Latest winding cable Tenders | Government winding cable Tenders

Central Government / Public Sector

CTN :41709617

03 Oct, 2025 NA

Vijayawada - Andhra Pradesh

Tender For ph350-06 very high pressure thermoplastic elastomer jack hose as per the following specifications.1) dn : 102) id : 3/8 inch3) od : 0.690 inch4) working pressure : 10,000 psi.5) bursting pressure : 21,000 psi.6) temperature : -40 degree c to +100degrees c.makes: polyhose / superseal / parker/ brilon. note: 1) material - core thermoplastic elastomer with double braided steel wire. 2) each hose pipe length must be 40 metres, both ends fitted with 3/8 inch hydraulic pressure filled connectors.3) one sample should be got approved before effecting bulk supply.

CTN :41705608

15 Sep, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of expendabe stores d d - web thick og 32mm , web thick og 25mm , web thick og 13 mm , seals metallic lead 10mm , sealing was gde i , s cotton thread white 500m tube , rivets snap head copper dia 3 x 20mm , pins cotter split steel 8.0mm x 80mm , pins cotter split steel 8.0mm x 71mm , pins cotter split steel 4.0mm x 32mm , pins cotter split steel 2.5mm x 80mm , jointing asb f comp gr 3.2mm thick , jointing asb f comp gr 1.6mm thick 100 x 100cm , flux soldering zinc chloride solution , flux soldering paste , fevicol sr 998 , dubbin protective , cork sheet thick 6.4mm , cork sheet thick 2.4mm , cork sheet 1.6mm thick , paper wrapping waxed 841mm x 100mtr , paper wrapping tissue 500mm x 750mm , paper wrapping reinforced with hessian , paper wrapping frat 1189mm x 100mm , paper wrapping 1189mm x100 mtrs , paper wrapping waterproof plaint 1189mm , packing asb braided yarn core rd 9.5mm , nails steel wire round 75mm x 2.8mm , nails steel wire round 75mm x 2.5mm , nails steel wire round 70mm x 3.15mm , nails steel wire round 45mm x 2.5mm , nails steel wire round 25mm x 2 mm , nails steel wire round 15mm x 1.6mm , nails steel wire round 125mm x 5.6mm , nails steel spike square shank 125mm , nails brad steel cut 20mm x 1.50mm , sewing cotton poly white 500 mtrs , razor disposable blade , wire copper soft for general purpose , copper rod round 6.3mm , wire steel mild bright 2.50mm , wire steel mild annealed 1.25mm , wire steel mild annealed 0.56mm , wire steel mild bright 1.25mm , wire steel mild annealed 4mm , rod welding copper 5.00mm , adhesive synthetic resin hardner , quick fix , steel bar carbon hot rolled round 40mm ) /bid number : gem/2025/b/6644081 * /dated: 04-09-2025 & & / bid document 1 / 32

CTN :41699835

13 Sep, 2025 NA

Gurdaspur - Punjab

Tender For supply of pistong ring set , fuel pipe 19 oblique 19 , fuel pipe 17 oblique 19 , push road seal , oil pressure gauge , oil pressure gauge pipe , gasket rubber , switch , gasket , fan belt , pipe flexible , pipe fuel wire braided tank to pump , rust cleaner , fuel pipe flexible tank to filter , high pressure pipe , over flow pipe , fuel pipe complete , oil filter

CTN :41621627

18 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For supply of nylon braided pvc hose pipe.size- 15 mm id x 2.5 wt, , nylon braided pvc hose pipe size- 25 mm id x,4.5mm wt , rayon braided ,double ply, water,hose pipe , pvc hose, 4mm od x 2 to 3mm id , pvc hose, 6mm od x 4mm id , pvc hose pipe wire braided,40 mm id grey colour , transparent pvc hose pipe , reinforced heliflex pvc hose pipe,for use in lean chemical solution,as suction hose.as per annexure , reinforced heliflex pvc hose pipe,for use in lean chemical solution,as suction hose. as per annexure , reinforce heliflex pvc hose pipe,for use in lean chemical solution as,suction hose ,as per annexure , reinforce heliflex pvc hose pipe,for use in lean chemical solution as,suction hose , as per annexure , hose cotton braided double ply 38mm , reinforced heliflex pvc hose for,use in lean chemical solution as,suction hose.size-,38 mm id x 2.5 mm , reinforced heliflex pvc hose for,use in lean chemical solution as. as per annexure , reinforced heliflex pvc hose pipe,for use in lean chemical solution,as suction hose. , reinforced heliflex p.v.c hose,pipe to use in lean chemical,

Central Government/Public Sector

CTN :41650217

09 Sep, 2025 NA

Raigarh - Chhattisgarh

Tender For supply of earthing and lightning protection materials d d 0 65x8 galvanized ms flat , 50x6 galvanized ms flat , 25x6 galvanized ms flat , 25x3 galvanized ms flat , 8 swg gs wire , 40mm dia, 3mtr long ms rod earth electrodes pointed at one end , electronic earth pit as per sl no 7 of annexure 1 to technical specification no is-1-23- 2001-021 , treated earth pit as per sl no 8 of annexure 1 to technical specification no is-1-23-2001-021 , test earth pit as per sl no 9 of annexure 1 to technical specification no is- 1-23-2001-021 , flexible copper braided conductor -75x600 mm with mounting and connecting accessories , galvanised ms rod vertical conductor as per sl no 11 of annexure 1 to technical specification no is-1-23-2001-021 , test link with box- test link should be suitable for material size 25x6mm, complete with mounting hardware , clamp for fixing 25x6 gs flat along with necessary hardware. , 40mm dia ms rod , 50 nb galvanised ms perforated pipe 3mtr long pipe , ismc 100 , ismc 150 , total freight charges for complete scope of supplies

Central Government/Public Sector

CTN :41650983

09 Sep, 2025 NA

Raigad - Maharashtra

Tender For supply of ss 304 double braided flexible hose with ss 304 wire braiding nominal dia 2" length 4 mtr, end conne , 25 nb ss-304 double braided flexible hose one end of 1" with female threaded union ndt and other end , pvc hose pipe size 1 inch. id reinforced good quality blue transparan t

CTN :41577585

17 Sep, 2025 NA

Mumbai - Maharashtra

Tender For e03-cardiology consumables ptca accessories/drugs - ptca wire torquers, guide wire torquer, ptca introducer needle (y connector compatible), push only - torque minimal catheters, push only - torque minimal catheters, push only - torque minimal catheters, push only - torque minimal catheters, torqueable braided microcatheters, torqueable braided microcatheters, torqueable braided microcatheters, dual lumen and side branch acccess microcatheters, dual lumen and side branch acccess microcatheters, guide extension catheters, guide extension catheters, guide extension catheters, thrombus aspiration catheter, thrombus aspiration catheter, thrombus aspiration catheter, low tip load cto wires ( 1.0 gf), low tip load cto wires ( 1.0 gf), low tip load cto wires ( 1.0 gf), medium tip load wires (1.0 3.0 gf), medium tip load wires (1.0 3.0 gf), medium tip load wires (1.0 3.0 gf), medium tip load wires (1.0 3.0 gf), high tip load wire ( 4.0 gf), high tip load wire ( 4.0 gf), high tip load wire ( 4.0 gf), cto support wire, re entry / support / externilisation wires, re entry / support / externilisation wires, re entry / support / externilisation wires, re entry / support / externilisation wires, re entry / support / externilisation wires, cto speciality balloon, cto speciality balloon, cto speciality balloon, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, workhorse coronary guidewires, ffr guide wires, ffr guide wires, ffr guide wires, ivus / hd ivus catheter, ivus / hd ivus catheter, coronary oct (optical cohorence tomography) catheter, rotational atherectomy(complete set), orbital atherectomy device (complete set), ivl balloon (set), ecg electrodes, ecg electrodes, ecg electrodes - pediatric, j-tip teflon coated wire (0.035), straight tip teflon wire (0.035), straight tip teflon wire (0.032), exchange-length ptfe wire, superstiff / extrastiff wire, hydrophilic wire, support wire

