Airtransport Tenders

State Government

CTN :43191712

19 Jan, 2026 50.00 Lacs

Jaipur - Rajasthan

Tender For supply of miscellaneous items for anesthesia department (as per annexure-5) - 01 sga - i gelit should have non-inflatable, gel-like supraglottic airway device for maintaining an open airway, standard 15mm connector, an integrated bite block to prevent airway occlusion, a gastric channel for early regurgitation warning and suctioning, a buccal cavity stabilizer for easier insertion, and an epiglottis rest to prevent obstructionsize:- 1,1.5,2.0,2.5,3.0,4.0,5.0, intubating lma the lma should be sterile, phthalate free, 100 % silicone material, the lma should have a dynamic curve & atraumatic cuff that creates an effective oropharyngeal seal.the lma should have integrated manometer for continuous cuff pressure monitoring, recommend max. intracuff pressure of 60 cm h2o ,allow direct intubation with dual gastric drainage channel , an integrated bite block and must be mr safe , having intubating ability of et tube size ranging from 6.5 to 7.5 mm, dual gastric channel access to manage sudden gastridisection& 10 degree inclination .size:- 3,4,5, combined spinal & epidural set latex free disposable pencil point spinal needle 27g, 127.5 mm with grooved transparent hub with centering protective plastic sleeve, touhy needle with black eye - 18 g (1.3 x 88 mm). protrusion of spinal needle through the back eye of the epidural needle. with epidural catheter, filter, loss of resistance syringe and separate locking device -, epidural full set with catheter having 3 pairs of holes.latex free continuous epidural anesthesia kit containing g18/g16 epidural touhy needle with large crystal clear grooved transparent hub & epidural catheter of g20 /g 19 & length 100 cm. with catheter connector. epidural catheter in the kit is made of 2 layers - inner layer of polyamide & outer layer of polyurethane. epidural catheter has an atraumatic tip design - the catheter has a tapering tip up to 4 cm & 3 pairs of laser drilled holes for distribution of drug. the epidural catheter has graduation markings up to 25 cm & has smudge marking between 11 & 12 cm markings to indicate the position of the catheter tip in the epidural needle & also has a marking at the distal end for catheter connector. the kit also has a small compact ergonomic 0.2 micron epidural filter with pressure resistance of 7 bars. 10 ml loss of resistance syringe with leur slip and parabolic graduation markings., insulated echogenic needle with integrated extension tubing for nerve blocktransparent insulated (teflon coated) needles with depth markings for ultrasound compatibility of these lengths 25 mm (24g), 50mm (22g), 100mm (21g), 150mm (20g). the hub of the needle has an inbuilt cable for connecting to the stimulator & a tubing for injection of the drug by immobile needle technique, all sizes, 20 to 24 gauge with all size (25 to 150mm), pencil point needle (with introducer)pencil point spinal needle with introducer all sizes, agt tracheal tube cuff oral / pre formed south pole tube cuffed oral, 1 eye sizes: i.d. 3.5 9.0 mm semi-seated connector, cupped atraumatic tip, continuous x-ray marker, graduated, low-pressure cuff, blue pilot balloon, valve for luer and luer-lock syringes latex-free sterile ce and usfda approved, agt tracheal tube cuff nasal / pre formed south pole tube cuffed nasal only, 1 eye sizes: i.d. 3.5 8.0 mm semi-seated connector, cupped atraumatic tip, continuous x-ray marker, graduated, low-pressure cuff, blue pilot balloon, valve for luer and luer lock syringes latex-free sterile ce and usfda approved, inj. etomidate 10 ml, inj. sugammadex 2 ml, inj. sugammadex 5 ml, inj. rocuronium 5 ml, pct ( percutaneous tracheostomy tube) with forcefpercutaneous tracheostomy kit with guidewire, dilators, introducer needle, forceps, tracheostomy tube, syringe, scalpel, cannula, : eo (ethylene oxide) sterilizedsuitable for adult and pediatric patients (varies by size)medical-grade polymer and stainless steel (for metallic components)size:- 7.0 , 7

Central Government/Public Sector

CTN :43392705

15 Jan, 2026 NA

Koderma - Jharkhand

Tender For etc of boiler and power cycle piping at 2x800 mw dvc koderma tpp stage-ii - koderma- etc of boiler including pcp, total price for entire scope of work as per tender no.: bhel/cpc/kod/blr_pcp/26/076 for section-i of package-a: unit # 1 - erection, testing, commissioning, trial operation & handing over of boiler and its auxiliaries including pressure part, non-pressure parts, power cycle piping, duct dampers and its support structure, rotating equipment, air pre-heaters, id/fd/pa fans, mills, refractory, etc including handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, ndt, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling etc., at 2x800 mw dvc koderma tpp stage-ii.

