graphical lcd display (130 x 40 mm). three step software calibration & smart calibration to correct small errors & accurate readings. inbuilt 200000 ~ 250000 memories storage facility. usb port for data entry and back up. usb interface facility for data backup in external memory stick (pen drive). vehicle vise data entry and report printing multi level password for security - dynamic (otp system) & regular password facility. all date entry show in single window external smps power supply for load cell & other system safety. auto sms facility. optional facility to send sms & email weighment records. junction box (summation box) -01 no. high protection junction box with gd tubes & built in surge & lightning protection water proof cable pg-9 gland (ip67 protected) external metal box with locking facility for extra load cell cable & junction box - 01 no. usb key board for weighment data entry - 01 no. ups with battery - 01 no. pc system - 01 no. laser printer - 01 no. ci test weight - 01 ton. jumbo display 50 mm - 01 no. e soft -weighbridge management software - 01 no. load cell cable (shielded) -junction box to digitizer 100 meter accessories (cable, connectors & data signal cable etc .) - 01 set. flexible conduct pipe 1 meter for each load cell (rat protection) power cable for digitizer rs 232 interfacing cable - 2 meter (communication with pc), add 18 % gst, add 1% labour cess

CTN :43208575

22 Dec, 2025 NA

Sahibganj - Jharkhand

Tender For e-quotations are invited for ascertaining rate of items for preparing estimate of construction of jsfc godown 1000 mt, mandro - design, supply, fabrication, transportation, and installation of truss-less self-supported arch roofing system over the specified warehouse structure. all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price.________________________________________1. site details: project type: warehouse roofing span (clear): 21.80 meters arch rise: 3.00 meters (span/5) length of shed: 46.50 meters no. of bays: 1 eave height: 5.60 meters (approx.)________________________________________2. roofing system requirements: type: truss-less (self-supported arch type) roofing system design: to be structurally stable without any intermediate truss or support, suitable for clear span of 21.80 meters and arch rise of 3.00 meters roof coverage area: approx. 1,013.7 sq.m (21.80 m 46.50 m)________________________________________3. material specifications: sheet material: color coated colorbond zincalume steel coating type: az150 (al-zn alloy coating, 150 g/m total on both sides) standard compliance: astm a 792 base metal thickness (bmt): 1.10 mm total coated thickness (tct): 1.075 mm width of coil: 912 mm to 1010 mm tolerance: 2 mm________________________________________4. additional requirements: installation: complete laying and fixing of roofing with overlaps and arching to specified dimensions using hydraulically operated mobile forming machinery. fasteners: high tensile, corrosion-resistant self-drilling screws with epdm washers to be used as per manufacturer recommendations. sealants/consumables: all sealants, fasteners, insulation pads, edge closures, etc., required to ensure weather-tight performance shall be included. workmanship: roofing system shall be free from dents, scratches, warping. finish should be smooth and uniform in color. drainage/gutters: (specify if required)________________________________________5. design & load considerations: wind load: as per is 875 part 3 (latest revision) live load & dead load: as per is 875 part 2 seismic consideration: as applicable per is 1893 deflection limits: as per is 800________________________________________6. quality control & inspection: all material to be accompanied by manufacturers test certificates. the roofing system shall be inspected and approved before and after installation by the engineer-in-charge.________________________________________7. warranty: minimum 10 years warranty on material for corrosion resistance and color stability., supplying & installation of single turbo ventilators 2300 cfm, size 24", aluminum construction with skylight of 2mm thick size 2 x 07 ft. - with complete fixing accessories, supplying & installation of hangers / clamps (for light hanging purpose).all materials, consumables, labor, tools, machinery, and incidental items shall be included in the quoted price., supply, installation, testing & commissioning of weighbridge. platform size 12.0 x 3.0 meter max. capacity 60 mt. type of platform fully welded modular type weighbridge main u-beam 300 mm x 140 mm - u beam (e 350 grade h t plate) cross support 16 mm thick plate between two main long beam top plate 8 mm top plate with anti-skid strips foundation frame 100 mm x 50 mm long frame with fully welded 350 mm x 350 mm x 16 mm plane plate border frame 100 mm x 50 mm - both side heavy duty frame with side wall mounting load cells ms plates 150 mm x 150 mm x 16 mm - load cell top & bottom plate joint & assembly main beam, cross support & top plate completely welded to each other. guide rail round pipe based side frame - 100 mm - both side fasteners as per required & is standard paint 2 coat of ant-corrosive primer and 2 coat enamel paint material all material will be is 2062 standard material list weighbridge platform structure- - 01 no. u-beam type modular orthotropic all material will be is 2062

CTN :43159673

22 Dec, 2025 5.22 Lacs

Hazaribag - Jharkhand

Tender For repairing/revival and rearrangement of racks, ofc, cat-6 cable, lan points and dismantling of old rfid based boom-barrier system installed at weighbridge and various location under hazaribagh area.

Central Government/Public Sector

CTN :43170013

23 Dec, 2025 NA

Jhunjhunu - Rajasthan

Tender For supply of supply, installation and commissioning of the erawana weighbridge automation system (096600111)

Central Government/Public Sector

CTN :43100866

29 Dec, 2025 NA

Jharsuguda - Odisha

Tender For supply of portable wheel wise load measurement system rail weighbridge

State Government

CTN :42971907

19 Dec, 2025 14.84 Lacs

Raichur - Karnataka

Tender For a)scope of work covers supply, installation and commissioning of iot data logger with control panel for integration of bulker/railway silo weigh bridges of rtps-units-1 to 8 weighment data to kpcl ash management system(ams). b) materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. c) the installation and commissioning of all the supplied materials and ensuring satisfactory performance of the commissioned system at rtps site shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment & works specified and covered under the specifications.d.handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself.e.all required consumables, hardware and software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the supply, installation and commissioning of iot data logger with control panel for integration of bulker/railway silo weigh bridges of rtps-units-1 to 8, weighment data to kpcl ash management system(ams) are under the contractor/agency itself f. all the materials required for the installation and commissioning of supply, installation and commissioning of iot data logger with control panel for integration of bulker/railway silo weigh bridges of rtps-units-1 to 8, weighment data to kpcl ash management system(ams) shall be made as detailed under the technical specifications. g. upkeeping of weighbridge weighment data of rtps-units -1 to 8 with kpcl ams, including two years of cloud server and network sim maintenance and with one year warranty on iot data logger panel.h. providing as built drawings, operation & maintenance/instruction manuals and other information shall be provided before handing over of the systems and equipment.

Weighbridge Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government