Latest wind screen glass Tenders | Government wind screen glass Tenders

Central Government / Public Sector

CTN :40068224

07 May, 2025 NA

Digboi - Assam

Tender For supply of trolley mounted portable complete screw pump with motor , mandatory spares for screw pump , site supervision for installation and commissioning of screw pump

corporations/Associations/Others

CTN :40065434

06 May, 2025 2.09 Lacs

Koderma - Jharkhand

Tender For procurement of spares for mekaster make rack pinion typeelevator installed at dvc ktps cable guide with double pu spring & j bolt big m10 x 125 mm with nut & washer (make-m/s mekaster), battery charger for elevator, part no-9032410-002, for m/s mekaster engineering make rack & pinion type elevator, single phase preventor relay (vsp 2) for mekaster make rack & pinion type elevator, part no. 25020105022, switch arm , part no.- 387019, for m/s mekaster engineering make rack & pinion type elevator, limit switch up & down- ll1 & switch arms, part no: 3000623-451/387019, make: mekaster, cage limit switchlla; part no.3000629- 120, spares for m/s mekaster engineering make rack & pinion type elevator, limit/ up & down cam with fastners & final limit cam, part no: 388468/388776, make: mekaster, proximity switch (sensor for limit cam) for mekaster make rack & pinion type elevator, part no. 3001606-101, cable trolley aluminium wheel make mekaster material aluminium part no.: 9029 644-101, three phase switch 63 amp ; part no.3000263-151 for for m/s mekaster engineering make rack & pinion type elevator

CTN :40044359

19 Jun, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mi-25/35 helicopter - extra fuel tank with support, adaptor for pressure filling of hyd sys, device for locking main lg shock strut, main rotor blade, hoist sling for wing, platform main rotor hub, horizontal stabiliser lh, housing assembly, bracket, panel for installation on main rotor blade, trolley oxygen charging accesssories, generator splined check tool, device for installation of connection rod, hoist sling for hydraulic units and apu, device for retaining pilots and operators doors during ejection, device for installation of lg wheel tyres inner tube, cooling fan, transceiver of r-828, cone for installation of main rotor blade attachment bolt, cone protective for installation of tail rotor, device for checking misalignment of axles in splined coupling, ground power unit, device for lg shock strut filling, sling for tgb, device for checking coaxiality for drive shaft support in tail boom, hydraulic unit, instrument

Central Government / Public Sector

CTN :39920465

30 Apr, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of supply of chassis mounted fire fighting equipment trailer trolley mounted fire fighting equipment - items as per sr. no. 01.001 of mr , supply of items as per sr. no. 01.002 of mr , supply of items as per sr. no. 01.003 of mr , supply of items as per sr. no. 01.004 of mr , site work for sr. no. 02.001 of mr , site work for sr. no. 02.002 of mr , site work for sr. no. 02.003 of mr , site work for sr. no. 02.004 of mr , transportation from vendors works to site for mr item sr. no. 01.001 , transportation from vendors works to site for mr item sr. no. 01.002 , transportation from vendors works to site for mr item sr. no. 01.003 , transportation from vendors works to site for mr item sr. no. 01.004 , supply of mandatory spares for mr item sr. no. 01.001 , training at site for mr item sr. no. 01.001 , training at site for mr item sr. no. 01.002 , training at site for mr item sr. no. 01.003

Central Government/Public Sector

CTN :40027995

12 May, 2025 NA

Bhusawal - Maharashtra

Tender For supply of sl trolley and their spares. (hydraulic lifting table, capacity: 3000 kg, platform size: 1500 m m x 1500 mm, overall length: 2000 mm. closed height: 400-450 mm, extended height 1500 mm, no. of w heel: 4 no. wheel material: mild steel, wheel dia: 175 mm- 200 mm, rare wheel: horizontal, front wheel: 1 80 degree revolving, t-handle will be provided for easy handling, operation manual by hand pump.) note: 1 ) mechanical stopper should be provided for maintenance purpose. [ warranty period: 30 months after th e date of delivery ]

CTN :40027560

29 Apr, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of wind screen glass for train 18 nosecone (1) icf drg. no. train-18/dtc/ac 72654001 (2) icf drg. no. train-18/dtc/ac 72610004. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government/Public Sector

CTN :40003629

29 Apr, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of wind screen glass(lookout glass)

CTN :39983039

27 May, 2025 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - torque wrench tool kit, test adopter, flow meter gauge, adapter, drop tank transportation trolly, firing circuit test, cable test, oxy trolley, adapter mechanical test, wrench, oxy repleshnising adaptor, a/c harmonization, sherlock tool kit, set of pipe for pressure generator, adaptor test, case test, crane workshop, thread insert tool, screwing tool kit, contact checking tool kit, oscilloscope, p/s airtightness test set, valve releasing, hoisting assy

CTN :39964731

29 Apr, 2025 NA

Ganganagar - Rajasthan

Tender For supply of wind screen glass , fuel filter , fan belt , clutch cable , belt timing , carbon brush holder , magnitic coil , oil filter , pull cable accelarator , bearing coupling

Wind Screen Glass Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector