Latest wheel nut Tenders | Government wheel nut Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38583177

30 Dec, 2024 NA

Erode - Tamil Nadu

Tender For supply of bolts ms black hex.head round body with hex.nuts m20 x 90 mm.to is.1363/84 part 1 & 3.

Central Government/Public Sector

CTN :38583294

31 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of bolt ms black hex. head round body with hex.nuts m12 x 50mm to is.1363-1984 part 1 & 3.

Central Government/Public Sector

CTN :38570204

31 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of bolt ms black hex head round body with hex nuts m16 dia x 65mm long to i s.1363/1984.is.1363/84.part 1 & 3 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604882

02 Jan, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of bolts ms black hex head round body with hex nuts m-16 x 75mm to is: 1363/1984 rev.1 (reaffirmed part 1&3/1992). [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :38567978

18 Dec, 2024 NA

Angul - Odisha

Tender For supply of hex. head bolt & nuts m 12 x 45 mm of product grade 'c' m.s. black is: 1363 (p art-i) 2002 (4th rev.) and is:1363 (part - 3) 1992 (3rd rev.) property class 4.6 for bolt and property class 4.0 for nut. [ warranty period: 30 months after the date of delivery ]

CTN :38557782

02 Jan, 2025 NA

Bardhaman - West Bengal

Tender For supply of excavator i fuel fileter , excavator i filter cap , excavator i filter engine oil , excavator i ignition switch , excavator i shimb , excavator i fuze 20 amp , excavator i fuze 15 amp , excavator i 3 by 4 inch rear wheel nut , excavator i 12 v micro relay 20a resistor , excavator i 12 v micro relay 10a resistor , excavator i 3 by 4 inch nut , excavator i face fan , excavator i wheel stud , excavator i tube rear , excavator i door handle , excavator i 6 in 1 clamp shovel jack seal , excavator i fan belt , excavator i greese nipple , excavator i hose , excavator i tooth bucket , excavator i rear tyre , excavator i side cutter left and right , excavator i bolt plough 3 by 4 inch unf x 70 mm , excavator i nut 3 by 4 inch , excavator i loader jack seal , excavator ii bucket shim , excavator ii bucket teeth , excavator ii nut bolt , excavator ii oil filter , excavator ii lubrication oil filter , excavator ii swing motor drain line cartridge , excavator ii fan belt 1400mm , excavator ii relay bty 24 v 100 a , excavator ii fuel filter cap , excavator ii fuel filter element , excavator ii wiper with motor , excavator ii fan , excavator ii adaptor , excavator ii air cleaner outer , excavator ii air cleaner inner , excavator ii adaptor lock

CTN :38518566

31 Dec, 2024 NA

Rewari - Haryana

Tender For supply of vehicle spare parts and mechanic tools - clutch master cylinder , air filter , wiper arm , indicator,parking top light , fuel filter , clutch plate, pressure plate, release bearing clutch, pilot brg , rear digi lock , front indicator assy. , oil filter partno-252718130145 , roof light led 24 volt , relay 4 pin , relay 5 pin , switch dashboard , oil filter part no-252518130139 , baby filter , oil filter , front break adjuster , indicator assy. front , wiper blade , gate valve 01inch pipe , gate valve 2.5 inch pipe , door lock handle outer lh rh , door glass beeding , door glass regulator machine rear rh , door glass regulator machine rear lh , floor mat , foot mat set 7d , door visor set rain guard set , data cable , back rest amron , door curtain set , hand rest , flag rod , commandant plate , star box set , star box stand , fan assy.radiator , bearing housing , fan pully , tensioner idealer , bearing fan pully , dala wire , rear view mirror , head light bulb , disc break , ball joint upper , ball joint lower , suspension bush kit , tie rod outer , kit lined shoes , wheel cylinder , shock absorbar , kit pad assembly , link stablisar rod rh , link stablisar lh , spring adjuster , wheel nut , fuel level sensor , fan electric assy. radiator , front hub oil seal , brg inner front , brg outer front , hub nut , clutch sleave cylinder , clutch plate, pressure plate, clutch release brg, pilot brg , front indicator assy. lh , front indicator assy. rh , back light assy. , spark plug , fuel pump motor , battery terminal plus,minus , nut bolt 14no. 16no. 18no. , lt wire .1mm , fuse 10,15,20,30,40,amr , horn 12 volt , horn 24 volt , welding rod 10 no. , welding rod 08 no. , wire lock , flasher 12 volt , areldite tube small , splite pin assorted size , fog light 12 volt , fog light 24 volt , commander light blue , sticker 12 no,05,no , bulb 67 no.24 volt , bulb 24 volt , bulb 24 volt 2441 , bulb 67 no. 12 volt , bulb 1016 no. 12 volt , bulb 1141 no.12volt , meter bulb 12 volt , meter bulb 24 volt , emery paper , old dhoti , duster cloth , putty , metal paste , cutter blade , socket no. 34 taparia , socket no. 36 taparia , socket no. 38 taparia , socket no. 41 taparia , socket no. 42 taparia , socket no. 46 taparia , alen key set star type , t socket wrinch no.08 , t socket wrinch no.09 , t socket wrinch no.10 , t socket wrinch no.11 , t socket wrinch no.12 , t socket wrinch no.13 , t socket wrinch no.14 , half moon spenner no.12x13 , half moon spenner no.16x17 , half moon spenner no. 18x19 , solding iron , solding paste and wire , locking plair , pipe rinch 60mm , combination spaner set , tool trolly with tools , tool box with tools , blow lamp , clutch and pressure plate , clutch release brg. , pilot brg. , power window switch , door glass machine rr , door glass machine rl , timing belt , heater glow plugs , glow plug timer bid details/ 2 / 114

CTN :38560511

28 Dec, 2024 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt

CTN :38588597

06 Jan, 2025 1.71 Crore

Kupwara - Jammu And Kashmir

Tender For supply of hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms,shs 6 mm thick size 120x120mm x 2.4m long for column with holes as per tech spec,ismb 150 rsj 150 x 75 mm 1.85 mtr long for beam conforming to relevant is as per tech spec att,ismb 150 rsj 150 x 75 mm 60 cm mtr long for beam conforming to relevant is as per tech spec att,ismb 125 rsj 125 x 70mm 3.0m long for beam conforming to relevant is as per tech spec att,shs 6 mm thick size 70x70mm x 1.85m long for with conforming to is as per tech spec att,6mm thick ms plate 75x150mm welded with g1 beam connected with nut and bolts,6mm thick ms plate 100mm x 100mm with a gap of 75mm as per tech spec att,12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column,6mm thick ms base plate of size 150 x150 mm for shs column as per tech spec att,steel roofing trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att,ms hexagonal nuts bolts and washers 12 mm dia 40 mm long.,ldpe sh

Wheel Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector