Latest wooden podium Tenders | Government wooden podium Tenders

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830502

11 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall be made up of

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

State Government

CTN :40824957

15 Jul, 2025 NA

Delhi - Delhi

Tender For tender for supply of air conditioner , ac pipe installation , ceiling fan , led light , wiring , wiring , wiring , mcb , mcb , db box , socket , switch , modular base and cover plate , pvc conduit , visitor chair , sofa 2 seater , hod table , hod office chairs , office table , office chairs , almirah/ storage cabinet , storage cabinet/ almirah big , dining hall table-s , dining hall table-b , dining hall chair , cushioned chair with backrest and writing desk , classroom table , audio lectern/wooden podium with pa system , wooden door , false ceiling , roller blinds

CTN :40557087

27 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras bid to ras supply of bolt, key wood ruff, adaptor(e3-20-1 by 8), oil seal pilot bearing, kit shim 72.5 odx 65 id (plate xxi c), guide hose lh (plate vi ac), spring torsion, adaptor, kit shim 79.5 od x 72 id (plate xxi c), kit shim 64.5odx 57 id (plate xxi c), rubber pad 30x20x12 (plate iv h), nut 1-1 by 2 inch unf x 27.5 thk, spring steel bush (44.8 odx3), shim, cover battery (plate viii e), cap steering wheel (plate xii f), adaptor 39.5mm long. m by m 1 by 2 inch bsp x 7 by 8 inch sae lvb (, adaptor (plate xiv b), adapter, washer hardened fit under it.2 (jcb super plate , clip worim drive, clip p-clip, 25mm dia (jcb super plate xxi h), bolt banjo, bracket throttle (plate xxiv c), plate sealing (plate xxviii a), seal, washer rebound 16x80x6(plate iii l), key 2.2 mm (plate iv a), seal top ratl window (plate iv t), spacer 50mmx115mmx5.5mm, spacer main shaft seal, screw bleed (plate xxi c), adaptor, hose, baffle pre filter (plate xxx a), hose 400mm (plate xxx b), cap, cover rear steering column (plate xii e), cover steering column front (plate xii e), adaptor 5 by 8 inch bspx1 by 2 inch bsp m m, spacer 50mmx115mmx6.0mm, light number plate, seal door(plate iv u-4), nut rivet m8 (plate iv ao), bolt gr-8.8m12x130 long, spacer (plate v i), bush spring 51.2odx44.8idx70 long, seal, pin boom lock (plate vi v), blanking disc(b4-1-1 by 04), bracket support (jcb super plate xiii p), adapter includes o ring (plate xv c), adapter (plate xv c), spacer 50mm x 115mm x4.5mm, circlip (plate xxi e), dipstick (jcb super plate xxi h), rubber hose 6x12x800 (plate xxiii b), plate master cylinder adapter (plate xxiii c), clip jubille, bracket side panel mounting (plate xxviii b), adaptor lvb (jcb super plate xiii d), mounting rubber, clamp gear lever gaiter (plate x v), ring clamp load (plate x x), adjusting nut, pad wear, lower (plate iii i), pin (plate iii y), mounting bracket fuse (plate iv c), guard hose rh (plate vi e), micro relay change over 12v, micro relay n o 12v, clevis lh thread (plate x d), washer thrust (jcb super plate xii d), adapter g3 by 8a-7 by 8 unf(m)(jcb super plate xiii f), pipe support (jcb super plate xiii p), adaptor (plate xv c), seal(e4-3-5), spacer 50mm x 115 mm x 3.5 mm, spacer lay shaft od 72.5x id 63.5 (plate xxi c), pipe assy 4wd(plate-f5-5-10 by 43), clip 9.5mm dia., pinch type (jcb super plate xxi, thrust washer side gear, needle thrust brg, light interior(c3-10-1), mounting bracket fan (plate iv aj), bush (b3-2-2), liner bearing(ispl sl no-488), knob with switch (plate x v), tee-adaptor, adapter (plate xv c), spacer 50mm x 115mm x4.0mm, plate counter (jcb super plate xxi f), boot air pre cleaner (plate xxvi a), jubilee clip, guide rh (plate vi ac), pad wear, lower fix (plate iii h), plug locking (plate iii i), mounting roof liner assy rear (plate iv f), bush spring 51.2odx44.8idx70 long, hose tank side (jcb super plate xiii h), spacer 50x115x5mm(f1-3-1 by 02), circlip internal (f5-1-30 by 15), seal rear window (plate iv t), guide hose lh (plate vi aa), guide hose rh (plate vi aa), spacer (plate v i), bracket retainer lh (plate iv s), socket mobile charger, cover fuse box (plate iv ae), bush 44.8 idx51.2 odx114 long(os-630), washer spacing (plate v h), plate gauge (plate ix a), reverse horn flasher, shield heat lh(plate x a), shield heat rh (plate x a), plate retainer (jcb super plate xii a), adaptor, adaptor (el-9-13 circuit, auxiliary valve block), hose grease (plate xviii c), seal, nut m30 x 2 static (jcb super plate xviii j), differential nut, spacer main shaft ss750 (plate xxi c), ring seal, connector, benjo(jcb brake system plate g1-1-10), hose hyd oblique oti cooler (plate xxviii a), fuel tank cap (plate iii c), handle lh (ms sl-40), adopter m by m 1 inch bsp, cap side shift stabiliser, nut rivet (plate v b), stainer fuel filter (plate iii c), pin pivot, brake pedal (plate x p), adapter (plate xxi c), adaptor (jcb super plate xiii h), bush(plate-f1-6-1), guard hose lh (plate vi e), clamp, adopter 90

