Rupnagar Tenders | Govt. Tender Rupnagar

CTN :43268745

10 Jan, 2026 NA

Rupnagar - Punjab

Tender For supply of line interactive ups with avr (v2)

CTN :43224341

29 Dec, 2025 24.49 Lacs

Rupnagar - Punjab

Tender For annual maintenance of street lights in village sohana, kumbra, ind. area phase 8a and 8b, municipal building, store, cow shelter , dog shelter, night shelter, libraries, community centers and fire bridge in sahibzada ajit singh nagar(mohali).

CTN :43235751

01 Jan, 2026 7.21 Crore

Rupnagar - Punjab

Tender For emergent protection and strengthening by providing boulder stone crated revetment of damaged series of revetment to save nearby abadies agricultural land in village burj, sutlej river

State Government

CTN :43254872

29 Dec, 2025 NA

Rupnagar - Punjab

Tender For supply of copper alloy gate valve for waterworks purpose as per is 778 (q3) , sluice valve for water works purposes (50 to 1200 mm size) (v2) as per is 14846 (q3) , swing check type reflux valves for water works purposes (single door pattern) (v2) as per is 5312 (part1) (q3)

CTN :43228235

29 Dec, 2025 4.87 Lacs

Rupnagar - Punjab

Tender For rough cost estimate for providing and fixing of standing board frames in various park in the limits of municipal corporation , s.a.s nagar

CTN :43222945

02 Jan, 2026 27.03 Lacs

Rupnagar - Punjab

Tender For construction of wbm road baba deep singh nagar ward no. 5

Central Government/Public Sector

CTN :43255956

09 Jan, 2026 NA

Rupnagar - Punjab

Tender For replacement uv lamp for mettler toledo make toc analyzer , kit, replacement inlet filter 5000toc for mettler toledo make toc analyzer

CTN :43220390

24 Dec, 2025 20.00 Lacs

Rupnagar - Punjab

Tender For renovation of research lab no.1 (room no 217) at 1st floor of department of chemistry in p.u. campus, sec-14, chandigarh - supply of furniture/fixture fittings, island laboratory table for overall dimension 4800mm(l)x1500mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) on each side of one drawer & below it twin swing door, 2nosstorage of cabinet of 600mm(l)having a swing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of thelab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 4200mm(l)x750mm(w)x900mm(h)modular table shall consist of 3 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. the body of storage of cabinet should bemade of 0.8mm thick crca ms sheet having double side wall and door should be 16mm to 18mm thick with square edges madeof 1mm thick crca ms sheet. the swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ballslide tetescopic channels. handles of the shutter should be pvc recessed. each storage cabinet sink module should be providedwith base frame made from30x30x1.2mm crca square pipe having nylon adjusters. 3nos reagant rack of 1200mm length shallbe moduler design consisting of bottom frame made of 30x30x1.2 crca square pipe and horizontal 2 stage storage of shelevesof 300mm d and reagant rack heghit shall be 650mm.electrical fitting: 2nos. socket of 5&15 amp should be provided beow the bottom shelf or regent rack. top of the table shall begranite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be roundedoff. drainage pipes and water line provision will be laid down by client., wall side laboratory table for overall dimension 6600mm(l)x750mm(w)x900mm(h)modular table shall consist of 6 nos storage cabinet of 750mm(l) twin swing door, 2nos storage of cabinet of 600mm(l)having aswing door, 2 nos sink unit pp sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with lockingfacility. the body of storage of cabinet should be made of 0.8mm thick crca ms sheet havingdouble side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick crca ms sheet. the swingdoor should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. handles of theshutter should be pvc recessed. each storage cabinet sink module should be provided with base frame madefrom30x30x1.2mm crca square pipe having nylon adjusters. the thickness of granite shall be 18mm if required at site., wall side laboratory table for overall dimension 2400mm(l)x750mm(w)x900mm(h)modular table shall consist of 2 nos storage cabinet of 750mm(l) of one drawer & below it twin swing door, storage cabinets ofthe lab table shall be provided with locking facility. or equi

CTN :43206377

30 Dec, 2025 NA

Rupnagar - Punjab

Tender For e.i for setting up of work station system in the audit branch of administrative office in p.u campus, sector-14, chandigarh - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls/hffr pvc insulated copper conductor single core cable etc. as required (dsr 1.8), group c (dsr 1.8.3), rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable and 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required (dsr 1.15), group c (dsr 1.15.3), supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required (dsr 1.17), 3 x 2.5 sq. mm (dsr 1.17.12), 3 x 4 sq. mm (dsr 1.17.21), supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required (dsr 1.21), 25mm (dsr 1.21.2), supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required (dsr 1.22), 75 mm x 75 mm x 60 mm deep (dsr 1.22.1), supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (dsr 1.24), 5/6 a switch (dsr 1.24.1), 3 pin 5/6 a socket outlet (dsr 1.24.4), supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. (dsr 1.28), 3 module (dsr 1.28.2), 6 module (dsr 1.28.4), 8 module (dsr 1.28.5), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required (dsr 1.31), supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required (dsr 1.32), supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (dsr 2.4), 4 way (4 + 12), double door (dsr 2.4.1), supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.(dsr 2.10), single pole (dsr 2.10.1), supplying and fixing dp sheet steel enclosure on surface/ recess along with 25/32 a 240 v "c" curve dp mcb complete with connections, testing and commissioning etc. as required. (dsr 2.16, providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (dsr 5.18), supplying, drawing, installation, testing and commissioning of cat6a utp 4 pair, 23 awg solid copper cable in existing conduit/ on surface, u/ftp, lszh, non-plenum, horizontal (solid) cable suitable for high speed data networking application supporting upto 10gbps over a 100 meter channel. the 4 unshielded twisted pairs (utp) cable with color coded insulation for easy indentification should have flame properties i.e. flammability test - iec 60332-1, smoke density - iec 61034, lszh standards compliance: ansi/tia- 568 c.2, iso/iec 11801

State Government

CTN :43271285

05 Jan, 2026 53.85 Lacs

Rupnagar - Punjab

Tender For techno financial independent third party audit of special repairs under the repair programm of the rural link roads of shri anandpur sahib under the market committee of distt roop nagar for the year 2022 23 2023 24 and 2024 25

Rupnagar Punjab Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government