Latest wood pole Tenders | Government wood pole Tenders

Central Government/Public Sector

CTN :40447537

27 Jun, 2025 79.9 Thousand

Ernakulam - Kerala

Tender For bid to ras procurement of ars items - cloth calico grey , big polythene eighteen micron , dedoriser , plastic coated file cover , steel wood grade , photocopier paper size , bleaching powder stablised , disinfected fluid black , mop , mop refills , polish metal for polish metal surface , cloth sponge , cloth hessain medium cm wide rot proofed , colth stockmitte , soap liquid toilet , soft soap for oil cutting mixture , torch cell dry aa lechalange , pen torch cell aa , paint rfu interior decks and dadoes green bumswick middle , paint rfu air drying brushing spyaying azure blue isc , water proof bag

CTN :40568018

28 Jun, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of ms rod 30mm dia , ms rod 8mm , ms rod 10mm , ms rod 40mm , ms rod 40 x 5 mm , ms flat 50 x 5mm , aluminium rod 40mm dia , aluminium ingot , welding rod 3 point 15 mm , welding rod 2 point 15 mm , brazing rod , flux borax , welding rod cast iron , gas welding rod , refilling of oxygen gas , refilling of acetylene gas , grinding disc 4 inch , grinding disc 5 inch , standing disc 4 inch 36 grit , standing disc 4 inch 100 grit , standing disc 5 inch 36 grit , standing disc 5 inch 100 grit , cutting wheel 4 inch dia , cutting wheel 5 inch dia , backing pad for sanding disc 5 inch , sanding sleeve 36 grit , sanding sleeve 100 grit , pop up rivet aluminium 3 mm , pop up rivet aluminium 4 mm , pop up rivet aluminium 5 mm , buffing wheel white cloth , buffing cake , cutting wheel 355mm , bentonite powder , parting sand , graphite powder , coal dust , headless nails , suhaga flux , cotton hand gloves , araldite adhesive 200 gm , masking tape 1 inch x 30m , fevicol sh , nails assorted sizes , pvc bidding patti , fevicol heatex , self tapping screw 2 inch , self tapping screw 1 and half inch , soft wood scantling 3 inch x 3inch , emery paper , air compressor hose , paint yellow , paint red , paint black , paint blue , turpentine , touchwood , red oxide primer , resin with hardner , pigment colour 15 gm packet

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830502

11 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall be made up of

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

CTN :40828016

14 Jul, 2025 39.6 Thousand

Leh - Jammu And Kashmir

Tender For supply of bronze flex powder , steel rod , nitrogen gas fill up , soldering wire , soldering flex , cutting wheel 4 , wood cutter blade , cutting disc for hand cutter , dc screw dvr set , insulation tape big size , dry soldering wire , wire stripper , sd matting , nose plier inner outer , pipe wrench 300 mm , drill bit , drift pin steel set 1mm to 10mm , battery clamp , bronze flex powder for gas welding , screw dvr set 16 pcs , ballistic goggle for technicians , drill bit set , drill machine , feviqwik , thread tape

State Government

CTN :40814823

30 Jun, 2025 3.00 Lacs

Parganas - West Bengal

Tender For construction of concrete road with pilling from koraiberia wooden pole to magura swasan via kobor danga 140m at koraiberia sansad i under mathur g p within d h ii p s

corporations/Associations/Others

CTN :40813521

07 Jul, 2025 NA

Amreli - Gujarat

Tender For annual rate contract for supply of water cleaning materials at, various area of savarkundla, (one work will have to be done up to a limit of rs. 5.00 lakh).-, , fenugreek dust. 5%, , fenugreek dust. 25%, , beaching powder 101 grade, , chlorine tablet, , payrethiyam liquid, , alum, , finail black/white, , fino dust 10%, , medicine of fly, , acid, , malaria oil, , melethion liquid, , begon spray, , lime, , foking liquid, , chlorine liquid, , road brush, , 3 feet, , 2 feet, , wood stick, , broom (savrani), , mask, , hand gloss, , gum shocks, , foding maching, , grub hoe, , grub hoe handle, , trickle, , trickle handle, , pan(bowl), , iron rod

CTN :40811537

14 Jul, 2025 1.99 Lacs

Chennai - Tamil Nadu

Tender For supply of wonder tape 2 inch , wiper long handle , wet surface putty , varnish touch wood , tube fluorescent led cfl , torch cell 1point 5v medium size , toilet paper , telephone cable 4 core , teflon tape , tape transparent 2inch , tape transparent 1inch , tape insulation 25 steel grip , super or spin mop refils , steel cleaning liquid , spray hand liquid insecticide , spin mop sep , soap liquid toilet , scrubber with handle , safety gloves cloth , room freshener room spray , refill for automatic air fresher 250 ml , rat sticking gel , quick dry steel putty , polish metal brass , photo copier paper a3 , photo copier paper 210 mm into 325 fs , photo copier paper 210 mm into 27 mm a4 , pest seat hit spray or aerosole spray , pencil cel 1.5 v , paper napkin , paint roller 9 inch , paint roller 7 inch , paint roller 6 inch , paint roller 4 inch , paint brush 4 inch , paint brush 2inch , ncml solution qty for 06 month , ncml solution phosphoric acid qty for 06 month , ncml solution oxalic acid qty for 06 month , ncml solution thiorea qty for 06 month , naphthalene ball , mug plastic , mosquito repellent machine with liquid , m seal , lamp cfl led , jerry cans 20 ltrs plastic , hand wash liquid , hand towel , glass cleaner 500 ml , fiber dust brush , feather broom phool jadu , envelope size 6 into 12 , envelope size 4 into 10 , envelope size 4 into 14 , envelope cloth coated 12 into 16 , envelope cloth coated 10 into 14 , envelope cloth coated 9 into 12 , dvd , duster cloth , dust bin , door mat foot mat mat floor synthetic , distilled water , distemper white , disinfectant fluid white black phenol , detergent powder , deodriser refill for ship head 8 cm 3 cm , cotton waste , cotton rags , corrosion inhibitor , cloth stockinet mutton cloth , cloth sponge , clip jubilee 3inch , cleaning liquid for utensils , cleaning bar for utensils , cleaner white toilet harpic , can plastic10 ltrs , candle wax , brush with long handle , brush sweeping hand , brown sheet laminated , broom country , biodegradable polythene film wich 18inch thick 0 point 007 , battery aa 1 point 5v , bag gunny , biodegradable garbage bag or cash bags , aqua bond , antirust spray , abrasive paper 230 mm into 280mm , abrasive cleaning pad or scrabber pad //bid details 2 / 64

Central Government / Public Sector

CTN :40810059

23 Jul, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply, erection & installation of 't' shaped modular workstation having two keyboard pullou t trays, two cpu trolleys, two storage encase metal pedestals, two ergo footrest and also provided with in tegrated cable management as per specification details mentioned below. 1) two workstations, each shall be of 5 feet( l) x 5 feet (w) x 4 feet(h) and the total combined 't' shaped modular workstation size: 10 feet (l) x 5 feet(w) x 4 feet(h) = 01 set(which is made up of 25 mm hpl/nfc engineered wood & 1 mm acrylic l aminate). 2) all the interconnecting wiring for lan, power supply and telephone wires shall be done inside t he cable management system(powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. 3) standard communication & power accessories :- i) lan rj45 ports : 4 n os ii) telephone rj11 ports : 4 nos iii) power supplies 5 amp. sockets : 6 nos 4) all wires shall be brought ou t to interface boxes as one for power supply and another for the communication cables. these boxes shall be designed to accept connections from the control room circuits. 5) modular workstation material shall con firms to hpl/nfc engineered wood(25mm thickness) or its similar as per epd-ies-0012055 : 002 (s-p-1205 5) certification or latest if any. [ warranty period: 30 months after the date of delivery ]

Wood Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government / Public Sector