Get complete information related to latest Wooden Primer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wooden Primer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wooden Primer Tenders.
Tender For corrigendum : supply of material 500 bedded medical college jhansi - supply of material, earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, rcc work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inlcuding supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being inlcuded in the item., class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., r.c.c. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:1.5:3 in foundation excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also inclduing supply of all materials, labour & t&p etc. required for proper completion of the work. binding wire cost being included in this item, class-150 half brick work in 1:4 cement and coarse sand mortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including suply and wastage & overlapping.thermo-mechanically treated bars of grade fe-500d or more., 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand), providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angels 40x40x6 mm for diagonal braces, providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., one priming coat & one coat oil distemper on new work inlcuding supply of all materials. labour and t&p etc. required for proper completion of the work, painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work paint to be used should confirm to the i.s.i. no. 103 1950, finishing walls with acrylic smooth exterior paint of required shade: - new work (two or more coat applied @ 1.67 ltr./10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm., kota stone slabs 20 mm thick in risers of steps, skir
Tender For supply of paint, coupling and connected items required for upkeep of electrical and mechanical infrastructure under central zone - supply of synthetic enamel paint in black or chocolate shade, supply of synthetic enamel paint in golden yellow shades, supply of synthetic enamel paint in smoke gray shades, supply of synthetic enamel paint in white shades, supply of red oxide zinc chromate primer, supply of melamine solvent/thinner, supply of gland : 8 mm, 10 mm, 12 mm, supply of manually operated pump for diesel refilling having minimum 4 feet long pipe, handle etc with complete oem accessories, supply of ms hose clamp 150 mm dia, 01 mm thick, ms sheet width 25 mm, complete with suitable size nut /bolts, supply of ms hose clamp 200 mm dia, 01 mm thick, ms sheet width 25 mm, complete with suitable size nut /bolts, supply of 90 degree upvc bend 200 mm for 6 kg-f/cm2, supply of 45 degree upvc bend 200 mm for 6 kg-f/cm2, providing and fixing of m. s. reducer 300 mmx200 mm, 10 mm thick, approx 0.5 mtr length/ required length at site, with suitable size nut, bolt, packing sheet etc. all as directed at site, providing and fixing of m. s. reducer 150 mm x 300 mm, 10 mm thick, approx 0.5 mtr length/ required length at site, with suitable size nut, bolt, packing sheet etc. all as directed at site, pvc green suction hoses (heavy duty) w/p 7 kgf/cm sq. 150 mm in size, supply of m.s. flange with required nut bolts & packing sheet etc complete as required of dia 80 mm (10 mm thickness), supply of m.s. flange with required nut bolts & packing sheet etc complete as required of dia 100 mm (10 mm thickness), supply of m.s. flange with required nut bolts & packing sheet etc complete as required of dia 150 mm (15 mm thickness), supply of m.s. flange with required nut bolts & packing sheet etc complete as required of dia 250 mm ( 20 mm thick), supply of m.s. flange with required nut bolts & packing sheet etc complete as required of dia 350 mm (25 mm thick), supply of m. s. bend with required nut, bolt, packing sheet etc. complete as required of following dia.80 mm dia, c class, short bend, 100 mm dia, c class, short bend, 150 mm, c class, short bend, 250 mm, 8 mm thick, 0.5 mtr long, 350 mm dia, 8 mm thick, 0.75 m long, supply of nut & bolt set with washer 1.5 soot to 4 soot and 2.5 inch to 5 inch long, supply of rubber sheet 8 mm thick, supply of rubber sleeve made out of natural rubber having 6mm thickness, minimum 24.5 cm long suitable for 200 mm dia pvc pipe conforming to is 5282
Tender For bid to ras bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech,acc,jk,dalmiya under job no 2505 as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr.fixit, fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make- berger,asian,nerolac , synthetic paint enamelled og confirming to is 5-2004 make-berger,asian,nerolac , thinner make-nerolac,berger,asian , srt 1840 x 613 x 180 , 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make-tata, sail,jsw , ismb hot rolled ms 200 x 100, 3m make-tata, sail,jsw , ismb hot rolled ms 200 x 100, 2m make-tata, sail,jsw bid number/ & ( * ) : gem/2025/b/6092588 dated/ + : 27-03-2025 bid document/ 3 3 1 / 16
Tender For bid to ras supply of construction material of gun pits - cement and all other specificatioin as per rfp , coarse sand and all other specificatioin as per rfp , coarse aggregate and all other specificatioin as per rfp , stone boulder and all other specificatioin as per rfp , water proofing compound and all other specificatioin as per rfp , hdpe sand bag and all other specificatioin as per rfp , painting brush and all other specificatioin as per rfp , anti corrosive red oxide zinc chromate primer and all other specificatioin as per rfp , synthetic paint and all other specificatioin as per rfp , thinner and all other specificatioin as per rfp , srt and all other specificatioin as per rfp , ismb and all other specificatioin as per rfp
Tender For supply of self screw 2 inch , self screw 2.5 inch , fevicol , varnish , cutter blade 14 inch , paint red , paint yellow , paint og , paint blue , paint golden , paint silver , primer , nails 1 inch , nails 1.5 inch , nails 2 inch , nails 3 inch , nails 4 inch , wooden scantling 2 ft long , bamboo 10 ft long , synthetic sponge , steel blade putty filler , wall putty , thinner , writing brush 10mm , writing brush 12mm , colour dry red , colour dry yellow , colour dry blue , colour dry green , colour dry black , colour dry brown , star screw 1 inch , star screw 2 inch , star screw 2.5 inch , 13 inch cutting blade , 4 inch cutting blade , pvc pipe 2inch 10 ft length , painting brush 1 inch , painting brush 2 inch , painting brush 3 inch , painting brush 4 inch , writing brush 2mm , writing brush 4mm , writing brush 6mm , writing brush 8mm , blade saw 12 inch round
Tender For supply of manufacturing and supplying of stores for rcc cp as per ts. cement,sand,aggregate 20 mm,tmt bar 8mm dia,tmt bar 10mm dia,tmt bar 12mm dia,tmt bar 16mm dia,app membrane,scantling hard wood 3 inch x 3 inch 30 mtr long,pvc pipe 75mm dia,form work for shuttering water proofing plywood,binding wire,nails,water proofing compound,quick setting compound,steel door with frame as per drg attached,bitumen,10mm thick ms plate in one layer,20mm thick ms plate in two layer,ms sheet with frame cover,shreded rubber as per ts,lime,primer for synthetic paint,synthetic enamel paint light brown,synthetic enamel paint medium brown,synthetic enamel paint dark brown,paint brush,welding rod size 3 point 60mm,anti rust paint,welding machine cable in coper conductor 10 sqmm,dazzale plus solar lantern cum led torch as per ts,angle tee 25 x 25mm x 6mm,concrete mixture machine,tile cutter make bosch for cutting of plywood,cut off machine 14 inch chop saw metal cutter heavy duty gco 220,esab annual rate contract 200i igbt single phase welding machine with
Tender For bid to ras supply of tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4feet x 18mm bwr grade , pre fabricated mild steel door size 3000mm x 2400mm as per technical specification , pre fabricated mild steel door of size 1500mm x 1830mm , app bitumen membrane sheet of grade 2504 thickness 3 point 0mm type film size 20mx1m , deck sheet curved shape 1 point 20mm tr 50 , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces as specified , red oxide primer , bitumen 80 oblique 20 grade , hdpe pipe rain water pipe 75mm dia , fire extinguisher a b and c type portable net 2 kg capactiy cylindrical , solar lantern , lighting conductors complete set , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm plus minus 10mm minimum strength 50kg oblique sqcm , 100mm thick interlocking tiles , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse , stone aggregate coarse 20 mm , stone aggregate coarse 40 mm , 02 x skilled labour charge , hesco basket portable as per drawing attached , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle , fish line , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia , rammer earth with handle , picks axes with chiesel and point ends kudali 14 cp , showel square nose 14 gauge blade size 310 x 245mm shaft size 710mm fitted , painting brush 100 mm , synthetic tarpaulin 550 gsm of size 30ft x 30ft green , multipurpose non slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage with two stiffeners , portable ms body needle vibrator machine with power 3 hp to 5 hp petrol engine
Tender For supply of vending machine rolls - thermal paper roll, rate to be quoted per thermal paper roll as per specification in tender documents,excluding gst. monthly requirement of 15000 rolls , to supplied for one year. total of rolls tobe supplied 180000, sky blue alkyd, black alkyd, crystal white alkyd, poly putty polyurethane, i k primer, redoxide primer metal primer, special universial thinner polyurethane, p s gray synthetic enamel, aluminium paints synthetric enamel