Central Government/Public Sector

CTN :41613074

22 Sep, 2025 NA

Noida - Uttar Pradesh

Tender For procurement of koel da rkit 26 and ard 25 - cgsd (mbi), air starter, da sea water pump / assembly of raw water pump, automatic voltage regulator,, dv electronic governor with over speed protection, set of joints, starting air pressure sensor, hp pipe assembly, speed control unit, temp sensor with inbuild transmitter (type-mbt5560,range 0-150d, outpu, limit switch, turbo oil drain pipe, double gear assembly, 0-2.5 bar danfoss make pressure transmitter for marine, pf33 individual pump, fuel pipe (from tank to feed pump tee) (marine-abs approved), set of o ring, exhaust temprature sensor with 2pin connector, fuel leakage switch, pump to leak off (marine abs approved), leakoff pipe (uniflex), piston assembly, fuel pipe (feed pump tee to filter in marine - abs approved), turning gear engaged limit switch, fuel pipe (from fuel filter to fip) (marine abs approved), centrifugal oil cleaner (band design), assly. rocker lever, oil filter element, k-coolant (26 lit can), small end bush (finished), belt v section (bx 58-pitchl ength 1520), hose reducer elbo, set of copper washers, fuel pipe (tee to pump inlet gear end) (marine abs approved), fuel pipe tee to feed pump gear end (marine abs approved), leak off pipe (from hp pipe to collector)marine _x0013_ abs approved, fuel pipe (tee to feed pump) (marine abs approved), belt for sea water pump drive, water level switch, thermostat element, hose for turbo compressor out, breather pipe, breather hose for marine, elbow connection, cly.head steel gasket 1.2 mm, bend 90 for feed pump out, top piston ring, exhaust valve, leakoff pipe for hp jacketed pipe (lh), drain cock, hose (dia 54) (bet.2 pipes), oil control ring, fuel pipe (tee to pump in), nozzle body (for oil spray nozzle), second ring piston, inlet valve, bolt (bearing cap), make up pipe, fuse terminal block 6a with 2a fuse link, exhaust valve seat insert, connecting rod bolt, rc joint, m.b.cross bolt (short), clamp(for fuel pipe), joint for governor mounting plate, special nut for exhaust manifold, valve seal, counter shunk head screw (for dv injector leakoff), valve guides, exhaust manifold stud, grommet: 22 dia ferrule, rubber bush (bottom), joint (bet.exh.manifold and expa. bellow), s.s.nut, sealing cap (for dia 25), valve collet, sealing cap (40 din 443)8, o ring: drain plug, grommet: 12 dia ferrule, stud-m10x1.5x25-8.8, set screw m8x1.25x25...8.8, washer copper, cup for valve springs, gasket (lub oil header), washer copper (18x22), plain machined washer - m6, service kit for heat exchanger, fuel feed pump, service kit for centrifugal filter, k cool super plus 50-50 premix 26 liter can, k-cool super plus, bearing, bearing, k sealent (80 ml), flat seal for oil seal housing, oil seal for drive end, conical copper washer, spring, cup for pr tube, flexible bellow, sea water outlet pipe from cac, joint for t connection, joint for sea water pump, joint for sea water piping, pipe for he raw water out, roller tappet assly, rubber sleeve, set bolt-m14x2x60-8.8, dowel pin, k cool plus 26 ltrs can, clamp (2 pipe), crank pulley, inlet valve seat semi-finish, exhaust valve seat semi- finish, cup washer (for nozzle clamp), valve guide, oil seal pulley end, timing pointer (for pulley), air shut off valve, set of main bearings, set of thrust washer, set of gasket for heat exchanger ts6m, oil pipe ( crankcase to pump), hose for air starter, sub assembly of bearing housing, joint cooler cover(rh)from fwe, k-coolant (26 ltrs can), copper washer (18x22), k-sealant, wire braided pipe from jacketed leakoff to fuel collector, temperature guage (0-120 deg), rubber bush (top), pressure guage (0-4 bar), pipe(sea water pump outlet to check valve), o-ring for drain plug, npt plug with zinc bar with he, k sealant 80 ml, drain cock, stud, set screw -m8x1.25x25-8.8, hose clip, copper washer, anti vibration mount - cori, anabond 666t max 25g, hose t bolt, hose clamp, rotary drain pump, k sealant (80 ml), automatic voltage regulator, worm drive hose clip (70mm), se

CTN :41407211

10 Sep, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of pvc hose pipes(nylon and wire braided) -general consumables for the stores division

State Government

CTN :41442228

15 Sep, 2025 3.24 Crore

Kota - Rajasthan

Tender For tender for consumable items of neurology intervention cath lab - for the procurement consumable items for neurointervention cath lab, puncture needle for vascular access in adultsfor neuro intervention procedures18 g/20g/22g, short introducer sheeth for adults size 4fr should be 10-11 cm 0.025-to-0.038-inch guidewire compatible kink resistant with dilator hub lock mechanism to prevent its backout during insertion, short introducer sheeth for adults size 5fr should be 10-11 cm 0.025-to-0.038-inch guidewire compatible kink resistant with dilator hub lock mechanism to prevent its backout during insertion, short introducer sheeth for adults size 6fr should be 10-11 cm 0.025-to-0.038-inch guidewire compatible kink resistant with dilator hub lock mechanism to prevent its backout during insertion, short introducer sheeth for adults size 7fr should be 10-24 cm 0.025-to-0.038-inch guidewire compatible kink resistant with dilator hub lock mechanism to prevent its backout during insertion, short introducer sheeth for adults size 8fr should be 10-11 cm 0.025-to-0.038-inch guidewire compatible kink resistant with dilator hub lock mechanism to prevent its backout during insertion, short introducer sheeth for adults size 9fr and above should be 10-11 cm 0.025-to-0.038-inch guidewire compatible kink resistant with dilator hub lock mechanism to prevent its backout during insertion, amplatz catheter: in various standard lengths and curves 035-038 compatible100 cm long, diagnostic cerebral angiography catheterin various standard curves:, vtk, sim 1, sim2, sim 34 french/5 french/6 french sizes and lengths (70cm, 90cm &100cm)., diagnostic cerebral angiography catheterin various standard curves: headhunter4 french/5 french/6 french sizes and lengths (70cm, 90cm &100cm)., diagnostic cerebral angiography catheterin various standard curves: picard4 french/5 french/6 french sizes and lengths (70cm, 90cm &100cm)., diagnostic catheter for spinal angiographyin various standard curves: cobra, rc1, rc24 french/5 french/6 french sizes, hydrophilic diagnostic guide wire type (regular length, regular stiffness) must be available in 0.025, 0.032, 0.035- and 0.038-inches size should have super elastic alloy core should have super flexible wire tip should be available in straight and angled tip should be 140-180 cm long, hydrophilic diagnostic guide wire type (exchange length) must be available in 0.025, 0.032, 0.035- and 0.038-inches size should have super elastic alloy core should have super flexible wire tip should be available in straight and angled tip should be 260-300 cm long, tuohy borst double with side arm (haemostatic double y connector)for co-axial/triaxial systems, tuohy borst with side arm-haemostatic y connector, disposable luer lock syringe should be compitable with cuanoacrylate. should be available in 1 c.c/2c.c/3c.c/5c.c/10 c.c/20 c.c/ 50c.c, pressure saline bag 1000ml, pressure infusion reusable bag 1000ml, long introducer sheeth 80/90/100cm dedicated for neurovascular intervention stainless steel braided should be available in 6fr with 0.088 inch with rounded automatic tip od 0.100 to 0.106, long introducer sheeth 80/90cm dedicated for neurovascular intervention stainless steel braided should be available in 6fr with 0.088 inch with rounded automatic tip, long introducer sheeth 80/90cm dedicated for neurovascular intervention should be available in 6fr with 0.091 inch with rounded automatic tip od 2.77mm distal complaint portion with 14.5 cm flex segment and rounded edges, long introducer sheeth 80/90cm/95cm dedicated for neurovascular intervention stainless steel braided should be available in 7fr with 0.090 inch with rounded automatic tip, long introducer sheeth 80/90cm dedicated for neurovascular intervention stainless steel braided should be available in 8fr with 0.091 inch with rounded automatic tip, guiding catheter for neurovascular intervention size 6fr 0.070,inner lumen length should be 100cm/105cm, guiding catheter for n

Winding Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government