Latest zinc coating Tenders | Government zinc coating Tenders

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Central Government/Public Sector

CTN :39572374

15 Mar, 2025 NA

Mandsaur - Madhya Pradesh

Tender For supply of lattice structure -mild steel yield stress e250, zinc coating 610gms per sqm - pgcil mandsaur -new , lattice structure - high tensile steel yield stress e350, zinc coating 610gms per sqm - pgcil mandsaur -new , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil indore - extn , lattice structure - high tensile steel yield stress e350, zinc coating 610gms per sqm - pgcil indore -extn , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil kurawar -new , lattice structure - high tensile steel yield stress e350, zinc coating 610gms per sqm - pgcil kurawar -new , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil mandsaur -extn , lattice structure - high tensile steel yield stress e350, zinc coating 610gms per sqm - pgcil mandsaur -extn , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil ashtha -extn , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil shujalpur -extn , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil barmer-i -new , lattice structure - high tensile steel yield stress e350, zinc coating 610gms per sqm - pgcil barmer-i - new , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil sirohi - extn , lattice structure - high tensile steel yield stress e350, zinc coating 610gms per sqm - pgcil sirohi -extn , lattice structure - mild steel yield stress e250, zinc coating 610gms per sqm - pgcil fatehgarh-iii -extn

CTN :39513489

21 Mar, 2025 NA

Nagpur - Maharashtra

Tender For supply of sitc of pressure monitoring system , pressure relief dampers , medical gas pipeline , laminar air flow , ahu and other accessories. , copper pipe for ahu , vrf outdoor unit , ahu vfd with control panel , ducting , insulation , volume control damper , fire control damper fusible link , ra grill , clean room luminaries , recessed round down light , mirror light , electric switch and socket complete set six module , electric switch and socket complete set three module , electric switch and socket complete set four module , electric switch and socket complete set two module , four square mm copper wire with conduit , twenty five mm ms conduit along with accessories , aluminium armoured cableone hundred twenty sq mm along with cable tray , two and half copper flexible cable three core , ten sq mm copper armoured cable four core along with cable tray , copper armoured cable six sq mm along with cable tray , mccb panel , electrical panel with all accessories , electrical db with all accessories , wall panel system puff , ceiling panel system puff , ups , pvc flooring with self levelling antistatic , dismantling aluminium partion door glazing etc , h type stainless steel handle , tower bolt , brick work , cement plaster , cement based putty , wall painting , hermetically seald siliding door , aluminium work for fixed partition , aluminium work for window and door , glazing in aluminium door window ventilator etc , door closer , reinforced cement concrete work , centering and shuttering including strutting propping etc , steel reinforcement for rcc , mortice latch and lock , vitrified tiles in different sizes , dgu fixing in window , demolishing brick work , painting with synthetic enamel paint , removing dry or oil bound distemper water proofing cement paint , removal and refixing mineral fibre false ceiling tiles , steel work in built up tubular , pre painted galvatume aluminum zinc coating gi based corrugated steel sheet , hermetically seald swing door , sitc of hermetically seald swing door , corner coving

CTN :39533823

22 Mar, 2025 NA

Liluah - West Bengal

Tender For supply of ms split pin, size: 10 x 70 mm to is: 549 with electroplated zinc coating. [ warranty period : 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39503135

13 Mar, 2025 NA

Numaligarh - Assam

Tender For annual rate contract for supply of consumables - teflon tape width:3/4"; length:5 m ., bush size:od-57mm x id-38mm x l-150mm pt, bush size: od-75mm x id-25mm x l-150mm p, bush size: od-75mm x id-50mm x l-150mm p, bush size: od-90mm x id-38mm x l-150mm p, bush-ptfe / dia 32mm x dia 12.5mm x 100, bush-ptfe / dia 38mm x dia 19mm x 100mm, bush-ptfe / dia 50mm x dia 25mm x 100mm, bush-ptfe / dia 57mm x dia 25mm x 100mm, bush-ptfe / dia 57mm x dia 38mm x 100mm, bush-ptfe / dia 63mm x dia 25mm x 100mm, bush-ptfe / dia 63mm x dia 38mm x 100mm, bush-ptfe / dia 75mm x dia 25mm x 100mm, bush-ptfe / dia 75mm x dia 50mm x 100mm, bush-ptfe / dia 90mm x dia 38mm x 100mm, bush-ptfe / dia 90mm x dia 63mm x 100mm, bush-ptfe / dia 95mm x dia 63mm x 100mm, bush-ptfe / dia 100mm x dia 50mm x 100m, bush-ptfe / dia 108mm x dia 63mm x 100m, bush-ptfe / dia 114mm x dia 63mm x 100m, bush-ptfe / dia 125mm x dia 75mm x 100m, bush-ptfe / dia 138mm x dia 89mm x 100m, bush-ptfe / dia 150mm x dia 75mm x 100m, bush-ptfe / dia 150mm x dia 125mm x 100, bush size: od-38 x id-19 x l-150mm ptfe(, bush size: od-45mm x id-25mm x l-150mm p, bush size: od-50mm x id-25mm x l-150mm p, bush size:od-57mm x id-25mm x l-150mm pt, bush size:od-63mm x id-25mm x l-150mm pt, bush size:od-63mm x id-38mm x l-150mm pt, bush size: od-90mm x id-63mm x l-150mm p, bush size: od-95mm x id-63mm x l-150mm p, bush size: od-108mm x id-63mm x l-150mm, bush size: od-125mm x id-75mm x l-150mm, bush size: od-138mm x id-89mm x l-150mm, bush size: od-150mm x id-50mm x l-150mm, ganji cloth(soft quality),1.5 m width., markin cloth (best quality), spec : 100%, cotton waste (best quality with 100% cot, loctite 596300 ml tube>,mk:loctite., silastic rtv 1080300 ml>,mk:dow corning, manila rope. size:1" tested super fine (, diamond lapping compd. gr.3-os-40 in 5gm, 2"(w)x5(l)tapemagicwrapresin impreg.fib, belzona 1111(super-metal); pack:834gm ba, ptfe tape flex-o-seal in 20 m spool, w, audco valve sealant, type: 733 cartridge, audco valve stem packing, stick size:d (, molykote longterm 2 plus speclty grease, loctite 577 in 50 ml tube> mk:loctite i, battery for laser alignment kit, emery paper, gr:120 (si-c waterproof),mk, emery paper, gr:800 (si-c waterproof),mk, emery roll :fine; size: 2" x 50mmk:carbo, emery roll :coarse; size: 1" x 50m; mk:, emery paper; grade 60; water proof silic, emery paper; grade 80; water proof silic, emery paper; grade 100; water proof sili, emery paper 140, size - 12"x12", make:hi, rustolene in 2.5 (or 5) ltrs jar,mk:hard, brush: nylon, width: 1" ., wire rope lubricant in 400-750 ml can, zinc coating wr2500 in 500ml pack., wire mesh,mesh-3;16 swg,1.5m(w),ss316, wire mesh,mesh-7;24 swg,1.5m(w),ss316, thread sealant - octite pst 565, o-ring cord, 1mm, neoprene rubber ., o-ring cord, 2.0mm, neoprene rubber ., o-ring cord, 3.5mm, neoprene rubber ., o-ring cord, 4.0mm, neoprene rubber ., o-ring cord, 6.5mm, neoprene rubber ., solid bar-round, dia25 mm, mat: ss316/co, solid bar-round, dia50 mm, mat: ss316/co, solid bar-round, dia80 mm, mat: en 8/col, solid bar-low carbonsteel, dia 20mm, mat, solid bar-med.carbonsteel, dia 50mm, mat, solid bar-highcarbonsteel, dia 30mm, mat, round bar,dia 25mm mat:aisi 4140, colour, round bar,dia 60mm mat:aisi 4140, colour, electrode ss309 mol,dia.-2.5x350mm, mk.:, electrode ss309 mol,dia-3.15x350mm mk.:a, electrode 6013, size:2.5mm ., electrode 6013, size:3.15mm ., ptfe bush; od 300mm x id 245mm x l140mm, round, 16mm dia., is-2062, gr. a ., round, 20mm dia., is-2062, gr. a ., round, 25mm dia., is-2062, gr. a ., m.s. round 30 mm ., round, 12mm dia., is-2062, gr. a, multipurpose spray adhesive; 475g spray, diamond lapping compd. gr.8-os-40 in 5gm, diamond lapping compd. gr.25-os-30 in 5g, diamond lapping compd. gr.45-os-30 in 5g, diamond lapping compd. gr.60-os-25 in 5g, lapping compound; 2950-h-20, belzona 9611 (es metal); formerly 1291, 3"(w)x9(l)tapemagicwrapresin impreg.fib, 4"(w)x15(l)tapemagic wrapresin impreg.f, belzona 1212 (e-metal); formerl

CTN :39498217

20 Mar, 2025 61.30 Lacs

Bilaspur (Hp) - Himachal Pradesh

Tender For tender for supply of ctvs consumables 20 items - 0.6mm thickness , 5x7.5cm. the brochure containing the necessary details on the dimensions and the material of the fabric has to be submitted. the specification for thickness has to be adhered whereas the length or width can exceed the specified. spr , 150ml capacity of burette cylinder , approx. 30cm length of primary tubing and 25cm of short tubing , total length approx. 55cm , primary tube inner diameter approx. 2.7mm and of short tube 3mm , made of pvc , dehp free , iv site spike should be vented. , sterile. components should not be made of dehp , latex or natural rubber. 50 per box rates to be quoted of box , all sizes (18/20-20/22g). sterile. should have two separate non-communicating lumens. the hub junction should be kink resistant. the catheter should have hydrophilic coating. the proximal lumen should have luer lock hub. latex free. 25 per box , 50 per box rates to be quoted of box , it should have protective cap with prime stop membrane. it should have bacterial retention air vent & air stop- with 15-micron fluid filter in the chamber. it should have medical grade , non-toxic dehp free transparent kink free tubing 180 cm ll. it should have provision of parking space in roller clamp. it should have provision of back check valve. all sizes (16g-24g) , double lumen , non-antibiotic coated , all sizes (4fr-7fr) , sterile , four lumen , non-antibiotic coated , all sizes (5fr-7fr) , 5cm-16cm in length depending upon the size of catheter , sterile , triple lumen , non-antibiotic coated , all sizes (5fr-7fr) , 8cm or 16cm in length depending upon the diameter , sterile , 32 fr , left , sterile , disposable , color coded lumens to distinguish between tracheal and bronchial lumens , latex free , 22mm cap , 22mm corrugated tube 1.6 metres long , 22mm expiratory valve , standard connectors , green tube , 22mm cap , 15mm corrugated tube , 0.42 metres long , expiratory valve , standard connectors , extra circuit adopters , 22mm cap , 10mm corrugated tube , 2 metres long , expiratory valve , standard connectors , extra circuit adopters , details specification in pdf , should have silicon cuff with integrated cuff pressure monitoring ability. , disposable , not made with natural rubber latex , 1.5-1.8m in length , extendable , y-piece detachable , should have leur lock port for gas sampling. , 18gx90mm needles with fixed wings , 7ml lor plastic luer lock syringe , 20g nylon catheter , 0.2 micron flat filter with cap having male luer lock and epidural catheter connector , details specification in pdf , details specification in pdf , details specification in pdf , details specification in pdf

Central Government/Public Sector

CTN :39518771

07 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of prevailing torque type hexagon nuts with non metallic insert to is:7 002- 2018, property class-10 to is: 1367 (part-8)-2020, a3b, with zinc coating as per clause no. 2 of rcf spec. mdts-057, rev-nil. as per following sizes and numbers: m8=16 n os, m10=6 nos, m12=24 nos, m16=56 nos, m20=8 nos, m24=24 nos, m30=8 nos." [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39486380

20 Mar, 2025 NA

Mysore - Karnataka

Tender For supply of galvanized ms flat 40x6 mm confirming to is: 2062, grade designation e-250 (semi killed/ killed) for material, is: 1730 for dimension & is: 1852 for quantity tolerance..length not less than 6m. galvanization shall be done as per rdso specification no. eti/ohe/13(4/8)wi th acs 1 to 4(the weight of the zinc coating to be adopted is 750g/m2). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39441534

15 Mar, 2025 NA

Nagpur - Maharashtra

Tender For supply of galvanised ms flat 40x6 mm confirming to is:2062/2011 or latest grade designation e- 250 (sem-klled/ killed) for material. is:1730 dor dimension & is :1852 for quantity tolerance. length 5 .5 to 13.5 meters. galvanisation may be done as per rdso specification no eti/ohe/13(4/84) with a& c slip no. 1 to 4 or latest. (the weight of the zinc coating to be adopted is 610 g/m2) [ warranty peri od: 30 months after the date of delivery ]

CTN :39298568

04 Mar, 2025 NA

Hyderabad-T - Telangana

Tender For supply of strain gages 0 degree 45 degree 90 degree rosette compatible to ferric steel surface material , strain gages 0 degree 45 degree 90 degree rosette compatible to aluminium surface material , strain gages 0 degree 45 degree 90 degree rosette compatible to composite surface material , strain gages 0 degree 90 degree tee rosette compatible to aluminium surface material , strain gages 0 degree 90 degree tee rosette compatible to composite material , strain gages 0 degree 90 degree tee rosette compatible to titanium material , strain gages uniaxial compatible with aluminium material , strain gages uniaxial compatible with composite material , strain gages uniaxial compatible with ferric steel material , rtd temperature sensor pt1000 , methyl methacrylate two component adhesive 400 grams , mild phosphoric acid conditioner , ammonia based neutralizer , strain gage adhesive kit , flux and rosin solvent kit , silicon conformal coating , protective coating , air drying solvent thinned acrylic , air drying solvent thinned xylene polyurethane , surface cleaning agent degreaser , fiber glass adhesive tape 1 inch h class , high temperature cement kit , high temperature self adhesive sleeve inner dia 3mm , gauge sponge , terminal strips 20 pkt , splicing spool

Zinc Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector