Latest welding equipment sale Tenders | Government welding equipment sale Tenders

Central Government/Public Sector

CTN :40266790

29 May, 2025 NA

Hyderabad-T - Telangana

Tender For supply of babbit relining of existing bearing as per drawing, babbit lining material: gr 75, is25-66 , manufacturing of item sl. no. 2 as per drawing and removal of rod and welding and relining

corporations/Associations/Others

CTN :40205542

13 May, 2025 13.00 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : supply of material 500 bedded medical college jhansi - supply of material, steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes., providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. fixed to steel windows by welding., providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m .

corporations/Associations/Others

CTN :40240884

19 May, 2025 20.00 Lacs

Gandhidham - Gujarat

Tender For annual rate contract form aking fabrication/welding material of variousdepartments atgandhidham municipalcorporation area,gandhidham.

CTN :40293453

19 May, 2025 NA

Kharagpur - West Bengal

Tender For supply of rubber hose for oxy-acetylene welding and cutting with braided textile re-inforcement in red colour ; size: 8 mm x 7.5 mtrs. in length, isi marked. drawing no. -- material and specification -- is : 447 / '88 (4th. rev.) with amendment no. 1 of may 2002. [ warranty period: 30 months after the da te of delivery ]

CTN :40261234

27 May, 2025 NA

Sihor - Gujarat

Tender For rate contract for water supply fitting material , valve and fitting material , welding work , jcb/tractor hiring , building material , sound system hiring , printing work , photography and videography , banner , died animal disposal , animal catching , water tanker , tent service , etc.

CTN :40252500

22 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of pipes fittings and flanges - 2072101001 group 1 pipe carbon steel seamless astm a333 grade6 bevel end size 3/4 inch 160 pipe schedule , 4110230581 group 1 pipe carbon steel seamless astm a333 grade6 bevel end size 1 inch 80 pipe schedule , 2072109111 group 1 pipe carbon steel seamless astm a333 grade6 bevel end size 1.5 inch 80 pipe schedule , 2072109121 group 1 pipe carbon steel seamless astm a333 grade6 bevel end size 2 inch 80 pipeschedule , 2072101011 group 1 pipe carbon steel seamless astm a333 grade6 bevel end size 4 inch 40 pipe schedule , 4898809651 group 3 flange socket weld size 3/4 inch astm a350 rated 150 class connecting pipe schedule 160. finish shall be rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4526622351 group 3 weld neck (butt weld) raised face flange size 3/4 inch astm a 350 grade lf2 class 600 with connecting pipe schedule 160 finish shall be bw end / rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4522200101 group 3 blind flange raised face size 3/4 inch class 150 material conforming to astm a 350 gr lf2. finish shall be rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4522180951 group 3 blind flange raised face size 3 4 inch class 300 material conforming to astm a 350 gr lf2 finish shall be rf 125 250 aarh and dimension standard shall conform to b 16 5 , 4898809661 group 3 blind flange raised face size 3/4 inch class 600 material conforming to astm a 350 gr lf2. finish shall be rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4898809651 group 3 flange socket weld raised face size 3/4 inch class 300 with schedule 80 conforming to astm a 350 lf2 connecting pipe schedule 160 finish shall be rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4346180501 group 2 elbow 90 deg long radius size 3 4 inch ltcs a 420 grade wpl6 schedule 160 butt weld end dimension standard asme b 16 9 , 4347451181 group 2 elbow 90 deg short radius size 3/4 inch ltcs astm a 350 grade lf2 socket weld end pressure rating 6000 dimension standard b 16.11 , 4388031441 group 2 equal tee , 3/4 inch size , ltcs - astm a 420 grade wpl6 , schedule 160 , butt weld end , dimension standard- asme b 16.9 , 4388831061 group 2 equal tee , 3/4 inch size , ltcs - astm a350 grade lf2 , socket weld end pressure rating 6000 dimension standard b 16.11 , 4529437501 group 3 welding neck ring type joint flange size 3/4 inch class 1500 with schedule 160 astm a350 grade lf2 connecting pipe schedule 160 bw end / wnrtj-63 aarh dimension standard b 16.5 , 4529179651 group 3 1 wnrf material astm a 350 gr lf2 butt weld end pipe schedule 80 flange 150 finish rf 125 250 aarh dimension standard b 16 5 , 4346230621 group 2 elbow 90 degree long radius size 1 in ltcs astm a 420 grade wpl6 schedule 80 butt weld ends. dimension shall conform to b 16.9 standard. , 4388240621 group 2 equal tee size 1 in ltcs astm a 420 grade wpl6 schedule 80 butt weld ends. dimension shall conform to b 16.9 standard. , 4529302551 group 3 2 wnrf flange class 300 astm a350 grade lf2 end connection butt weld schedule xs and finish shall be rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4527451031 group 3 2 300 spectacle blind flat faced astm a350 grade lf2 and finish shall be ff-125-250 aarh and dimension standard shall conform to b 16.48 , 4529304611 group 3 2 wnrf flange class 600 astm a350 grade lf2 end connection butt weld schedule xs and finish shall be rf-125-250 aarh and dimension standard shall conform to b 16.5 , 4527461881 group 3 2 600 spectacle blind flat faced astm a350 grade lf2 and finish shall be ff-125-250 aarh and dimension standard shall conform to b 16.48 , 4315121511 group 2 sockolet size 2 x 1 in pressure rating 3000 material ltcs astm a 350 grade lf2. dimension shall conform to mss sp 97 standard. , 4315129041 group 2 sockolet size 2 x 3/4 in pressure rating 6000 material ltcs astm a 350 grade lf2. dimension shall conform to mss sp 97 standard. , 4389

CTN :40241120

28 May, 2025 NA

Hooghly - West Bengal

Tender For supply of specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 1016 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 4 x 2550 sqmm , m and l for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size3.5 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete disconnecting of earthing cable , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 30.00 and 31.00 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc. , single core stranded copper conductor frls of size 16 sqmm including copper lugs at both ends , single core stranded copper conductor frls of size 10 sqmm including copper lugs at both ends , aluminium busbars electrolytic grade of as per site required amps and ka rating bus bars with ryb and black colour coding including drilling cutting , s and f of framed work as in doors or gates of angle or other section with gusset plates rails braces etc. complete drilled for fixing of steel sheeting or other covering. doors etc. , m and l for cross arms bracings supports clamps and back plates fabricated from structural steel sections includings nuts bolts washers welding , m and l for cement concrete 136 type c2 using 40mm graded crushed stone aggregate as in pole foundation filling and mass concrete complete all as specified , m and l for cement concrete 124 type b1 using 20mm graded crushed stone aggregate as in coping of pole including weathering slightly rounded , m l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build , m and l for 15mm thick in cm 14 rendering on brick or concrete surfaces finished fair and even on wall complete all as specified and directed. , m and l for hardcore of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface as specified and directed. , m and bid details/ 2 / 38 l ss pasivated screw bolts machine made with hexagonal head at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal nut diameter , m and l for preparation of existing surface of lt panel by srapping down peeled off old paint cleaning etc and applying two coat of siemens

corporations/Associations/Others

CTN :39916722

10 May, 2025 NA

Parichha - Uttar Pradesh

Tender For corrigendum : erection, commissioning and testing of complete lt pmcc along with supply of all required material in compressor house for providing supply to welding receptacles, dewatering pump and other utility supply of 2x250 mw, ctps, parichha (jhansi).

Central Government/Public Sector

CTN :40241893

10 Jun, 2025 NA

Kothagudem - Telangana

Tender For supply of c.c bricks size 10x8x6 inch , 10mm stone aggregates , 20mm stone aggregates , 40mm stone aggregates , coarse sand , fine sand , moorum filling material , cement , paint primer , distemper paint , acrylic smooth exterior paint , rollar brush , 100mm brush , tmt bar 12 mm 700 kg 10 mm 50kg and 8 mm160 kg , binding wire , vitrified tiles floor , wall tiles , synthetic enamel paint , rectangular hallow section pipe 50x25x2.5 , gi plan sheet , precoated galvanised iron sheet , self screw 1.5 inch , welding rod , 4 inch cutting blade , pvc waste pipe , upvc connection pipe , cp brass bib cock , wash basin , cp brass angle valve , indian commode with flushing cistern , toilet bath door with accessories , looking mirror 300x450 mm , 20 mm dia cpvc pipe , 40 mm dia cpvc pipe , 63 mm diameter pvc pipe , 100 mm diameter pvc pipe , cp towel rail , ptmt gritting , hexa blade , teflon tape , solvent cpvc 100 ml , 40 mm cpvc ball valve , 40mm tank nipple ptmt , ptmt bib cock long body , ptmt pillar tap , mtmt angle cock , cpvc reducer tee 20x15mm , cpvc union 20 mm , cpvc union 40 mm , cpvc elbow 100 mm , pvc tee 100 mm , 1.5 sqmm single core wire , 2.5 sqmm single core wire , 6 amp switch , 6 amp socket 5 pin , 16 amp switch , 16 amp socket , 16 amp single pole mcb , 25 mm casing caping , 25 mm casing caping clip , insulation tap , construction, plumbing, electrification and other work labour charge

Central Government/Public Sector

CTN :40256507

15 May, 2025 NA

Krishnarajapuram - Karnataka

Tender For master air pressure (dial type) gauge direct mounting with 1/2" bsp bottom con nection having dial size of 250mm for pressure range 0-16 kg/cm2 with least count of 0.05kg /cm2. material of gague: alluminum cast, with micro adjustment knife edge pointer and bour dan tube made of ss316/ss304 and joints made of argon arc welding. calibration certificate traceble to nabl to accompany with supply. makes: ravika instruments or similar [ warranty period: 12 months after the date of delivery ]

Welding Equipment Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector