Latest welding portion Tenders | Government welding portion Tenders

Central Government/Public Sector

CTN :40289487

11 Jun, 2025 NA

Bangalore - Karnataka

Tender For sr. den/north/sbc and den/south/sbc sec: manufacturing, supply and execution of 60kg and 52kg at welding portions including in-situ welding pertaining to sr. den/north/sbc section and den/south/sbc section.

CTN :40288540

22 May, 2025 NA

Ratnagiri - Maharashtra

Tender For supply of procurement of skv welding portion for 52 kg 90 uts rail & prefabricated 3 pieces mould.

CTN :40005571

08 May, 2025 NA

Vapi - Gujarat

Tender For corrigendum : supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki -

State Government

CTN :40172847

14 May, 2025 NA

Mandla - Madhya Pradesh

Tender For building materials and stores for purchase of perishable materials and other -group 1 building materials etc. a cement ppt 53 grade a, sintered brick, sand narmada river / mahanadi, stone dust, bhasua sand (12 mm), granite (20 mm), granite (40 mm), brick laying machinery (9 x 9 cm), kota stone (25 mm), granite stone, top quality materials etc. have been used in construction work in the field of cement, tin, stone aggregate, gravel (600 x 600 mm) 9.10 mm, top quality materials etc. have been used in construction work in the field of cement, tin, stone aggregate ... those who want to buy these cars will have to face less than one hour of heavy workload; the price of which is 600x600 mm, will be increased to 9.10 mm. in this case, the equipment at the same time will be used to provide relief in the loss of life; the price of which is 300x300 mm, will be used to provide relief in the loss of life; the price of which is 300x300 mm, will be used to provide relief in the loss of life. 600x600 mm after 9.10 mm) stainless steel rods (special purpose) group 2. iron bars a iron 16 mm (16 in.) (1.5 mm), iron 12 mm (16 in.) (1.5 mm), iron 10 mm (16 in.) (1.5 mm), iron 8 mm (16 in.) it is a cast iron article having g.i.l., g.i., g.i.t. group 3 steels and profiled sheets with necessary screw welding and complete fittings. 14g 3.5a pap bmtgppimk 0.50g 12g 3.5a pap bgtm 0.50g 4 ? ????? ???? 6 ? ????????????? ????? ???????? ???????? 100 ?? ???? ???? 100 ?? ????? ???? 100 ??; heat the humidifier at 1 degree celsius. heat the humidifier at 4 degree celsius. heat the humidifier at 20 degree celsius. heat the humidifier at 1 degree celsius. heat the humidifier at 4 degree celsius. heat the humidifier at 20 degree celsius. heat the humidifier at 1 degree celsius. spajmat chambapadah .epand jtambajvatae mdanumas thasnam champadajh 4 spajmat chambapadah .epand jtambjavatae mdanumas thasnam champadajh 20 spajmat chambapadah .epand jtambajvatae mdanumas latmamad champadajh 1 spajmat chambapadah .epand ?????????? ????????? ????? ?????? ???????? 4 ??????? ????????? .epand in the same way, the husband is so much in need of lime that he is the main nitrate maker (the owner of the lime) in the same way, the lime is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker, the nitrate maker is the main nitrate maker. the amount of the item in the register is mentioned in the table below: the amount of the item in the register is mentioned in the table below: 1. as per the standards set by the weights and measures department 2. as per the standards set by the weights and measures department 3. as per the standards set by the weights and measures department 4. as per the standards set by the weights and measures department 5. as per the standards set by the weights and measures department 10. as per the standards set by the weights and measures department 15. as per the standards set by the weights and measures department (x, x, y) (instructions) group 5 electrical materials a 12 developed materials 6 developed materials 6. a box 10. a box 12. a box 16. i a box 25. i and tham sanjwat, pdp 5 pdp 2 pdp 16. i and tham sanjwat 16. 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 1.5 cms cms 10 cms cms 12 cms 6 cms cms 1.5 cms 12 english 18 english 25 english 25 english 25 english 25 english 25 english 25 english 25 english 25 english 25 english jnimaspahij 18 quantities (in hindi, cold storage, sale) small aquariums 32 quantities (in hindi, cold storage, sale) small aquariums collection 50 quantities (in hindi, cold storage) small aquariums collection 100 quantities (in hindi, cold storage) 50 quantities (in hindi, cold storage) 50 quantities (in hindi, cold storage) 60 quantities (in hindi, cold storage) , group 6 sanitary materials a-tube 500 gms, 1 gms 3/4 gms 1 gms 2 gms

CTN :40211507

23 May, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of machinery and equipment - portable car washer machine veh , 400 psi cwdc pump with 3 hp 1 phase cg motor , welding machine 275 ampr portable , air compessor 2hp double fitted with 250 ltr tank , hand drill gsb 20 , 375 ampr 1,2,3 phase welding set , vacum cleaner gas 12 25l

Central Government / Public Sector

CTN :40199279

12 May, 2025 NA

Multi City - Multi State

Tender For moulds shoes, these moulds shoes are to be suitable for itc supplied dry moulds & itc s upplied welding portions of 52kg rails. make: itc or equivalent. note: (1) sample is to be approved by c onsignee before bulk supply. (2) the item suitable for itc manufactured 52kg welding portion. (3) firm must have to supply purchase proof from oem/its authorised dealer and oems warranty certificate alon g with supply. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40199521

14 May, 2025 NA

Multi City - Multi State

Tender For dry moulds 3 piece, these dry moulds are to be suitable for itc supplied welding portions of 52kg rails. make: itc or equivalent. note: (1) sample is to be approved by consignee before bulk sup ply. (2) the item suitable for itc manufactured 52kg welding portion. (3) firm must have to supply purc hase proof from oem/its authorised dealer and oems warranty certificate along with supply. [ warrant y period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39884664

09 Jun, 2025 NA

Multi City - Multi State

Tender For corrigendum : running contract of one year for supply of welding portions for fusion welding of rails by alumino thermic process for 52kg (90 uts)

Central Government / Public Sector

CTN :40130996

21 May, 2025 NA

Khurda - Odisha

Tender For supply of welding portion for 60kg/60ei-r260/r-350 and for combination joints by at/skv process (single shot crucible technique) at site under sr.den(central) section of khurda road division.

Central Government/Public Sector

CTN :40131256

19 May, 2025 NA

Chennai - Tamil Nadu

Tender For mas-gdr section : supply of welding portions for 52 kg/ 60 kg /60 e1 -r 260 grade rails for various track works in den/east/mas jurisdiction.

Welding Portion Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector