Latest wood primer Tenders | Government wood primer Tenders

CTN :39740241

07 Apr, 2025 1.76 Crore

Karnal - Haryana

Tender For strengthening with wbm plus 50mm bm plus 20mm pc and relaying of ccb strengthening with wbm plus 50mm bm plus 20mm pc and relaying of ccb - [10.33.1]providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1. 1:4 (1 cement : 4 coarse sand) [through rate], [10.8]providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 [through rate], [11.25.2]pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 2. raised and cut pointing [through rate], [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [through rate], [11.5.4]12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) [through rate], [11.61.1]white washing with lime to give an even shade : 1. new work (three or more coats) [through rate], [14.23.1]cement pointing 1:2 on lining 1. in bed. [through rate], [17.15.1]granular sub-base with coarse graded material - grading-i or ii or iii (table:- 400-2) construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of mortandh specifications 1. grading i material [through rate], [17.22.2]water bound macadam gr i 2. water bound macadam grading i with screening type a providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications [through rate], [17.23.2]water bound macadam grading - ii 2. water bound macadam (53mm to 22.4 mm)grading ii with screenings type b (11.2 mm aggregates) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical clause 404 of mort&h specifications [through rate], [17.25.1]prime coat @ 0.85kg per sqm 1. prime coat @ 0.60kg per sqm providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per technical clause 503 of mort&h specifications [through rate], [17.26.2]tack coat 2. providing and applying tack coat with penetration grade bitumen vg - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of mort&h specifications [through rate], [17.33.1]open - graded premix surfacing 20 mm thickness 1. providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder vg - 10 @ 1.46 kg per sqm, laid with paver finisher mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of mort&h specifications. [through rate], [17.36.3]seal coat 3. type b with vg - 10 bituminous binder providi

Central Government/Public Sector

CTN :38680871

21 Mar, 2025 23.58 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of dismantling of old worn out wall paneling with frame structure of transmitter hall and technical area, shifting and disposal of dismantled debris material from the outside of the office premises , wall paneling treatment in transmitter hall and technical area , providing, fabrication and fixing of cedar or teak wooden skirting 125mm x 15mm in transmitter hall and technical area , providing, fabrication and fixing of cedar or teak wooden planks 75mm x 15mm in transmitter hall and technical area , dismantling of old worn out false ceiling material with frame structure of transmitter hall and technical area, shifting and disposal of debris material from the outside of the office premises. , providing, fabrication and fixing of false ceiling in transmitter hall and technical area at hpt tv site gurez as per drawings and respective layout drawings. , providing of 600mm x 600mm hinged flap flushed doors and fixing it on the ceiling as per requirement of site at gurez , providing, fabrication, fixing and polishing of wooden table for emergency studio with console table top 25mm thick wooden board or commercial ply with sunmica sheet 1mm thick , providing, fabrication, fixing and polishing of heavy duty wooden workshop table with top made up of 25mm thick wood plank on top and wooden batten frame with wooden beading and moulding , providing and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint at transmitter hall and technical area, after touching on corners etc , providing and applying two coats of wall primer on gypsum false ceiling and walls etc transmitter hall and technical area, after touching on corners, joints and screw heads etc as required , providing and applying two to three coats of water based luxury emulsion on gypsum false ceiling and walls surface , wooden surface to be cleaned and wooden putty to be applied and after rubbing with appropriate sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors , providing and applying of 50mm x 50mm x 12mm wooden cornice as per approved profile at all around false ceiling in transmitter hall and technical area , fixing with complete wiring of 2ft x 2ft recessed mounted led lights , fixing with complete wiring of 1ft x 1ft recessed mounted led lights bid details/ 2 / 22

CTN :39458145

26 Mar, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of thinner cellulose spraying (finishing thinner) as per is 5667-1970( 200 ltrs barrel) , cellulose m/c. lacquer primer surfacer white as per our std. sheet no. l6821a , cellulose nc putty grey is-631 as per our std. sht. l6823 , p. u. putty with hardner, esdee auto coat, polyster putty light weight body filler white soft cut weight , cellulose m/c. laquer primer surfacer grey as per std sheet no. l6821a 1/2, 2/2

CTN :39741150

01 Apr, 2025 NA

Dewas - Madhya Pradesh

Tender For supply of fixing of play equipment in ward n. 03 dewas - items :, 5 htroto wave slideproduct area : 15ft x 3ftsafe area : 21ft x 6ftage group : 4 to 12 yearsspecification : the module is made up of lldpe plastic. the inside dimension of the slide will be 425 mm. the length of the slide will be 2700 mm. this is a double wall slide, having 5-6 mm thickness on each wall. slide modules has internal stiffeners for strength & rigidness. ladder main frame is made up of 25 nb b-class isi make g.i pipe & hand rail of 20 nb b-class isi make g.i. pipe. the platform is made up of 14 swg g.i. sheets with anti-skid for firm foot grip. the triangular steps are of 16 swg g.i. sheets.platform support is made up of 80 nb gi pipe, pull up bar product area : 8.2ft x 0.5ftsafe area : 12.2ft x 1.2ftage group : 12 years and abovestrenghtens shoulder , biceps and core,improves cardio vascularfunction :endulance.specification :main frame:- vertical support is made up of 80 nb b class g.i pipe-jindal make centre frame:- horizontal member is made up of 25 nb b class g.i pipe-jindal make.powder coat done by first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. total thickness is 110-120 micron., half round net climber productarea:11ftx6ftsafearea:17ftx12ftagegroup:3to10yearsspecification: halfroundnettop&bottomframeismadeupof40nbgib-classpipe. sideframe ismadeupof80 nbgib-classpipe. net climberframeismadeupof80nbgib-classpipe.inarchbendingshape. netismadeupof16mmsixstrandedterylenerope. eachstrandisconsistof1.5mmsteelcorewireinterylene bre. fibrecoreofsisal&hempisgivenintheropeforadequate exibility. eachropeendissecuredwithgisleeve16mmcrimpedonbothendoftherope. speciallydesignedgiclampsareweldedonpipeframetoholdropeclamps. speciallydesignednylonclampsandnylonspacersareusedfor xingropewiththemainframe. speciallydesignednylonballclampsareusedforformingropemesh, 5 rainbow climberproductarea:11ftx3ftsafearea:17ftx6ftagegroup:4to12yearsspecification:rainbowclimbermainframeismadeupof25nbgib-classpipe. stepismadeupof20nbgipipe., platform merry go roundproductarea:dia5ftsafearea:dia10ftagegroup:3to10yearsspecification: theplatformofmerrygoroundconsistsofnon-skidtypealuminiumchequeredplateof14swg.theringonwhichthechequeredplateisbasedismadeoutof25nbgipipes. thesupportbelowthechequeredplateisof40 x40 x5and25 x25 x5giangle. thewholestructureismountedonheavy-dutybearingshaftpermanentlylubricatedwithwatersealant. thestandofmerrygoroundplatformismadeoutof80nbgipipes. railingismadeupof20 nbgib-classpipe., deluxe junior see sawproductarea:5.5ftx1.2ftsafearea:12.5ftx5ftagegroup:3to8yearsspecification: seesawleverismadeupof80nbgib-classpipes. leverlengthwillbe1650mmlong. lever endsarecovered withgipipeendcap. twonoofseatismadeupoflldpeplasticwithinbuilthandle. standismadeupof80nbgib-classpipes. twonoofpedestalbearingaregivenforsmoothandnoiselessmovementofseesawlever. bearingiscoveredwithnyloncover., double see sawproductarea:8.5ftx5.2ftsafearea:12.5ftx9.2ftagegroup:3to10yearsspecification: double seesaw leverismade upof50 nbgib-classpipe. seesawstandismadeupof40nbgib-classpipe. fournoofpedestalbearingaregivenforsmoothandnoiselessmovementofseesawlever. bearingarecoveredwithnyloncover. seatismadeupoflldpeplasticinrotomouldingprocess, luxury swingproductarea:9.2ftx6.3ftsafearea:13.2ftx10.3ftagegroup:naspecification: thisluxuryswingcaneasilyaccommodate3adultsatatime. itstoppipeisof50nb,whilethelegsupportsareof40mmnbb-classg.ipipes. it isprovidedwith acorrugatedpvcroof. the seat frameisfabricatedoutof20mmnbb-classg.ipipes whiletheseat ismadeup of7frpstrips. theswingissuspendedwiththehelpofelectro-galvanizedchain8mmthick,whichisassembledwithheavydutyballbearinghousedinspecialcasting., ouble swingproductarea:9ftx6ftsafearea:13ftx13ftagegroup:3to10yearsspecification: topbarismadeupof50nb g.ib-classpipehaving2setsofbearingassembly&profileplateatend. the length of top bar is 2.8m long. junction

CTN :39687167

20 Mar, 2025 NA

Datia - Madhya Pradesh

Tender For establishment of telemedication hub in government medical college datia m.p. - telemedication hub, aio desktop computer system as per specification attached in tender document qty 01, tablet as per specification attached in tender document qty 01, hd camera as per specification attached in tender document qty 01, headset and microphone as per specification attached in tender document qty 01, printer cum scanner as per specification attached in tender document qty 02, furniture as per specification attached in tender document 02, software as per specification attached in tender document, ups microtek as per specification attached in tender document qty 01, air conditioner as per specification attached in tender document qty 01, speaker as per specification attached in tender document qty 04, amplifier as per specification attached in tender document qty 01, mic as per specification attached in tender document qty 02, providing and fixing acoustic wall panelling comprosing 50 mm gi grid base frame, 50mmt thick glass wool installation finished with twelve mm perforated gypsum tiles, joints finished with fibre mesh tape and gypsum compound all complete approx area 400 sqft, providing and fixing 50 mm glass wool insulation (for existing grid of ceiling) approx area 400 sqft, supplying and applying one coat of primer and two coats of emulsion an wall panelling surface approx area 400 sqft

CTN :39730925

08 Apr, 2025 NA

Uttara Kannada - Karnataka

Tender For supply of anti corrosive paint, fresh water tank (n8010- 007652) , international thinner gta220 (n8010- 001549) , anti corrosive paint, avgas/avcat (n8010- 007653) , epoxy based primer for appication in ballast tank (n8010-p009678) , h. p. anticorrosive paint for use under non-skid coat (n8010-007694) , h. p. advanced non-skid coating for helo & flight deck (n8010-007693) , paint polyurethane grey (n8010-007509) , paint polyurethane red (n8010- 007510) , paint finishing (ral 7040) grey (n8010- 007507) , epoxy based anti corr paint for application in ballast tank (n8010-p009679) , anti corrosive llps (grey/bronze) (n8010-p061944) , jotun thinner no 17 (n8010-p063242) , anti corrosive llps (alluminium) (n8010-p061977)

State Government

CTN :39751747

29 Mar, 2025 NA

Murad Nagar - Uttar Pradesh

Tender For providing of professional painting service - painting of 220kv ct juction box of different 220kv bay with one coat of red oxide primer and two coat of selves enameled painting nerolacberger asian paint after proper cleaningremoving of rust dust old paint of all ..

CTN :39711512

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmiya under job no 2502 mmg bkr as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40-63 mm graded , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , water proofing compound confirming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll , cement based paint snowcem make-berger , asian , nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger , asian , nerolac , synthetic paint enamelled brown confirming to is 5-2004 make-berger , asian , nerolac , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger , asian , nerolac , loop holes 1000 x 300 mm make-tata , sail , jsw , ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , ms binding wire tata , sail , jsw , ismb hot rolled ms 125 , 4000mm long make-tata , sail , jsw , ismb hot rolled ms 125 , 1200mm long make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , prefab mild steel door of size 900x1700 , outer frame made out of isa 40x40x6mm and door shutter frmae of isa 35x35x5mm and all stiffner isa 30x30x3mm. steel shall conform to is-800 make-tata , sail , jsw , hdpe sand bag og colour of size 34 inch x 14 inch , mild steel bars of size 6 to 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , preferb folding double sleeping sleeping bunks made of ms columns 65x65x6 mm and ms plate from made of isa 40x40x6mm , hold fast make-tata , sail , jsw as per store list attached , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , nails various size , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , drilled with 2 nos holes for 6 mm dia near one side , air termination single pointed aluminium rod 12 mm dia and 300 mm long , gi pipe 40 mm dia light grade make-jindal , tata , kalinga , gi pipe 20 mm dia light grade make-jindal , tata , kalinga , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt make-presto , polycab , finolex , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3.0 mm , nut and bolts 6 mm dia 30mm long with check nut and washer , charcoal , salt normal , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe make-jindal , tata , kalinga , galvanized iron strip 32 x 6 mm

CTN :39711513

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2506 svl pd with ohp as per store list , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , water proofing compund conforming to is 2645-2003 make-pidilite , dr fixit , fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata , sail , jsw , cement based paint snowcem make-berger , asian , nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched , weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian , berger , neroloc , synthetic paint enamelled og conforming to is 5-2004 make-asian , berger , nerolac , thinner. make-nerolac , berger , asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata , sail , jsw , prefeb mild steel door of size 750x 1800mm double shutter , outer frame made out of isa 40x 40x6mm and door shutter frame make-tata , sail , jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , loop holes 780 x 300 mm make-tata , sail , jsw , loop holes 1000 x 300 mm make-tata , sail , jsw , loop holes 1250 x 300 mm make-tata , sail , jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata , sail , jsw as per store list att , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal , tata , kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings , drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto , polycab , finolex. , charcoal , salt

CTN :39711542

07 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk or dalmia under job no 2504 ags pd as per store list att , stone boulder 9 inch to 12 inch , coarse aggregate 40 to 63mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make- tata , sail , jsw , water proofing compund conforming to is 2645-2003 make-pidilite , dr fixit , fevicol , quick setting compound make-pidiite , quick fix , fevicol , pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll , gi binding wire tata , sail , jsw , cement based paint snowcem make-berger , asian , nerolac , slack lime , painting brush 4 inch isi marked , hdpe sand bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched , weight of the each bag should not be less then 42-45 gms oblique bag , anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian , berger , neroloc , synthetic paint enamelled og conforming to is 5-2004 make-asian , berger , nerolac , thinner make-nerolac , berger , asian , srt 2440 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata , sail , jsw , ismb hot rolled 200x100mm and 4 mtr long make-tata , sail , jsw , prefeb mild steel door of size 750x 1800mm double shutter , outer frame made out of isa 40x 40x6mm and door shutter frame of make-tata , sail , jsw as per store list , mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , loop holes 780 x 300 mm make-tata , sail , jsw , loop holes 1000 x 300 mm make-tata , sail , jsw , loop holes 1250 x 300 mm make-tata , sail , jsw , ventilator steel 600x450 mm will be fabricated using isa 35x35x6mm for outer frame and isa 30x30x3mm make-tata , sail , jsw as per store list , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , air terminal single pointed aluminium rod 12mm dia and 300mm long , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mmas per store list , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make-jindal , tata , kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings , drilled with two nos holes for 6 mm dia near one side , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto , polycab , finolex , charcoal , salt

Wood Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government