Latest wind mill sale Tenders | Government wind mill sale Tenders

State Government

CTN :43117012

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of external lighting equipment installed at meethapur store and shamshan ghat molarband extension bps under badarpur constituency ac-53. - supplying and embedding 32 mm dia g.i. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required., supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required., supply of 45 w led new generation energy saving and environmental friendly long life led street light made up of pressure die cast aluminum housing with high efficient led as lighting source and pc cover having top opening separate driver compartment with ip66 protection and impact resistance of ik07., supply of pole mounted cable junction box of size 305x250x128mm having ip 65 protection with complete accessories as per site requirement. make:-sintex/hesel., fixing of control junction box with the help of nut, bolts, washers, fasteners etc. as per site requirement., wiring for circuit/sub main wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., installation, testing and commissioning of pre wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required.

State Government

CTN :43117029

17 Dec, 2025 NA

Delhi - Delhi

Tender For sic of submersible pump set and all allied e/m equipment for rebored tube well near h.no.-116c shahpur jat in greater kailash constituency ac-50. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 10 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point:200 lpm on 90 mtr. head. having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved make, supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted.a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no.b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 noc) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no.e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable bankingg) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos. complete wiring & installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated & pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs.make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., s/o nut & bolts of 1/2 dia of different size i.e. 1.5 dia& 2.5 long full threaded., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 8-10 inch diameter made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2 dia. with locking arrangement by nuts & bolt., earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

State Government

CTN :42957119

16 Dec, 2025 30.03 Lacs

Mandi - Himachal Pradesh

Tender For corrigendum : tender for,supply erection testing and commissioning of portable universal type, light weight, electronic, precision portable energy meter testing equipment at m and t sd s/nagar under m and t division hpsebl s/nagar.

Central Government/Public Sector

CTN :43128798

31 Dec, 2025 NA

Durg - Chhattisgarh

Tender For supply of high energy planetary ball milling set-up for mechanical alloying and mechanical milling

Central Government/Public Sector

CTN :43117125

15 Dec, 2025 NA

Pune - Maharashtra

Tender For tender for engaging a professional agency for development of stall in india energy week 2026 exhibition to be held from 27th - 30th january 2026 at ipshem, goa, india

Central Government/Public Sector

CTN :43114349

15 Dec, 2025 NA

Kolkata - West Bengal

Tender For refurbishing of internal electrical installation with new copper wiring/ rewiring, mcbs, provide & fixing of energy saving led light fittings, bldc ceiling / wall fans, computer points ,ac points etc. in news rooms and its adjacent corridor at 1st floor, news section, ddk office campus, kolkata.

Central Government/Public Sector

CTN :43138082

22 Dec, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of procurement of energy efficient 230 v ac operated.

corporations/Associations/Others

CTN :43122969

24 Dec, 2025 NA

Indore - Madhya Pradesh

Tender For auction sale of ptr 33/11 kv oftc 315 mva failed bgp without oil - 2 no.,aluminum wire-transformer winding scrap- 30 mt,11/33 kv ct/pt unit various capacity scrap without oil & stud, etc.,tank empty, iron steel scrap,insulated wires/cables scrap (pvc) armoured (alluminium) -17 mt,plastic scrap, ct meter fiber box scrap,energy meter scrap/defective (electronic) - 40 mt,lamination scrap,us bobin wooden scrap,gsm modem scrap

corporations/Associations/Others

CTN :43122971

24 Dec, 2025 NA

Indore - Madhya Pradesh

Tender For auction sale of 16 kva copper wound transfarmer without oil,iron steel scrap,11 kv ct/pt unit various capacity scrap without oil & stud,aluminum wire-transformer winding scrap,energy meter scrap/defective (electronic),steel stamping scrap

Wind Mill Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors