Latest wind ventilator Tenders | Government wind ventilator Tenders

CTN :41615575

03 Sep, 2025 2.00 Lacs

Kathua - Jammu And Kashmir

Tender For tile work and remaining work of windows/ventilators/ toilet at panchayat ghar , panchayat jagatpur, block keerian gandyal

State Government

CTN :41596326

03 Sep, 2025 16.16 Lacs

Kangra - Himachal Pradesh

Tender For supply of material, transportation ,design, erection, testing, commissioning for for construction of complaint cum rest room at sakoh under electrical division lambagaon (seop 16/2025-26) - civil work, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size), random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand), centering and shuttering including strutting, propping etc. and removal of form for :, foundations, footings, bases of columns, etc. for mass concrete, coloumns, pillars, piers, abutments, posts and struts, lintels, beams, plinth beams, girders, bressumers and cantilevers, suspended floors, roofs, landings, balconies and access platform, edges of slabs and breaks in floors and walls under 20 cm wide, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more., supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer-in-charge., brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand)., half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1:4 (1 cement :4 coarse sand)., providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all comp

corporations/Associations/Others

CTN :41598586

15 Sep, 2025 NA

Villupuram - Tamil Nadu

Tender For improvement works of providing aluminum partition windows, ventilator, electrification etc at ce office new building at villupuram

CTN :41580973

08 Sep, 2025 19.99 Lacs

Multi City - Karnataka

Tender For supply of fixing furnitures in t narasipura tmc office (continuation work) - supplying wall mounting fan suitable to operate at single-phase 230v ac. supply 400 mm sweep i no 6.5.2 common sr2023-24 volume-6(kptcl,escoms&pwdele), providing & laying aluminium work for doors, windows , ventilators & aluminium partition with extruded built up standard tubular sections/appropriote sections & other sections of approved make confirming to is 733 & 1285, fixing with dash fasteners of required dia & size including necessary filling up the gaps at junctions., auditorium stage height work providing and constructing load bearing wall with solid concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 n/mm2 conforming to is 2185 (part i) 2005 and constructed with cm 1 4 as per is 2572 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.vol 02, i.no 6.32, p.no 17), office table for staff - brand parallem pre laminated sheet 18mm gauge size - h6 feet x w2.5 feet, plastic chairs for reception counter , councillor auditoriumproviding & fixing in wall lining flat pressed 3layer (medium density) particle board or graded wood pre laminated one side decorative lamination and other side balancing lamination grade i, type ii is 12823 marked, including priming coat on unexposed arrangements & screws etc.., complete (vol - 02, i no - 10.10. p no -70)., file storage wardrobe for employee cabin size-h6 feet x w4 feet x d1.5 inch specific-18mm gauge, pre laminated sheet

corporations/Associations/Others

CTN :41562287

09 Sep, 2025 3.75 Lacs

Tirunelveli - Tamil Nadu

Tender For maintenance of damaged window ventilator in truck terminal at pettai palayapettai link road in ward no17

Central Government/Public Sector

CTN :41490918

15 Sep, 2025 1.02 Crore

Jaisalmer - Rajasthan

Tender For repair/ replacement of wooden/ aluminium doors, pvc door, windows, ventilators, false ceiling and other connected items in pocket nos. 2, 3, 4, 16, 17, 18, 19, 20, 21 and 22 at mil stn jaisalmer under ge (a) jaisalmer

State Government

CTN :41009893

03 Sep, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of various carpentry work material for day to day maintenance work in colony area of wtps. - water proof plywood sheet-12mm thick-8x4, water proof plywood sheet-19mm thick-8x4, ten takora khatkhat lock, fibre mould built in shelf mirror, malasian kapoor wood of any different size and section of various members of doors, windows, ventilators etc.

Central Government/Public Sector

CTN :41259796

03 Sep, 2025 49.00 Lacs

Hyderabad - Telangana

Tender For corrigendum : repairs to chajja/ projection of window/ventilator, repair to plaster, plinth protection, cleaning of overhead drinking water tanks, repair to gi pipe and connected items at zone b drdotownship , mes qtrs, ge(i) office complex and chess complex at ka

Wind Ventilator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector