Latest wooden cross arm Tenders | Government wooden cross arm Tenders

corporations/Associations/Others

CTN :40851781

10 Jul, 2025 3.11 Lacs

Erode - Tamil Nadu

Tender For supply of 1500nos lt single phase channel cross arm

State Government

CTN :40772511

26 Jun, 2025 9.65 Lacs

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material, design, erection, testing, commissioning for providing s.o.p. to newly constructed residential building at nift campus chebb at kangra under esd no. i hpsebl, kangra. - (a) material/erection of 11/0.4kv,250 kva s/stn., prov.distribution transformer (ordinary), 11/0.4 kv, 250 kva, prov.steel tubular poles (9 m, working load > 200 kgf/m ), prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for incomer line, prov.ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov.x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov.x-arm: [channel iron (100x50x5 mm), length : 2800 mm x 2 nos] for transformer bed, prov.x-arm [channel iron (100x50x5 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (35x35x6 mm), length : (460 ) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov.ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov.go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov.d.o fuse unit, prov.surge arrester, 9 kv station class (porcelain type), prov.discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12kv, 90 kn) including dead end clamps etc.), prov.pipe earthing set, lt distribution panel box with mccb(630a, 50 ka, 3p,1 no) and mccb(250 a, 36ka, 3p, 3 no.), prov.half clamp (m.s. flat 50x6 mm), prov.full clamps (m.s. flat 50x6 mm), prov.nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], aluminium thimble, copper thimble 200 amp, danger plate, prov.barbed wire, prov.energy meter (3-phase,4-wire)dlms compliant 400/5a ct type, prov. aluminium paint., prov.aaac 7/3.15mm conductor for earthing, erection charges complete in all respect, transportation charges complete in all respect, (b)material/erection of 11 kv ht line, prov aaac 7/3.15mm conductor (50mm ) {includes cutting and wastage}, prov. steel tubular poles (9 m, working load > 200 kgf/m ), prov.m.s. c.i.x-arm (1500x100x50x5 mm), long for single pole, prov.m.s a.i x-arm (1800x50x50x6 mm), long for single pole, prov m.s a.i x-arm (50x50x6 mm), length (2x750) mm long for single pole, prov m.s a.i x-arm (50x50x6 mm),length (2x600) mm long for single pole, prov.m.s c. i cross arm (75x40x5 mm), length (2400) mm for g.o switch & d.o fuses, prov.belt set - ms a.i 50x50x6, length [2400 mm x 2 no.] for double pole, prov.x-bracing set - ms a.i 50x50x6, length [2700 mm x 2 no.]for double pole, prov 11 kv pin insulators (porcelain, 12 kv, 10 kn), prov disc insulator ,1 no disc (12 kv, 90 kn) including dead end clamps etc., prov ht earthing set complete, prov double continous earth wire (gi, 8 swg) @ 0.102 kg/m, prov danger plate (250x200x1.6 mm), prov nuts and bolts of various sizeswith flat and spring washers, prov barbed wire, prov aluminium paint, prov.full clamps (m.s. flat 50x6 mm), prov.xerox for chebb s/stn for scada, prov.d.o fuse unit, erection charges of 9 mtr st pole complete in all respect, erection charges of stay set complete in all respect, erection charges of coil earthing complete in all respect, erection charges of g.o. switch complete in all respect, erection charges of sagging aaac 7/3.15mm conductor, sagging of continous earth wire (gi, 8swg) @ 0.102 kg/m complete in all respect, transportation charges complete in all respect, commissioning of a 250 kva dtr plinth and fencing, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds o

CTN :40633387

28 Jun, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

corporations/Associations/Others

CTN :40696590

26 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For enq.no.26-i 25-26 supply of i)lt 3 phase angle cross arm ii)lt 3 phase channel cross arm

Central Government/Public Sector

CTN :40674150

02 Jul, 2025 NA

Abohar - Punjab

Tender For supply of spare parts e e - front axle assy left , front axle assy right , front axle shift fork kit 4by4 , lower arm end right side big joint , steering uj cross lower and upper , right side upper arm bush , both side anker plate dust cover rh and lh , front axle oil seal both side , thrust washer , bush synthetic , bearing and seal assy both side hub , collar fin , gasket 4by4 , mani gear lever kit complete bush , hub cheek nut spacer , windshield water reserve pipe , window motor complete set , starting relay 70 a , ignition relay 70 a , main relay , fuse grip with fuse heavy duty 2 fuse one side , relay grip with really for head light , wheel sensor front left side , relay pin small type , fuse 10 and 15 normal type 05plus05 , fuse 5 and 10and 20 small type 02plus04plus05 , blower ac switch , door lifer switch , tail board lock cover handle , tyre flap complete set , silicon tube black , rubber beading both side body inner , m s sheet 18 swg 4feet by 3feet , assy window winding power regulator rear door lh , rear door outer belt rh , rear door inner belt rh , assy window reg rh power rear , secondary door seal rear rh , rear door glass run upper rh , rear door glass run lower rear , rear door glass run lower front , assy rear door rh with hinges apl req thai , screw grommet , glass channel lh and rh , fuel tank assembly , fuel tank return pipe + /bid number : gem/2025/b/6330669 , /dated: 11-06-2025 ( ( / bid document 1 / 36

corporations/Associations/Others

CTN :40616007

18 Jun, 2025 NA

Tirupattur - Tamil Nadu

Tender For supply of lt three phase channel cross arm

corporations/Associations/Others

CTN :40616008

18 Jun, 2025 NA

Tirupattur - Tamil Nadu

Tender For supply of lt single phase channel cross arm

CTN :40544564

18 Jun, 2025 60.00 Lacs

Baramulla - Jammu And Kashmir

Tender For annual stage contract for supply,carriage up to sub divisional store, unloading etc. of store items required by electric special sub divison tangmarg for the f.y 2025-26 - supply of steel tubular poles of sizes, st pole 11 mtr. long (st-410 sp56), st pole 9 mtr. long (st-410 sp33), st pole 8 mtr. long (st-410 sp15), supply of pcc poles of sizes, pcc pole 9 mtr. long (wl =300 kg), pcc pole 8 mtr. long (wl =250 kg), supply of acsr conductor of sizes, 0.03 acsr conductor (weasel), 0.05 acsr conductor (rabbit), 0.1 acsr conductor (dog), supply of sub-station items, supply of 11 kv link set (post type) of rated capacity 200 amp (polymer type) , supply of 11 kv link set (post type) of rated capacity 200 amp (porcelain type) , supply of 11 kv link set (line type) heavy duty having rated capacity 600 amp (polymer type) , supply of 11 kv link set (line type) heavy duty having rated capacity 600 amp (porcelain type) , supply of 11 kv gang operating, ab switch 3-phase, 3-pole, 200 amp, vertical type comprising of 9 no. insulators, pipes and lock pad etc complete job (polymer type), supply of 11 kv gang operating, ab switch 3-phase, 3-pole, 200 amp, vertical type comprising of 9 no. insulators, pipes and lock pad etc complete job (porcelain type), supply of gapless surge arrestor, 9 kv, 10 ka, lighting arrestor with polymer housing, stn. type (rashtriya, spark or yamuna make), supply of gapless surge arrestor, 9 kv, 10 ka, lighting arresor with porcelain type housing, stn. type (rashtriya, spark or yamuna make), supply of 11 kv horn gap fuse set 3-phase 200 amp (polymer type), supply of 11 kv horn gap fuse set 3-phase 200 amp (porcelain type), supply of g.i.wire no. 8 swg, supply of guy insulators (11 kv), supply of bobin insulators 40 mm, supply of pole collars of 50x8mm galvanized flat iron with galvanized nuts and bolts of sizes, supply of gi barbed wire for anticlimbing, supply of anticlimbing devices, supply of 11 kv danger plate with clamp, supply of galvanized nuts and bolts of sorts, supply of galvanized channel iron cross arm (100x50x6mm), (75x40x6mm) duly fabricated including clamps and galvanized nuts and bolts of sizes with washers of sizes, supply of galvanized angle iron brace (50x50x6mm) of sizes duly fabricated including clamps of different sizes and galvanized nuts and bolts of sizes with washers of sizes, supply of galvanized v cross-arms duly fabricated of size 75x40x6mm channel iron cross arms including clamps of different sizes and galvanized nuts and bolts of sizes with washers of sizes, supply of m.s. channel iron cross arm (100x50x6mm), (75x40x6mm) duly fabricated including clamps and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of m.s. angle iron brace (50x50x6mm) of sizes duly fabricated including clamps of different sizes and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of m.s. v cross-arms duly fabricated of size 75x40x6mm channel iron cross arms including clamps of different sizes and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of f-top fabricated of galvanized channel iron cross arm (75x40x6mm) 1.5 long and of 6 horizontal length including clamps, collars, nuts and bolts complete with washers etc., supply of protection items (dp mcb c-curve series of breaking capacity 15 ka) (schnieder/siemens/legrand make), 6 amp, 10 amp, 16 amp, 25 amp, 32 amp, 40 amp, 63 amp, supply of protection items (tp mcb c-curve series of breaking capacity 15 ka) (schnieder/siemens/legrand make), 16 amp, 25 amp, 32 amp, 40 amp, 63 amp, supply of protection items (tp mccb wih enclosure complete duly fiited over galvanized angle iron stand/frame duly grouted) (schnieder/siemens/legrand/l&t - d sine series make), 32 amp (breaking capacity 25 ka), 40 amp (breaking capacity 25 ka), 63 amp (breaking capacity 25 ka), 100 amp (breaking capacity 25 ka), 160 amp (b

Wooden Cross Arm Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others