State Government

CTN :40468763

02 Jul, 2025 1.94 Crore

Jodhpur - Rajasthan

Tender For corrigendum : supply of modular table1 , modular table2 , 5 seater sofa , revolving chair1 , revolving chair2 , conference table , modular work station , computer table , wooden podium , center table , office chair , standing case , executive table , 2 seater sofa , 3 seater sofa , cantilever office chair , revolving chair3 , modular table3 , shelving cabinets

Central Government/Public Sector

CTN :40567503

25 Jun, 2025 NA

Medak-T - Telangana

Tender For bid to ras bid to ras corrigendum : supply of hy7790262041_pvc garden hose nb2019 , hy7790262050_pvc garden hose nb25 , hy7810280104_pvc lid for pvc water storage tank with , hy7810313347_pvcbend dia 110mm with door 87.5 degrees , hy7521001346_gvgm nsz 15mm pri 778 cla 1 sw g1 by 2 inch ends , hy7521001354_gvgm nsz 20mm pri 778 cl a sw g 3 by 4 inch f end , hy7810400207_brass ball valve 15mm with internalthrea , hy7810400215_brass ball valve 20mm with internalthrea , hy7882263052_liquid chlorine is 11673 gr 2 , hy5610071194_synthatic enamyl paint ivory colour is , hy5121901461_teak wood 12 by 25x1200 deodar soft , hy7810293265_flush door double leaf size 780x1940x30 , hy5111761110_ply wood 3ply 1840x1220x4 , hy7810106074_pvc single leaf door with single panel , hy7810106082_pvc single leaf door with single panel , hy7810293702_wpc door 570x1920mmx 28 mm , hy7810293710_wpc door 670mm x 1940mm x 28mm

CTN :40794025

11 Jul, 2025 NA

Ananthapur - Andhra Pradesh

Tender For supply of aluminium partition , wooden podium , wall panelling for conference rooms , conference table as per specifications , audio video conferencing system for conference room , library wooden book rack , electrification for modular work stations , digital locker , hostel study table , hostel study chair , glass partition , flooring mat , wall mounted cloth hanger , metal track partition racks , white board

CTN :40770150

10 Jul, 2025 NA

Delhi - Delhi

Tender For supply of living frp hut and toilet block - fibre glass reinforced plastic frp hut 10 to 12 men , double bunk , mattress , fire extinguisher , kero room heater , almirah , water dispenser , rack , tarpaulin , lantern , lightning conductor , field water heating devices , solar street light , repair kit , pegs , 20 w led tube light fitting , bulk head fitting , moduar switch socket , pvc casing and capping , wire single core , star headed screws , mcb 10 to 32 amp sp , elect wire two core , elect wire , ceiling rose , change over switch , electrical and telephone , pvc pipe , cgi sheet , gi pipe , frp iwc , pvc bend , pvc tee , pvc p trap , pvc socket , ppr gate valve , ppr tank connector , ppr elbow , ppr tee , sealing thread , ppr tee reducer , ppr pipe , ppr union , ppr socket , ppr reducer socket , long body bib cock , ppr wall clamp , hdpe or pvc water tank , tank staging , silicon gun machine , silicon tube , reinforced nyloguard , adhesive sr 998 isi mark , drilling machine , mason thread nylon , adjustable spanner , screw driver , screw driving machine , self supporting aluminium step ladder , trawal brick , plier side cutting , phawarh , shovel hand , measuring tape 5mtr retractable , cement , random rubble stone masonry , coarse sand , stone aggregate crushed stone , toilet block , frp and puf foam roof curved shape panel , frp and puf foam wall panels , frp and water proof ply wood , frp door , frp frame with sliding shutter ventilator , 5mtr long 8mm galvanized swr wire , long steel angle iron , neoprene gaskets , bolts nuts and washers , holder pendent , auto rechargable led bulb , mcb , star screw full thread , insulation tape , elect wire single core copper conductor , elect wire two core copper conductor , modular switch piano , mcb box 2 way spn , pvc modular switch board , pvc swr bend , pvc swr bend plain , pvc swr tee , pvc short connection , hdpe water tanks , cp pillar tap , vitreous china wash hand basin , bathroom cabinet with looking mirror , 100mm dia stainless steel grating , ss soap dish holder , barbed wire , laip , hand gloves rubber

Central Government And Public Sector

CTN :40768350

10 Jul, 2025 NA

Bangalore - Karnataka

Tender For supply of electrical materials - 12 modular plate with frame , copper reducer/pin type terminal heavy duty lugs, make:dowel (non insulated) , pvc insulation tapes , glands for flexible conduits , 16a mcb single pole - , cable management system , rcbo (single phase) , modular dummy plate , modular switch , modular switch: (230-240 v, (6)a, i module, i way switch, clip #ype, make: mk (cat no: w264014) or its equivalent, modular socket: (230-240)v, (6-16)a, modular-3 module, 5 pir socket, clip in type, make: mk (cat no: w26424, colour: white) or its equivalent, modular socket: (230-240)v, (6)a, modular-2 module, 3pin/5 grin socket, clip-in type, make: mk (cat no: w26428, colour: white) or its equivalent, 15 mirs steel alloy cable wire puller (spring) for wire puller tool able tugger (1 roll-15 mtrs) make: standard, 8 watt,6500k(cool white), ip20,1800lum round surface mouni, led panel light with electronic driver with <15% thd, 240volts with 2 years warranty with dia 180mm, make: crompton/phillips/wipro/havells, 25mm conduir fixing metal galvanised steel clamp with base spacer har saddle), 52mm conduit fixing metal galvanised steel clamp with base spacer bar saddle), 32mm 165wg ms conduit long solid bend socket type conforming, o isi standard, preferred make: bec or equivalent, way 32 mm dia 16 swg ms conduit inspection unction box-socket type, conforming to isi standards, with st mark for the following sizes, make: b.e.c or its equivalent, inch wood round plate as a support to fix lights, make: standard, "wooden gatta/plugs/dowels for electrical workstake: standardmcb dummy blank plate polycarbonate material suitable for legrand dbs (white colour) plain type (iway) make:legrand/standard3 a-100 a 415 volis ac direct measure 3 phase 4 wire din rail mount digital energy meter with class 1 accuracy and rs485 ommunication port confirming to is standards and iec 61326-1,elf poweredmake: selec, em4m-3p-c20watt 5 step 2 modular fan regulator controller isi marked suitable fo 4k plates of above model, white colour, make: mk model: w2472whiinch metal cutting wheels, circular shape, bore dia 16mm, material: tainless steel, make: bosch, isi standard5mm standard din rail as per en 60715, stainless steel, length", aliminum 25mm ball socket with brass thread hall socket and spring make: standard, aliminum 20mm ball socket with brass thread hall socket and spring make: standard, 22 way copper neutral links with insulated hase for fixing at distribution boards. make: standard, sinch heavy duty pvc round chekka dummy plate, make: standard, msmodudar pvc fr slider box mitable for cable managemem system nd, mk make $26005 front plate, "refered make and model: mk and item. code: nsb4t51msmodular pvc fr slider box suitable for cable management system,k make $26006 front platerefered make and model: mk and item.code: nsb81", modular pvc horizontal surface box suitable for mk front plate $26006, refered make and model: mk and 5800008, row of 14 modular cach row double door flexy distribution boul ip 43 #109 with metal door and mcb mounting din rail and suitable neutral and earth links, prefered make and model: legrand and ekinox flexy db, ox din modular products, cat. no 5077 07, row of 14 modular each row double door flexy distribution boord ip 43 #ik 09 with acrylic door and mcb mounting din rail and suitable neutral and earth links, prefered make and model: legrand and ekinos flexy db, dx din modular products, cat no 5077 11, upply of 2.5sq.mm, 4core, stranded copper conductor, pvc insulated, vc overall sheathed, armoured (flat steel stripwire at armoured) marmoured cable, 1.1kv grade, forfollowing sizes complete as required. the cable shall bear isi certification mark. preferable make:, olycab/havels/finolex/kei, ndustrial combinational box: industrial plug top & socket and, so provision with emply din rail (max. 12 rails) mount for fixing mcb, ip rating: 66/67, standard: conform to iec 60439-1 and ip 6 rated according to iec 60529, as detailed

Wooden Podium Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector