Latest wind energy Tenders | Government wind energy Tenders

CTN :41315640

16 Aug, 2025 NA

Bangalore - Karnataka

Tender For supply of release bearing - clutch plare assy , release bearing , exhaust brake system removing and full service and fitting , ramp assy removing he vehcile and taken to machine shop, stripping, checking, cleaning all damaged seals, springs o ring change and ramp assy and testing and fitting the veh hoos operated , transfer mounting bracket , clutch plate assy , pressure plate assy , the above mentioned old parts removing and afterr servicing fitting the vehcile, vehcile tesing mechanical charge , 4x4 assy checking and fully removing full electric connection checking and mechanical fault removing and testing 4x4 , igniition switch , windscreen , relay 12 and 24v , full electrical checking, damaged burning loom change and electrical system service, all light, wiper all testing , labour for mechanical charge , door lock rh and lh , door mechanism rh and lh , wind screen , the above parts removing and new fitting inccluding windscreen removing and fitting , brake shoe lining with rivet , brake drum skimming , brake booster , auxiliary gear box mounting bracket , aixiliary gear box mounting bolt male and female , rotary switch , all wheel drum and brake shoe assy removing and old parts removing and all parts after servicing fitting the vehicle and brake testing mechanical charges , full electrical checking, all lighting system service damaged burning loom replaced and tested , ramp assy removing the vehcile abd taken to machine shop, stripping, checking, cleaning all damaged seals, springs o rings change and ramp assy and testing and fitting the vehcile hood operated , hood lifting pump removing and taken to machine shop stripping and checking parts seals and o rings damaged shaft damaged filling metal and finishing and pump assy and fitting vehvile hood , transfer mounting bracket auxiliary gear box , auxiliary gear box mounting male and nut and bolt , all electrical checking, service and burned and damaged looms change all plighting system testing , the above all parts removing the vehcile and after service fitting the vehcile testing mechanical charges , ignition switch , mounting bracket for transfer case , male and female nut and bolt for transfer case , clutch booster , above parts removing and new parts fitting mechanical charge , full electrical system checking and rectified of burning and damaged loom and sockets and relays

CTN :40874846

13 Aug, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : setting up wind project development including land, connectivity, balance of plant, row, wtg supply, engineering, procurement, construction & commissioning package for 3 mw (±10%) wind energy project in tamil nadu with comprehensive operation & maintenance for 10 years

Central Government/Public Sector

CTN :41323552

03 Sep, 2025 NA

Chennai - Tamil Nadu

Tender For supply of locomotive cab and machine room ventilation purpose workman cordless fan with following specification: maximum continuous use: 1270/705/575 min, max wind speed: 180 /150/120m/s, battery capacity: 18 v/5 ah, fan diameter: 180 mm,wind speed: 3 speed, automatic s winging: 45 deg l/r, on/off switch, adjustable handle, fan tilt up/down, dimension (l x w x h): 185 x 272 x 284 mm, net weight: 1.3-2.0 kg.standard accessories: tool-1 no, battery-1 no, cha rger: 1 no. make: makita dcf 102 or yato yt 82933 or dewalt dce 512b only. [ warranty period: 30 months after the date of delivery ]

CTN :41290858

08 Aug, 2025 1

Delhi - Delhi

Tender For providing of hiring of consultants - milestone/deliverable based - subject matter experts; pma for bhuj wind energy private limited (bwepl); no; hybrid(as specified in scope of work)

CTN :41192235

08 Aug, 2025 13.23 Lacs

Gwalior - Madhya Pradesh

Tender For purchase of gym equipment file no. 106/24x2/10, 4th call - ac motor - 4.5hp/8hpspeed - 1.0-22.0 kmphincline - 0-20% automaticrunning area - 1620x600 mm, 65x24 inch (approx)user weight - 200kg max, fly wheel - 20kg fly wheelsteel wheel - transportation wheel for easy transportuser weight - 150kg max, fly wheel - 18kg fly wheelbrake - fiction breaking system & emergency locksaddle - horizontally & vertically adjustiblehandle bar - vertically adjustable user weight - 150 kg max, square tube - 50x100mmweight stacks - 40 kgnw/gw 60 kg/ 66 kg, minimum size - 1570x660x700 mmcaps - all caps are in round metalnw/gw - 21.2kg/22.6kg, monitor - time speed distance calories ressistance - wind resistance rowing machines with 10 levels adjustment machine size - 2350x630x360 mmuser weight - 230 kg maxnw/gw 31kg/37kg, frame size - 50x70 mm squareweight stack - 110lbs x 4 (440lbs) plastic coating weight (pvc) plates & cast cement insidemachine - high density upholstered seat & back pads high intensity navigation durable wire steel with 6 mm diameter, tube - high strength steel tube precision weld cable - internally lubricated cable 6 mm square tube 50x100 mm (2.5 mm thickness) cover - with both side full metal seat cushion - 65mm thickness caps - all caps should be in metal size - 1650x1030x1630 mm weight stack - 110kg (steel) nw/gw - 257kg/291kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thickness) seat cushion - 65mm thickness, caps - all caps should be metal, size - 1500x710x990 mm, type - plate loaded machine, nw/gw - 52kg/63.6kg, tube - high strength steel tube precision weld, cable - internally lubricated cable 6 mm, coating - two round powder coating, square tube - 50x100mm, thickness - 2.5mm, size - 1140x940x1370mm, weight stack - 100 kg (steel), machine weight - 190 kg, tube - high strength tube precision weld, machine - high quality functional trainer, coating - two round powder coating, type - fully commercial, cable - 6 mm, weight stack - 100x2 kg, machine weight - 350 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube 50x100 mm (2.5mm thick), size - 1400x680x420 mm bench weight - 30 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100 mm (2.5mm thick), size - 1650x680x1000mm nw/gw - 40kg/46.2kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1060x680x1000mm nw/gw - 21kg/24.8kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1380x680x690mm nw/gw - 34kg/40kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1320x840x970mm , bench weight - 75 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1800x600x800mm , bench weight - 115 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thick), size - 1500x700x100mm, rack weight -75 kg, frame tube - flat oval 50x100x2.5t, square tube - 50x2.5t, cushion 1 - 895x360x55mm, cushion 2 - 455x205x55mm, cushion 3 - 550x520x55mm, cushion 4 - 454x408x55mm , cushion 5 - 250x140x80mm, size - 225x1357x1385mm, type - plate loaded machine, nw/gw - 259kg/298kg, frame tube - rectangular tube 50x80x2.5t, size - 1995x1910x2350mm, weight stack - 80x2 = 160 kg, net weight - 360 kg, size - 2.5kg, 5kg, 7.5kg, 10kg, 12.5kg, 15kg, 17.5kg, 20kg, 22.5kg, 25kg, 30kg, size - 10kg, size - 7.5kg, 10kg, 12.5kg, 15 kg, size - 3feet, 4feet, 5feet, 6feet, size - 3feet, 4feet, size - 18 inch, tricep handle, tricep rope, rod stand, size - 1kg, 2kg, thickness - 38mm, length - 15m, curl rod olympic 3 4, pushup stand, olympic weight dead lifting, skipping rope,

CTN :41232643

14 Aug, 2025 NA

Nalanda - Bihar

Tender For supply of electrical and electronics engineering lab equipment - multimeter, r-l-c kit, measuring tools, wood working tools marking and measuring tools, vice, work benches, welding machine, dc servo me moto, ac servo motor, synchro transmitter and receiver kit, standard test signal generator, plc trainer kit, digital multimeter, scr, mosfet, igbt vice, triac, diac, passive components, capacitors, potentiometer, incandescent lamp, experimental thyristorised kits, dc ammeter, dc voltmeter, dc voltmeter, ac voltmeter, ac voltmeter, ac ammeter, single phase electrodynamo meter, digital portable lcr meter, cut-set model of de machine, cut-set model of ac machine, veryfication of kcl & kvl kit, analog metal network theory trainer kit, digital storage oscilloscope, clamp meter, wheatstone bridge, demonstration kit for wind generation, solar simulator for solar cell, solar energy trainer with grouping of solar cells, solar cell kit, electrical wiring and switch gear rack, cathode ray oscilloscope, digital storage oscilloscope, rf signal generator, regulated power supply, amplitude modulation demodulation trainer kit, fm trainer kit, digital multimeter, trainer kit for fm modulator using ic 566, trainer kit for fm demodulator using ic 565, equipment required, microcontroller trainer kit, cro/dso, stepper motor, trainer board, 7- segment led display, multimeter, trainer board, trainer board, trainer board, sensors, equipment required, trainer kit for generation and detection of pam, pwm & ppm, pcm, dpcm, dm and adm trainer kit, ask, fsk and psk trainer kit for generation and detection, fhss and dsss trainer kit, qpsk and qam trainer kit, variable dc power supply, digital oscilloscope, spectrum analyzer, function generator

Central Government/Public Sector

CTN :41185867

06 Aug, 2025 1.95 Lacs

Jamnagar - Gujarat

Tender For supply of lp of naval store items against nac d d - paint silver , paint signal red , paint navy blue , paint golden yellow , paint ffu finishing exterior synthetic dark grey , paint black enamel , paint azure blue , call boat swain , face mask , fluorescent tape yellow 4 inch , twine sewing medium flux , twine sewing fine , chain ni silver for call boatswain , ear seal for protector plug 3 m , wiper soft rubber , wind socks , cotton rags colored , cotton waste , steel cleaning liquid , spin mop set , wiper long handle , brush with long handle , scrubber with handle , abrasive cleaning pad or scrubber pad , cleaning bar for utensils 500 gms , plastic mug , mosquito repellent machine with liquid , refill for automatic air freshener 250 ml , rat sticking gel , distilled water , naphthalene balls , gash bag 24 inch x 30 inch x 75 micron , dust bin with cover combined , detergent powder in 01 kg pack isi mark , distemper white , paint roller 6 inch , paint brush 4 inch , mosquito repellent gel odomos , paint roller 9 inch , spray hand liquid insecticide , jubilee clip 3 inch , paint brush 2 inch , fibber duster brush , wonder tape 2 inch , tape transparent 2 inch , envelope cloth coated 12 inch x 16 inch , envelope cloth coated 10 inch x 14 inch , envelope cloth coated 9 inch x 12 inch , envelope size 10 inch x 14 inch , teflon tape , candle wax dia 19mm , tape transparent 1 inch ) /bid number : gem/2025/b/6478815 * /dated: 23-07-2025 & & / bid document 1 / 37

corporations/Associations/Others

CTN :41187362

07 Aug, 2025 50.00 Lacs

Somnath - Gujarat

Tender For annual rate contract for supplying of streetlight material for the fiscal year - supply 24w led street light makebajaj/crompton/havells/oreva/halonix/ c&s, supply 36w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 45w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 100w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 120w led street light makebajaj/crompton/havells/oreva/halonixc&s, supply 50w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 100w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 150w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 200w led flood light makebajaj/crompton/havells/oreva/halonixc&s, supply 22w led tube light complite fitting makebajaj/crompton/havells/oreva/c&s/syska/ushahalonix, supply alluminumarmourd cable 4core 6.0sqmm, supply 9 inch exhaust fan make- bajaj/crompton/havells/ushahalonix, supply ceiling fan-48inch makebajaj/crompton/havells/usha/orpat/polycab, supplying dwc pipe- 50mm size, supplying fan regulator-5 step moduler type, supplying frls wire of 1.0 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 1.5 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 2.5 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying frls wire of 4.0 sqmm cu wire makehavells,rr,polycab,finolex,kei, supplying 4 core 2.5sqmm armoured copper cable makehavells,rr,polycab,finolex,kei, supplying 4 core 4.0sqmm armoured copper cable makehavells,rr,polycab,finolex,kei, supplying 4cx10 sqmmalluminumarmoured cable makehavells,rr,polycab,finolex,kei, supplying and erecting approved make octagonal pole made from hr sheet steel. the pole should be made as per is. and shall be coated with hot dip galvanizing as per is 2629/2633/4759, suitable suspend local wind speed with integral junction box consist of terminal plate of min 6mm hylam sheet, standard profile 35mmx7.5mm din-rail for mcb mounting, stud type terminal and arrangement for cable termination to be erected with suitable foundation (included) as per details given by manufacturer considering site requirement., (e) 7 mtr. long 70 mm top x 135 mm bottom dia, 3 mm thickness with 225mmx225mmx16mm base plate, 4-m20 bolts and 600mm long j-bolt.approx pole weight 67 kg, supplying psc pole 7 mtr height with 210kg weight, pvc /cotonteprol, supplying 3 star and above rated approved make window type air-conditioning machine comprising of hermetically sealed rotary compressor, condensing & evaporating unit, fan/blower motor, thermostat, relay, remote hand setsetc suitable for (b) 1.5 ton capacity, making trench in hard murrum / tar road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing 1:2:4 cement concrete foundation & 70 percentage pcc from bottom including excavation for the pole of size 60 x 60 x 150 cm. deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 9 & 10 mtr pole), supplying and erecting street light pole bracket comprising main b class ms pipe of 4.2 cm/require outside dia. complete with suitable b class m.s. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. suitable for side entry fitting brackets of following nos of arms. [a] single arm bracket 1 mt, supply alluminium service wire- 2 core 2.5 sqmm, supply copper service wire- 2 core 2.5 sqmm, 11 kv hand gloge, 11 kv combin

CTN :41101150

06 Aug, 2025 NA

Ernakulam - Kerala

Tender For custom bid for services - defect rectification of acsr 2 (south tower)-defect., in has reported that tracks are not available on display of acsr #2., defect identification., di for the same was undertaken on 13 jun 2025. it was found that the pedestal unit, was required to be replaced to rectify the defect., scope of work to undertake defect rectification., 1. spare part., the required pedestal unit for replacement will be provisioned by in on site. all other, components/ units of acsr #2 should be in place to operationalize the system., 2. manpower., three skilled technicians will be required to undertake the pedestal replacement work., one tower climber also needs to be available on site. the tower climber and two, technicians will be provisioned by hela., 3. material/ machinery., one overhead crane with a loading capacity of one ton lifting to a height of 35 mtrs is, required to undertake the work. the same will be provisioned by in., 4. tools and accessory., the following are required and will be provisioned by hela:-, (a) torque wrench, (b) level indicator, (c) eye hook -02, (d) two 50 mtrs rope, (e) silicon, (f) drill machine, (g) lubricant, (h) slings for lifting, 5. activity to be undertaken., the sequence of events for replacement of pedestal unit will be as tollows:-, (a) disconnect and remove all cables, wave guide ard units from the antennae assembly., (b) fitment of lifting eye hook on antenna and pass lifting slings to the eye hook. dismantle antenna from pedestal unit and keep it on even surface on, the ground with the help of overhead crane. special care is o be undertaken while handling waveguide., (c) hook on the pedestal unit on overhead crane and op an securing bolts, of pedestal unit. lift the pedestal and move to the ground with cap closed of all connectors., (d) hook up new pedestal and lift it to the tower top and w hen aligned with, the position of pedestal plate lower the pedestal on the plate and tight the nut, bolt with level indicator on top of the pedestal to confirm tht the same is at, zero level., (e) lift the antenna to the top of tower and fix it to the pede stal unit., (f) install all units of acsr on top of tower and fix connectors and waveguide to the antenna., (g) switch on power and carry out power checks and fo (hecks., (h) switch on the acsr server and carry out alignment of system to get the tracks appeared on the display., 6. safety., all man working on tower should wear safety belt, safety helmet and safety belt to be, tied on two rigid point at tower top. the man below tower for handlin activity should, wear helmet. the antennae assembly and pedestal unit should be se cured with twopoint safety rope while lifting and lowering the same to avoid any dan age to the man, and material view heavy wind, lifting jerk or swing of the crane sling., .

Wind Energy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others