Latest wire drawing machine sale Tenders | Government wire drawing machine sale Tenders

State Government

CTN :43284983

29 Dec, 2025 1.85 Crore

Bengaluru - Karnataka

Tender For suppliers/manufacturers/dealers/contractors for the rated supply and installation of equipment on civil, mechanical, electrical, for the preparation of estimates in ramanagara channapatna hi-tech cocoon market phase-1 in channapatna taluk. - supply and fixing of main lt street light control panel out door type with all accessories.all this electronic circuits componets are assembled in m.s.16 gauge suitable panel cabinet with glass fraonted and locking arrangements including cost of all mateials etc. complete including cost of materials labour usage charges of machinery complete as per specificationscomplete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work., supply and fixing of main lt high mast controle panel out door type with all accessories all this electronic circuits componets are assembled in m.s.16 gauge suitable panel cabinet with glass fraonted and locking arrangements including cost of all mateials etc. complete including cost of materials labour usage charges of machinery complete as per specificationscomplete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work., supply and fixing of powder coated aluminum expansion joint profile sheet for wall 20mm gap size 1.5mm thick x 120mm width complete with all lead and lift, loading and unloading charges as per specifications and as directed by e.i.c of the work, supply and delivery of centrifugal pumpset at site brand new best make and with discharge and duty conforming to isi standards and its latest amendments. capacity 10cumhr at 55 mtr head , supply and delivery of centrifugal pumpset at site brand new best make and with discharge and duty conforming to isi standards and its latest amendments. capacity 10cumhr at 35 mtr head , electrical control panel with all accessories to run the system including incoming mccb individual motor controls with mpcb,indicators, level controls in suction and delivery tanks and suitable provision for automatic water level controller etc. including wiring and earthing etc., complete to make the operation automatic. complete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work. , supplying, fixing testing and commissioning inter unit .sh 80 piping with necessary flanges, bolts, nuts, neoprene gaskets, welding wherever necessary, with necessary control valves, non return valves etc. and with one coat of primer and two coats of approved enamel paint with is recommended color etc., complete to make the operation automatic. complete with all lead and lift, loading and unloading charges as per specification and as directed by the e.i.c. of the work. , supplying fixing testing and commissioning approved make electronic dosing system for dosing chlorine into the treated water with pre set dosage based on the quantity of water. , supplying fixing testing and commissioning approved make water softener with necessary accessories complete with frontal piping valves suitable supports for mounting pressure gauges orifice plates. , supplying fixing testing and commissioning approved make activated carbon filter in ms vessel construction with internals electrical control system complete with frontal piping valves suitable supports for mounting pressure gauge orifice plate etc., supplying fixing testing and commissioning approved make pressure sand filter with necessary accessories complete for auto back wash along with multiport valve suitable supports for mounting pressure gauges orifice plates. the filter shall be made of frp with necessary protective coating. the cost of filter shall also include initial charge of under bed and multi grade filter media to suit the requirement etc., supplying and fixing of treated water pumps duty condition discharge capacity 10 cum. hr. total delivery head 30m no of pumps 1 no. standby pumps 1 nomake kirloskar grundfospump ,

corporations/Associations/Others

CTN :43287647

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 1f and reassembling the dismantled spares in mill 1b - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

corporations/Associations/Others

CTN :43287648

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle mpm i unit i complete dismantling of mill 2f and reassembling the dismantled spares in mill 1c - draining of mill gearbox oil completely, cleaning the gearbox internals like worm shafts and worms wheel. after inspection filling the gearbox with new/old oil including devolution of old oil to stores etc, (department vehicle will be provided for drawl of oil at free of cost)., charges for dismantling the gear coupling bolts, gear coupling (worm shaft only), distance piece, unscrewing the worm shaft extension cover bolts and bearing housing cover bolts, removing the worm shaft extension cover, lowering to ground floor, releasing the worm shaft assembly from its position and assemblies providing back the overhauled worm shaft assembly in the gear box and fitting back the worm shaft extension cover, bolting and tightening the bolts to the required torque level and assembling back the gear coupling bolts, distance piece etc., charges for dismantling the worn out rubber element in the mill motor coupling, cleaning inspection and replacement of new rubber element and checking the tightness of coupling including cost of consumables etc.,, charges for dismantling the spool pieces, multiple port outlet bodies and transition pipes 4 nos. each after assembling the coal pipe inspection with center feed pipe structures., charges for removal of orifice 1 no. after dismantling the victaulic coupling., charges for removal of mill journal doors including lead, lift and transporting of materials fromstores and devolution of scraps from site to stores and cost of consumables such as welding electrodes, gas, cotton waste etc.,, charges for removal of journal with trunnion assembly in the mills including lead, lift and transporting of materials from mill repair bay to mill floor and back, devolution of scrap to stores and cost of consumables such as welding rod, cutting gas, cotton waste etc., charges for changing of bowl extension ring (6 nos) per mill including lead, lift and transporting of materials from stores to mill floor and back, charges for dismantling of lube oil cooler, from lube oil system, cleaning, flushing the cooler, oil pipe lines, water pipe lines, oil separator tank, checking of water lines, valves and nipples., charges for providing wedges between lower skirt and mill insulation cover plate firmly, removal of gearbox bottom cover flange bolts, lowering the thrust bearing and pump housing after supporting lower radial bearing housing. lowering the thrust bearings and reassembling of all the above parts, charges for lifting the vertical shaft along with worm gear and worm wheel from top of the gear box and place it in stand. dismantling the worm wheel hub lock nut and removal of worm wheel from the worm hub by steam/induction heating. inspection of upper redial bearing and renewal if necessary., charges for dismantling and removing worn out thrust bearing of mill vertical shaft by gas heating the racer, cleaning the bearing seating area in the vertical shaft., charges for removing the thrust bearing adopter (worn out) and assembling the new adopter by heating, charges for removal of seperator body along with classifier assembly. inner cone mill outlet plate and venturi dismantling the air inlet housing after segregating from hot air duct placing in appropriate place. dismantling the bowl with bowl hub and separating the bowl hub from bowl and in filling the same., charges for dismantling of upper skirt assembly, lower skirt assembly, mechanical face seal assembly, dust guard and blue matching of seal runner, renewal of seal( bronze), air seal, dismantling of mill bottom cover, upper bearing housing cover, oil seals etc.,, charges for dismantling the triangular liners, cutting the bulged mill bottom plate, applying refractory cement at the mill bottom plate 1 set by providing bolts and welding., charges for dismantling the radial bearing after removing the oil pump hub and oil pump bushing., charges for changin

Central Government And Public Sector

CTN :43312515

15 Jan, 2026 80.68 Lacs

Mumbai - Maharashtra

Tender For renovation and maintenance of hvac and mechanical system at barc hospital, anushaktinagar, mumbai - 400 094.

CTN :43322401

07 Jan, 2026 NA

Pune - Maharashtra

Tender For supply of dglp gem boq 143 x ray consumables d d - 2.4 1.7 f pre shaped tip low profile shaft neuromicrocatheter with 0.0165 inch inner and 0.014 guide wire compatible , stent neuro self expandable braided for intracranial aneurysm neck remodeling with delivery wire and delivery , stentretriever neuro for mechanical thrombectomy non detachable self expandable nitinol based open slit closed cell design , catheter micro dmso compatible with 1.5 f distal od 2.7f proximal od 165 cm length such as marathon , stent carotid self expandable dual layered open cell with outer ptfe mesh such as c guard , polyvinyl alcohol particles 150250 microns , polyvinyl alcohol particles , polyvinyl alcohol particles 350500 microns , polyvinyl alcohol particles 500750 microns , rotating hemostatic valve y connector tuohy borst , percutaneous angioseal vascular access closure system based on intra vascular collagen plug with absorbable suture for 6 fr and 8 fr sheath sizes , hydrophilic coated guide wires suitable for negotiating tortuous vascular anatomy with j curve tip of 0.035 diameter and 150 cms length , guidewire amplatz ultra stiff 0.035 inch diameter 260 cm or more length available , cobra 1 c1 visceral braided torque control catheter 5.0 french 65 cms long permitting , kampe access catheter 5 f 65 cm length , intracranial reperfusion catheter for thrombus aspiration in acute stoke ) /bid number : gem/2025/b/6979718 * /dated: 24-12-2025 & & / bid document 1 / 19

CTN :43304276

02 Jan, 2026 9.31 Lacs

Noida - Uttar Pradesh

Tender For repair maintenance of various electrical and mechanical work services at nssta knowledge park ii gr noida up sh supply and replacement of existing inbuilt water cooler with ro system in hostel and admin building

CTN :43322539

31 Dec, 2025 46.66 Lacs

Amritsar - Punjab

Tender For a) maintenance of electrical installation and fans repair maintenance of pump set dg, fire fighting and fire alarm system at cr building amritsar (pb.) b) maintenance of electrical installation and fans i/c repair maintenance of compound lighting at income tax office taran taran c) maintenance of electrical installation and fans i/c repair maintenance of compound lighting at income tax office building batala d) maintenance of electrical installation and fans i/c repair maintenance of pump set and sub station at lcs attari amritsar (pb.) (sh operation and routine maintenance of electrical and mechanical servicessubwork/packages:operation and routine maintenance of electrical and mechanical services

CTN :43304354

30 Dec, 2025 4.19 Lacs

Darbhanga - Bihar

Tender For 1) armo of specialized electrical and mechanical equipment at ito flats, pedder road, mumbai. 2) armo of specialized electrical and mechanical equipment at darbhanga house, pedder road, mumbai. 3) running and maintenance of specialized electrical and mechanical equipments lifts, fas wet riser, diesel generator set at cr apartments, cassimitha, mumbai. (sh- repairing of fire alarm system and refilling portable type fire extingushers, i/c providing exhaust fans in lift machine room.subwork/packages:repairing of fire alarm system and refilling portable type fire extinguishers, i/c providing exhaust fans in lift machine rooms.

CTN :43322558

31 Dec, 2025 3.52 Lacs

Hyderabad - Telangana

Tender For operation and maintenance of sub-station equipment, dg set, ac units, fire alarm system and passenger lifts at ag ap & telangana, hyderabad during the year 2025-26. sh:- operation & maintenance of all electrical & mechanical services, annual maintenance of specialized services such as 11kv substation, operation of dg set, pump sets, fire alarm system & passenger lift. sh: providing hvls fans in the open auditorium.subwork/packages:sh: providing hvls fans in the open auditorium

corporations/Associations/Others

CTN :42485358

12 Jan, 2026 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

Wire Drawing Machine Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others