Latest well head assembly Tenders | Government well head assembly Tenders

CTN :40065856

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts wells cesspits manhole pier hole,taking up down old unserviceable ci di pipes from trenches wall floor etc for repair with all fittings,all as per item no 2.00 here in before but of size 100 mm bore.,all as per item no 2.00 here in before but of size 150 mm bore.,all as per item no 2.00 here in before but of size 200 mm bore.,m l for refixing relaying of existing old di ci tubing of size 80 mm bore obtain from item no.2.00 here in before in new or existing,all as per item no 6.00 here in before but of size 100 mm bore obtain from item no. 3.00 here in before.,all as per item no 6.00 here in before but of size 150 mm bore obtain from item no. 4.00 here in before.,all as per item no 6.00 here in before but of size 200 mm bore obtain from item no. 5.00 here in before.,supply laying jointing testing of 80 mm bore centrifugally cast spun ductile iron pressure,all as per item no 10.00 here in before but of size 100 mm bor

State Government

CTN :40028605

19 Apr, 2025 NA

Khaperkheda - Maharashtra

Tender For work of reconditioning of journal shaft assembly and journal head assembly of xrp 1043 coal mill at unit#5, 500 mw, tps khaperkheda

State Government

CTN :40043641

30 Apr, 2025 1.20 Crore

Sukma - Chhattisgarh

Tender For construction, testing and commissioning of r.c.c. elevated service reservoir of 40kl capacities & staging 12. mt. including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber (02 nos)&providing, laying, jointing, interconnection, testing and commissioning of mm dia to 63 & 75 mm hdpe pe-100 , pn-6 pipe 90mm dia upvc class 6/10 kg/sqcm with suitable joints & 80 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying & installation of energy efficiant five star bee rating isi marked required capacity single & three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4"/6" tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe, ss /nylonwireropeandconnection cable including verification & electric connection from cseb, construction of brick masonry switch room of size 1.2*1.2*2.1 mtr, installation of 01 no. electro chlorinator , construction of chlorinator room of size 2.4*2.4*3.0 mtr , providing functional household tap connection(f.h.t.c) in individual households and government instiution etc. complete with trial run operation & maintanance for 03 months under single village of piped water supply scheme under jal jeevan mission for village- gumma ,(gp.) gumma block- chhindgarh, district sukma at risk and cost ( old sor)

CTN :40023756

23 Apr, 2025 190

Honnali - Karnataka

Tender For purchase of drinking water equipment and spare parts for sc/st colonies and all other villages under hattur gram panchayat limits - standextension bit, bucket washernitrile rubber, g.m.lower valve guide, g.m. upper valve guide, g.m. lower valve assembly, g.m. upper valve assembly, cylinder assemblycomplete set, standassembly non-telescopic, m12 x 50 mm long hex coupler, m10 x 40 bolts with nylock nut, m12 x 40 bolts with 2 nuts, ball bearing 6204z, handleaxle, chain withcoupling, connecting rods10 ft. (3 mtrs)., handle barwelded component, watertank assembly, thirdplate, head assembly (+ cover & axle), moter2hp 25 stg, moter2 hp 20 stg, moter3 hp 25 stg, moter3 hp 20 stg, moter pump14 stg, moter pump12 stg, moter pump10 stg, moter pump8 stg, mugmoter panlset, opnwell motersub15 h p, opn wellmotersub 12.5 h p, opn wellmotersub 10 h p, open well moter sub 7.5 h p, panl bord3 h p, panl bord2h p, moter2h p 25 stg, moter2 h p 20 stg, moter3 h p 25 stg, moter3 h p 20 stg, mug moter panlset, opn well moter sub 12.5 h p, moter6 h p 12 stg, moter8 h p 12 stg, moter5 h p 8 stg, moter6 h p 8 stg, mm 305 mtr 1100 v cable10 s q, axelframe, pn6 pe 100 hdpe pipe2 1/2mangalam, c r i n r v 3, v-guard moter 0.5 hp, pvc pipe90 mm 6kg, nut bolt3/8x11/2, wrench18pipe, pipe w.rench18, ring spanner24x26, duoble spanner24x26, duoble spanner14x15, double spanner12x13, ring spanner12x13, ring spanner18x19, duoble spanner18x19, ring spanner20x22, pipe w.rench 24, pipe w.rench 14, pipe w.rench 12, dol starter (13-21a), h d p pipe3mangalam, g i nippal3h d p, out door typepanel board, p nippl s s2h d, nipplss212hdp, fuse63 amps, pn6 pe100 hdpe pipe2 mangle, relay unit l&t, agri sl valve50 mm, nipple20x9, union32mm, g i coller25 mm (1, g i bend15 mm, g i nipple 3650 mm, g i coller25x20 1x3/4, g i coller20x15 1/2, g i elbow20x15 mm, pvc fta63 mm, pvc rmta75x63 mm, pvc rmta90x75 mm, pvc rmta90x 63 mm, repair saddle90mm, repair saddle110 mm, repair saddle63x15 mm, meteringpanel, flanz65 mm (slv), flanz50 mm (slv), end cap20 mm, mm r c75x63, mta15mm, g i nipple 3015 mm, g i nipple 2415 mm, g i nipple 3615 mm, gi nipple 4820 mm, g i nipple 3620 mm, gi nipple 615 mm, g i nipple6 50mm, g i elbow50 mm, pvc pipe15 mm 12, pvcpipe25mm3 4, g i nipp1850 mm, pvc ball valve90 mm, mm f t a15, mm f t a25, ashirvad column pipe32 mm, mm g i nippl50x12, g i bend50mm, g i coller20mm, g i elbow20 mm, ginipple620mm, gi nipple 1220 mm, g i nipple 1820 mm, g i nippl 20 mm 24, pvc ball valve25mm, pvc ball valve20 mm, pvc ball valve75mm, pvc coller 25 mm8kg, pvc coupler90mm4kg, g i coller50 mm, mm pvc r f t a75x63, s l valve 65 mm, pvc m t a 90mm 6kg, pvcthread elbow 90x75 mm, pvcball valve plane110 mm, pvc ball valve plane110 mm, pvc tee90 mm 6kg, pvc elbow90 mm 6kg, pvc end cap 63 mm 6kg, f t a pvc 63 mm, pvc elbow75mm6kg, l& t starter, reapere coller110 mm, reapere coller90 mm, fta pvc 90mm, pvc coller90mm, pvc coller 75mm, g ielbow2 isi, sp2preventer, motor panelboard, m t a pvc 63 mm, fuse100amps, flanz 110 mm, sp3 preventer, autostarter, tatapipe50mmgig, finolex sub cable 2.5 sq mm, bolt nut 12 mm, standassembly, g i b nipple 20x24, g i b nippe h 20x12, taper cock 20 mm, pvcshadlefinolex75x25mmb, axelblade, airvalve, aluminium coil 1000 feet 10 mm, borecap 2 10, shallacv, pvc elbow (thread)75x63 mm, g i bend isi 50 mm, mm g i nipple 50x12, gi coller heavy 50 mm, ashirvad ci top & bottom adopter 50mm, ashirvad column pipe50mm, g i nipple h 50x6, trangel boll valve 50 mm, moterunnati 7.5 h p 12 stg, aluminium coil 300ft 10 mm, clamp double nut bolts 2heavy, panelbox big, finolex sub cable 4.0 sq mm, pvc service shaddal finolex 63x25 mm, spanner 22 mm, pvc tee finolx 75 mm 6kg, novolt coil, pvc elbow finolex 75 mm 6kg, sj relay 20-32 a, pvc pipe finolex 75mm 4kg, meet ball valve p 65 mm, j k solvent 500 ml, pvc elbow finolex 63 mm 6kg, ball vale pvc p 63 mm, pvc pipe 6kg finolex 40 mm, p v c pipe finolex 63 mm 4kg, jk solution 100 ml, reapere coller finolex 63mm