CTN :42426637

08 Jan, 2026 NA

Indore - Madhya Pradesh

Tender For bid to ras corrigendum : supply of drone or unmanned aerial vehicle with customized payload (defence forces - navy, army and air force) (q2)

CTN :42933448

08 Jan, 2026 NA

Ahmednagar - Maharashtra

Tender For bid to ras corrigendum : supply of drone or unmanned aerial vehicle with customized payload (defence forces - navy, army and air force) (q2)

CTN :43290934

16 Jan, 2026 10.20 Lacs

Surat - Gujarat

Tender For corrigendum : supply of list of books f f - sensing and gis , soft computing with matlab programming , gate 2026 civil engineering book , engineering material , highway engineering , airport planning and design , transportation engg , environmental engineering sewage waste disposal and air pollution engineering vol2 , hydrology and water resoureses engg , traffic engineering and transport planning , construction engineering management of projects , transportation engineering , disaster management , modern project management , building materials , basic civil engg , environmental engg1 water supply engg , environmental engineering 2 waste water engg , ground improvement techniques , project planning control with pert cpm , practical construction contract issues which are not commonly understood , infrastructure and contract management 2nd edition 2024 , infrastructure engineering management , iot and smart cities , disaster management act 2005 , project management cpm, pert gertscheduling with linear programming , guide to rera with rera check lists by taxmann gujarat rera manual , law relating to tenders and government contracts , irrigation engineering , indian constitution , surveying vol i , surveying vol ii , surveying vol iii , building planning designing and scheduling , digital principles and applications , a first course in artificial intelligence , integrated electronics , cmos digital integrated circuits analysis and design design of analog cmos integrated circuits , introduction to robotics , engineering circuit analysis , introductory circuit analysis electronic devices and circuit theory 11e , computer networking and the internet computer networks and internets 6e , arm system on chip architecture 2nd edition , basic vlsi design , signals and systems , automation, production systems, and computer integrated manufacturing 5th edition , internet of things an indian adaptation concepts and applications , machine learning with python , communication systems , an introduction to analog and digital communications , linear circuits analysis , electronic devices and circuits , gate 2026 electronics engineering previous year solved papers , isro drdo bsnl previous years solved papers of electronics engineering , a handbook on electronics engineering , an introduction to internet of things connecting devices edge gateway and cloud with applications , industrial automation and robotics 2nd edition , introduction to the constitution of india , the constitution of india , thermodynamics basics and applied thermodynamics , principles of materials science and engineering , fundamentals of finite element analysis , shigleys mechanical engineering design , engineering thermodynamics , manufacturing technology vol1 5th edition , design of machine elements , machine design data book , oil hydraulic systems-principles and maintanance , fluid mechanics 9th edition , engineering fundamentals of the of internal combustion engine , materials science and metallurgy , manufacturing engineering and technology , fluid mechanics an introduction 3rd ed , fluid power with applications , callisters material science and engineering , project management , quality management , fluid mechanics and machinery , fluid mechanics , gate mechanical engineering , welding engineering and technology , industrial safety health and environment management systems by , automobile mechanics , fluid machinery , engineering mechanics , shortcuts in reasoning //bid details2 / 163verbal nonverbal analytical critical for competitive exams , general quantitative aptitude for competitive exams , oil hydraulics and pneumatics , project management cpm pert gert scheduling with linear programming , general knowledge , how to crack test of reasoning , a new approach to reasoning verbal non verbal , mechanical system design , hydraulic and fluid mechanics , fluid mechanics hydraulics and hydraulic machines , environmental engineering fundamentals sustainability design 3rd ed

CTN :43467883

20 Jan, 2026 NA

Howrah - West Bengal

Tender For supply of laryngeal mask airway, size 2.5, 3, 4, 5specification:1. it should be a 2nd generation supraglottic airway device.(lma)2. it should be anatomically curved for rapid placement & long-term performance.3. it should be designed to reduce dead space by up to 39%.4. the thin cuff should maintain high seal pressure of up to 40 cmh20.5. it should provide maximum intra-cuff pressure of up to 60 cmh20.6. it should have integrated gastric access channel for managing gastric content.7. it should allow placement of maximum 16 fr of gastric tube through the channel.8. it should have intubation capability using standard et-tubes.9. it should allow placement of maximum 8.0 et tube through the airway.10. should have integrated bite absorption area to prevent airway occlusion.11. cuff and airway tube should be moulded as a single unit for safety %u2013 no separation.12. it should have navigation marks for guiding flexible scope during intubation.13. the pilot balloon should provide mask size & tactile indication of degree of inflation.14. it should have 15 mm (iso- international standard) airway connector.15. it should be made of 100% phthalate free & latex free medical graded material.16. it should be mr safe.17. it should be disposable, eliminating chances of cross contamination.18. should be available in all standard sizes 3(30-50kg), 4 (50-70kg), 5(70-100kg) to accommodate specific age group of patients.19. should be us fda, iso certified for quality assurance20. size 3 -2, size 4 -4, size 5-421. brochure to be uploaded with the offer.

CTN :43466180

19 Jan, 2026 1.02 Lacs

Nagpur - Maharashtra

Tender For providing of bio medical waste management service - per bed basis - collection, lifting, transportation, treatment, disposal, documentation and reporting; station medicare centre, air force station sonegaon, nagpur; polycarbonate jars, white puncture proof contai..

CTN :43464509

12 Jan, 2026 2.00 Lacs

Mumbai - Maharashtra

Tender For providing of goods and transport service for over dimensional cargo (odc) - transportation of ldl airmarrel from vizag to mumbai for flight handling purpose; any suitable trick or trailer; any suitable trick or trailer; outside state; more than 1000 kms