Acrylic Sheet Tenders

Central Government/Public Sector

CTN :39402247

12 Mar, 2025 19.30 Lacs

Kolkata - West Bengal

Tender For supply of supplying , fitting and fixing of aluminium fixed partion wall of all aluminium sections refer to sl no 1 of boq in the technical specification , supplying bubble free float glass of approved make and brand conforming refer to sl no 2 of boq in the technical specification , providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming refer to sl no 3 of boq in the technical specification , upvc door work providing and fixing of factory made upvc sliding door refer to sl no 4 of boq in the technical specification , extra for providing and fixing insulated 24 mm double glaze unit with 8mm air gap refer to sl no 5 of boq in the technical specification , supplying aluminium casted body hydraulic door closer as per isi refer to sl no 6 of boq in the technical specification , supplying 125mm dia acrylic handle for alumium door as per approved make and brand natural colour refer to sl no 7 of boq in the technical specification , supplying 4 lever mortice lock or any approved make and brand as per direction of the engineer- in - charge refer to sl no 8 of boq in the technical specification , anodised aluminium barrel or tower or socket bolt full covered of approved manufactured from extruded refer to sl no 9 of boq in the technical specificatio , supplying and fixing top hung wooden foldable partition panels with waterproof flush door 32 mm thick refer to sl no 10 of boq in the technical specification

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

State Government

CTN :39410303

27 Feb, 2025 2.40 Lacs

Kota - Rajasthan

Tender For supply of practical equipment in lab of drawing and painting deptt.-, canvas, , lino sheet, , lino ink (black), , lino ink (red), , lino ink (blue), , ink color (yellow), , turpentine oil, , linseed oil, , wood carving set, , lino tools kit, , gesso black, , gesso white, , brushes (round), , brushes (flat), , brushes (flat), , brushes (angular), , flat brushes, , 2 inches, , 3 inches, , 5 inches, , brushes (oil), brushes koma (acrylic), , colour palette (plate), , (1) wells, , (ii) glossy, , (iii) premium glossy, , artist oil colour, , artist oil colour, artist water colour, , artist acrylic colour, , artist acrylic colour, , oil sheet paper, , charcoal, , charcoal, , drapery cotton cloth (blue, orange, brown, grey, green), , drapery satin cloth (pink, magenta, yellow, green, badami), , bed felt for lino machine, , cartridge sheet (off-white), , drawing board clip, , thumb pin, , professional paper cutter, , pencil, , staple gun, , pin for staple gun, , md.f. board, , size 8"x10", , rubber roller, , rubber roller, , glass for table top (for ink rolling), , spatula palette (knives), , spatula palette (knives), , binder clips, , binder clips, , handmade paper (wate, , colour paper)

State Government

CTN :39359769

08 Mar, 2025 NA

Patiala - Punjab

Tender For purchase of dental material - 10% hydroflouric acid, 26 gauze needles pkt of 100, access opening diamond bur kit - round, access opening diamond bur kit- endo z, access opening diamond bur kit- round end tapered, acrylic crown polycarbonate crown, addition silicone (putty), articane 4%, povidine iodine 5% 500 ml, bio ceramic scaler, bioceramic sealer, biodentin capsules, bleaching agent, boxing wax, bp blade no. 11 pkt of 100, bp blade no. 12 pkt of 100, bp blade no. 15 pkt of 100, butane gas cylinder, cal(oh)2 base + catalyst paste, chlorhexidine mouth wash 0.2% 500 ml, chromostat vial, coe pack 90 gm regular set, gtr membrane, composite finishing kit, composite polishing disc, condensation silicone (putty), cotton roll 500 gm, diamond cutting disc, die spacer, disinfectant solution for hands 500 ml, disposable face mask 3 layer pkt of 100, disposable suction tips pkt of 100, disposable syringe 2ml pkt of 100, disposable syringes 5 ml pkt of 100, distal water 5 ltrs, endodontic ultra sonic tips, endofrost, eugenol liquid bottle 110 gm, examination gloves pkt of 100 (medium size), examination gloves pkt of 100 (small size), fibreglue bio adhesive, flowable composite, flowable composite syringe a1, flowable composite syringe a2, flowable composite syringe b1, flowable composite syringe b2, formalin liquid 200 ml 34%- 38%, green inlay wax, gutta purcha catrige, heamostatic gel, hybrid composite, insulin syringe, jet bite, light body addition silicone, light body condensation silicone, liquid edta 17% 60 ml, local anesthetic spray 100 gm, local anesthisia with adernaline 2%, metal cutting diamond disc, mouth mirror top, normal saline 500 ml, optrastick, vaccum container red vials, polishing felt cone, polysthylene woven fibre ribbon, pop 1 kg, porcelain adjustment kit, reprosil regular body, retractioncord 00, retractioncord 000, ribbond, rvg sensor covers per kg, sand paper, sanitizer 500 ml, antiseptic solution 500 ml, needles 30 gauge pkt of 100, silane coupling agent, spirit 500 ml, sterile gauze, surgical gloves 6.5 pkt of 25 pairs, surgical gloves 7 pkt of 25 pairs, surgical gloves 7.5 pkt of 25 pairs, surgical suture silk 3.0 pkt of 12, surgical suture silk 4.0 pkt of 12, suture material vicryl 4.0 pkt fo 12, petrolium jelly without perfume 500 gm, zinc phosphate cement

CTN :38916861

27 Feb, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of engineering allowance items (permanent) for grse p17a project, yard nos. 3022-24 - stop watch profle qurtz 1/100 split dig., snapon t60k thread measurement kit, gauge thread set no.1_detrmng no., sprg dividr 1 ea of 600mm&6"&200mm of 8", laboratory analysis kit, laboratory water_checking fuel&lub oil, tachometer {snap on part no eedmtach1a}, lo test kit visco comprator wtr containt, heay duty 10 ton flat hydraulic jack., euroclean wet&dry duty cleanig industrl, video camera handycam, ultrasonic cleaning machine, 6 ton- general puller -j4289b, hose impermable_instantaneous coupling, height gauge for measuring & ting, heavy duty 5 ton flat hydraulic jack., light weight oxy-fuel weldg,cutg&brzg kt, bicycle, power hacksaw hand held_variable speed, multipurpose photocopy machine, a3 size lamination machine, a3 size spiral binding machine dsd, container rubber for distilled water 35l, table fan sweep 300mm, speed 1250mm, industrial shredding machine, calculator {gem id:5116877-93240287959}, flange less coupling (each type), 3/8" bsp pr. gauge_dial 100mm_1to1.5 bar, 3/8" bsp pr. gauge_dial 100mm_0to2.5 bar, 3/8" bsp pr. gauge_dial 100mm_0 to 4 bar, portable exhaust fan, aluminium extending ladder, 3/8" bsp pr. gauge_dial 100mm_1 to 6 bar, 1st of all req. end fitg_fuel,avcat hose, impeller extractor, 3/8" bsp pr. gauge_dial 100mm_1to250 bar, 1/4" ssp pr. gauge_dial 63mm_0 to40 bar, 1/4" ssp pr. gauge_dial 63mm_0 to160 bar, 1/4" ssp pr. gauge_dial 63mm_0 to250 bar, whiteboard for training 6'x4', whiteboard for training 4'x3', viscosity gauge, notice board_sliding glass door 8' x 6', notice board with sliding door 6' x 4', torches (big) maglite - fenix flashlight, torches- nicron b71 pro 950 lumen, hacksaw (adjustable), set of adjustable spanners( 6",10",12"), set of adjustable spanners (4", 15"), set of pipe wrench (6", 1 0", 15"), set of forged, milled and heat treated f, batiery for torches, brush paint 1 ", snap on tools, block traveller steel switch_1.5 ton, cylindr_gas nitrogen capacity - 46.7 ltr, brady bmp21-plus-kit1 printer kit, ethernet cable cat 5e, acrylic covers for ipms mfcs and gt lcc, victorinox swiss tool spirit xc, shuban adj. waist belt bag multi-pockets, stanley nylon fatmax pro tool vest, hdmi, vga convertor cables, serial to usb convertor/ cables, wireless keyboard, mouse, pointer set, extension boards/ spike guards, panasonic kx- tg38215xb 2.4 ghz, soldering iron and hot air gun, electronic components for pcb repairs, metra vi rps-3005 dc regultd powr suply, sennheiser pro audio ew 112p g4 a omni, dragon touch classic 15 digitl pic frame, 1 star direct cool single door ref. 99l, lg 32 l charcoal convectn microwave oven, coffee tea vending machine_3 years amc, cold repair compound, heavy -duty halogen torch - pair, dewalt dwst1-71196 -portable deck trolly, micrometr_measurg ext. dimension,r-25-50, micromtr_measurg ext.dimension,r-150-175, portble clibrtion eq. ctrl instrumntaton, stop watch profle qurtz 1/100 split dig., snapon t60k thread measurement kit, gauge thread set no.1_detrmng no., sprg dividr 1 ea of 600mm&6"&200mm of 8", laboratory analysis kit, laboratory water_checking fuel&lub oil, power hacksaw hand held_variable speed, bicycle, light weight oxy-fuel weldg,cutg&brzg kt, heavy duty 5 ton flat hydraulic jack., height gauge for measuring & ting, hose impermable_instantaneous coupling, 6 ton- general puller -j4289b, ultrasonic cleaning machine, video camera handycam, euroclean wet&dry duty cleanig industrl, heay duty 10 ton flat hydraulic jack., lo test kit visco comprator wtr containt, tachometer {snap on part no eedmtach1a}, multipurpose photocopy machine, a3 size lamination machine, a3 size spiral binding machine dsd, container rubber for distilled water 35l, table fan sweep 300mm, speed 1250mm, industrial shredding machine, calculator {gem id:5116877-93240287959}, flange less coupling (each type), 3/8" bsp pr. gauge_dial 100mm_1

CTN :39418984

13 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of logo unit golden colour , logo unit on garden stone , fiber sheet board , plate acrylic sheet , steel plate with name plate , letter cutting bar wall , plywood mech sprit and memento corner , cotton check table cloth , jhallar

CTN :39419727

13 Mar, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of acrylic sheet , acp sheet , framing pipe ss structural , retro , radium letter , civil work

CTN :39402903

12 Mar, 2025 NA

Gurdaspur - Punjab

Tender For supply of elevation acp sheet size four x twelve feet , acrylic letters two hundred fifty seven x one hundred thirty inch , regiment logo acrylic size four x four feet , gorkha hat acrylic logo size four x five feet , translights world map board size five point five x four point eight feet

CTN :39402932

12 Mar, 2025 NA

Gurdaspur - Punjab

Tender For supply of regiment history acrylic boards size five x three feet , main gate quarter guards backlight boards eight x six feet , metal letter boards size five x three feet , star flex boards with iron frames size eight x six feet , regiment logo acrylic to acrylic cutting boards

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government