CTN :39854175

25 Apr, 2025 26.97 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-11166 supply of m/s dcips make spares for clinker grinder, jet pump and feed gate for bottom ash hopper and wetting head system for wet ash disposal from esp hoppers unit 5 ash handing plant of kstps, kota. - spares for excen crusher (clinker grinder) as per drg. no. 92-p-07-2b-582 of ahp stage-iii, cam group structure, material-durite, 500 bhn (part no. 1) 1 set = 8 nos., wear plate front (part no. 3) 1 set = 3 nos., wear plate back (part no. 4) 1 set = 3 nos., wear plate side (part no. 5) 1 set = 4 nos. (2 rh & 2 lh), shaft (shaft with shaft structure fitted with cam group structure, shaft sleeve, cam bolt etc.) material en24 part no. 2 - 1 set = 1 no., bearing housing for above clinker grinder (part no. 7), packing gland followers (part no. 12), packing gland (part no. 9) 1 set=2 nos., slinger (part no. 14), lantern ring material al. bronze(part no. 10), shaft sleeve ss410 (part no. 15), special type self locking square head bolt (ss410) with nut & lock nut with washer for segment plates, jet pulsion pump as per drg. no. 92-p-07-2b-591, jet pulsion pump complete assembly (1 no.) assembly consists of body combining tube, nozzle with insert, adapter, aligning ring flange clamp etc. but without tail pipe, spares for jet pulsion pump as per drg. no. 92-p-07-2b-591, combining tube, material -durite 500 bhn (throat cum tail pipe) (part no. 1), nozzle tip (ss-410) with nozzle insert (material ceremic) (part no. 2 & 13), nozzle adapter (part no. 3), flange clamp half , material ductile iron (n-8)(part no. 16), 9 flange clamp half (part no. 18), aligning ring (part no. 10), spares for ba hopper feed gate as per drg. no. 92p07-1b-572, renewable seat strip (part no. 2), side liner (part no. 3), bottom liner (part no. 4), roller (part no. 17), bush for roller (part no. 25), adjustable seating wedge (part no. 13), fly ash intake valve drg. no. 9207-2b-22, fly ash intake valve complete as per drg. no. 9207-2b-22, fly ash intake valve spares parts: -, hopper inlet body spares for faiv (part no. 1) for fly ash intake valve, body intake valve spares for for fly ash intake valve (part no. 2), nuva alloy 8 inch tee for ash intake valve (part no. 3), valve disc spares for for fly ash intake valve (part no. 4), removable seat spares for fly ash intake valve (part no. 5), shaft spares for fly ash intake valve (part no. 6), spring spares for fly ash intake valve (part no. 7), roll pin spares for fly ash intake valve (part no. 8), air cylinder 2.5" borex5" stroke spares for fly ash intake valve (part no. 9), yoke spares for fly ash intake valve (part no. 13), lever spares for fly ash intake valve (part no. 14), lever spares for fly ash intake valve (part no. 15), seal kit for air cylinder 2.5 bore x 5 stroke of fly ash intake valve, air intake valve drg. no. 9207-2a-11, air intake valve complete as per drg. no. 9207-2a-11, air intake valve spares parts: -, body spares for air intake valve (part no. 1), valve disc, ss- 316 spares for air intake valve (part no. 2), compression spring, steel-en 42b spares for air intake valve (part no. 3), valve stem, ss-410/416 spares for air intake valve (part no. 4), totally enclosed rotary slide gate drg. no. 9207-2a-40, totally enclosed rotary slide gate valve complete as per drg. no. 9207-2a-40, totally enclosed rotary slide gate (tersg) spares parts: -, bode spares for totally enclosed rotary slide gate valve (part no. 1), slide spares for totally enclosed rotary slide gate valve (part no. 2), shaft, en-8 spares for totally enclosed rotary slide gate valve (part no. 3), bush, bronze spares for totally enclosed rotary slide gate valve (part no. 4), seal strip, nitrile rubber spares for totally enclosed rotary slide gate valve (part no. 5), air cylinder spares for totally enclosed rotary slide gate valve (part no. 10), wetting unit head assembly spares parts:, body inlet piece, alloy ci spares for wetting unit head assembly (part no. 1), water chamber, fg-220, is-210 spares for wetti

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :39489174

05 May, 2025 14.26 Lacs

Kheda - Gujarat

Tender For corrigendum : the work of repairing / rebuilding and machining / reconditioning of dimensions of work gear hub & journal head assembly of coal mill xrp-783 at wtps

Central Government/Public Sector

CTN :39792928

23 Apr, 2025 1.40 Crore

Jabalpur - Madhya Pradesh

Tender For corrigendum : special repair to conversion of existing main rising(supply line) ci to di and distribution pipe line including sluice valve, valve pit and allied fittings of offrs md accn mandir colony, shaitan enclave, ashiyana line) under ge (east) jabalpur

corporations/Associations/Others

CTN :38195252

21 Apr, 2025 4.68 Crore

Bengaluru - Karnataka

Tender For corrigendum : procurement of nrc engine spares - input pipe for turbo charger ll bsiii, ll bsiv, sa of dipstick guide ll bsiii, ll bsiv, starter ring ll bsiii, ll bsiv, engine oil cap hino ll bsiii, spacer washer ll bsiii, ll bsiv, "s" cam distance piece ll bsiii, flange coupling ll bsiii, oil cooler plate hino ll bsiii, sa of vehicle speed sensor ll bsiii, stopper plate ll bsiii, ll bsiv, ignition relay ll bsiii , oil cooler four plate hino ll bsiii, bsiv, acclerator cable ll bsiii, vaccum indicator ll bsiii, ll bsiv, fuel head assembly ll bsiii, oil cooler 'o' ring ll bsiii, ll bsiv, valve cap ll bsiii, ll midi bsiii, oil drain pipe ll bsiii, ll bsiv, thermostat ll bsiii, engine speed sensor ll bsiii, water temp sensor ll bsiii, ll bsiv, boost procure temp sensor ll bsiii, isolator noise tt bsiii, tt bsiv, tube dip stick tt bsiii, tube dip stick tt bsiii, tt bsiv, dipstick tt bsiii, tt bsiv, dip stick tt bsiii, tt bsiv, plug expansion tt bsiii, tt bsiv, plug expansion tt bsiii, dipstick tt bsiii, tube oil guage tt bsiii, tube oil guage tt bsiii, flywheel tt bsiii, flywheel tt bsiii, clamp v band tt bsiii, tt bsiv, clamp v band tt bsiii, tt bsiv, thermostat tc tt bsii, pin timing tt bsiii, plug expansion tt bsiii, plug expansion tt bsiii, racker lever assembly tt bsiii, tt bsiv, connecting rod bolt tt bsiii, thermostat 1616 tt bsiv, accl pedal sensor ll midi bsiv, urea tank cap ll midi bsiv, oil cooler plate ll bsiv, connecting-rod bsiv, damper pully tt bsiv, cam shaft tt bsiii, injectior washer hino ll bsiii, ll bsiv, flywheel face plate ll bsiii, ll bsiv, gear fip drive 60 teeth ll bsiii, fan blade assy bsii (4 hole/10 leaf) ll bsiii, ll bsiv, fly wheel bolt hino ll bsiii, themostat mtl ll bsiii, ll bsiv, engine mounting bracket rh ll bsiii, ll bsiv, disel main hose (tank to hand primer) ll bsiv, dip stick guage ll bsiii, ll bsiv, crdi pressure relief valve ll bsiv, cap assembly fuel tank tt bsvi, thermostat eic bsiii , fly wheel gear ring tt bsiii, assembly fly wheel with ring gear tt bsiii, fly wheel asembly eic bsiii, assembly fly wheel and ring gear 694 auto eic bsiv, ring gear fly wheel e694 auto eic bsiv, viscous fan controlling unit eic bsiv, thermostat eic bsiii, engine oil cap eic bsiii, eic bsiv, fly wheel ring eic bsiii, shim speed sensor eiv bsiv, thermostat eic bsiii, eic bsiv, assy idler pulley eic bsiv, viscus fan assembly eic bsiv, oil cooler inner eic bsiii, engine oil cap tt bsiii, cool breather ll bsiii, ll bsiv, clip engine breather eic bsiii, eic bsiv, cooler plate assbly eic bsiv, speed sensor mtg ll bsiii, tharmostat ll bsiii, ll bsiv, ll bsvi, pipe by pass eic bsiii, idler bracket eic bsiv, spacer bearing front eic bsiii, eic bsiv, damper pully ll bsiii, sa of guage dip stick slf ll bsiii, fuel tank cap ll bsiv, thermostat tt midi bsiii, rocker pedestal eic bsiv, flywheel ring (138 teeth) tt bsiii, tata engine oil cap tt bsiii, tt bsiv, thermostat tt bsiii, tt bsiv, thermosta assembly tt bsiv, plug expansion tt bsiii, coller egr unit cooler exhaust gasreci ll bsiv , assy oil cooler eic bsiv, exhaust manifold 6 hole ll bsiv, egr valve and actuator assembly ll bsiv, body oil coller eic bsiii, pendant type elec acc pedal flr mtd ll bsiv, egr pipe in second line ll bsiv, hose engine breather eic bsiv, dip stick assy eic bsiii, assy breather hose eic bsiv, gauge oil level eic bsiv, overhaul kit turbo charger ll bsiii, honey well minor repair kit ll bsiii, proximity sensor ll bsiii bsiv, brake liningade fuse 10amp ll bsiii , minor repair kit eic bsiii, oil cooler element eic bsiv, pressure sensor-common rail ll bsiv tt bsiv, turbo repair kit tt bsiv, fuse 5 amps ll bsiii , fan belt tensioner eic bsiv, speed sensor tt bsiv ll bsiv, oil pressure sensor ll bsiv, engine speed sensor ll bsiv, turbo charger repair kit ll bsiv, oil pressure sensor eic bsiv, dipstick tt bsiii bsiv, fuse 30 amps ll bsiii , secondary repair kit tt bsiii, rocker switch battery cut off 24v eic bsiv, fuse blade type ll bsiii bsiv, fuel

Corporations/Associations/Others

CTN :39977706

17 Apr, 2025 NA

Palghar - Maharashtra

Tender For annual tender for supply of necessary materials for pipeline maintenance and repair works at various places in the city for the water supply department of palghar municipal council - (a) c.i./d.i./valves/ fittings, 100 mm d.i k-9 pipe (158329-2000), 150 mm d.i k-9 pipe, 200 mm d.i k-9 pipe, 250 mm d.i k-9 pipe, 300 mm d.i k-9 pipe, 100 mm d.i k-7 pipe, 150 mm d.i k-7 pipe, 200 mm d.i k-7 pipe, 250 mm d.i k-7 pipe, 300 mm d.i k-7 pipe, 80mm dia d. i. mech. joint - collar / coupling, 100mm dia d. i. mech. joint - collar / coupling, 150mm dia d. i. mech. joint - collar / coupling, 200mm dia d. i. mech. joint - collar / coupling, 250mm dia d. i. mech. joint - collar / coupling, 300mm dia d. i. mech. joint - collar / coupling, 450mm dia d. i. mech. joint - collar / coupling, 80mm dia d. i. mech. joint - d/ socket bend 900, 100mm dia d. i. mech. joint - d/ socket bend 900, 150mm dia d. i. mech. joint - d/ socket bend 900, 200mm dia d. i. mech. joint - d/ socket bend 900, 250mm dia d. i. mech. joint - d/ socket bend 900, 100 x 80mm dia d. i. mech. joint - d/s concentric reducer, 150 x 80mm dia d. i. mech. joint - d/s concentric reducer, 150 x 100mm dia d. i. mech. joint - d/s concentric reducer, 200 x 80mm dia d. i. mech. joint - d/s concentric reducer, 200 x 100mm dia d. i. mech. joint - d/s concentric reducer, 200 x 150mm dia d. i. mech. joint - d/s concentric reducer, 250 x 80mm dia d. i. mech. joint - d/s concentric reducer, 250 x 100mm dia d. i. mech. joint - d/s concentric reducer, 250 x 150mm dia d. i. mech. joint - d/s concentric reducer, 250 x 200mm dia d. i. mech. joint - d/s concentric reducer, 300 x 150mm dia d. i. mech. joint - d/s concentric reducer, 80 x 80mm dia d. i. mech. joint - all socket tee, 100 x 80mm dia d. i. mech. joint - all socket tee, 100 x 100mm dia d. i. mech. joint - all socket tee, 150 x 80mm dia c. i. mech. joint - all socket tee, 150 x 150mm dia d. i. mech. joint - all socket tee, 200 x 100mm dia d. i. mech. joint - all socket tee, 200 x 200mm dia d. i. mech. joint - all socket tee, 250 x 100mm dia d. i. mech. joint - all socket tee, 250 x 200mm dia d. i. mech. joint - all socket tee, 250 x 250mm dia d. i. mech. joint - all socket tee, 300 x 100mm dia d. i. mech. joint - all socket tee, 300 x 200mm dia d. i. mech. joint - all socket tee, 300 x 300mm dia d. i. mech. joint - all socket tee, 300 x 100mm dia d. i. mech. joint - d/s concentric reducer, 80mm dia d. i. mech. joint - flange socket pn-10, 100mm dia d. i. mech. joint - flange socket pn-10, 150mm dia d. i. mech. joint - flange socket pn-10, 200mm dia d. i. mech. joint - flange socket pn-10, 250mm dia d. i. mech. joint - flange socket pn-10, 50mm c.i. d/ f sluice valve pn-1.6 (is 14846), 65mm c.i. d/ f sluice valve pn-1.6 (is 14846), 80mm c.i. d/ f sluice valve pn-1.6 (is 14846), 100mm c.i. d/ f sluice valve pn-1.6 (is 14846), 150mm c.i. d/ f sluice valve pn-1.6 (is 14846), 200mm c.i. d/ f sluice valve pn-1.6 (is 14846), 250mm c.i. d/ f sluice valve pn-1.6 (is 14846), 80 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 100 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 150 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 200 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 250 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 300 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 350 mm di joint ring (s.b.r gasket for c.i./ d.i. pipe), 80mm - c.i.d joint (is-1538/1993) class 20, 100mm - c.i.d joint (is-1538/1993), 150mm - c.i.d joint (is-1538/1993), 200mm - c.i.d joint (is-1538/1993), 250mm - c.i.d joint (is-1538/1993), 300mm - c.i.d joint (is-1538/1993), 80mm d/f n.r.valve, 100mm d/f n.r.valve, 150 mm c. i. d/f n.r.valve (is 5312-1984) pn-1.6, 200 mm c. i. d/f n.r.valve (is 5312-1984) pn-1.6, 250 mm c. i. d/f n.r.valve (is 5312-1984) pn-1.6, 300 mm c. i. d/f n.r.valve (is 5312-1984) pn-1.6, 350 mm c. i. d/f n.r.valve (is 5312-1984) pn-1.6, 400 mm c. i. d/f n.r.valve (is 5312-1984) pn-1.6, 250 mm c. i. d/f n.r.valve (is 5

Well Head Assembly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

Corporations/Associations/Others