Get complete information related to latest Brush Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Brush Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Brush Tenders.
Tender For supply of carbon brushes for cgl make traction motor model no. tm2141c. part no. 762231506 or eq uivalent required for spic rail car. [ warranty period: 30 months after the date of delivery ]
Tender For supply of brushes, paints & varnishes, flat size: 50 mm conforming to is: 384 (part %u2013 1) % u2013 2012 (sixth revision) with amendment 1 of 2014 and 2 of 2020, having the bristles & the solid dressing of the bristles as per is: 1844-1993 (second revision) with amendment 1 of 2021. [ warrant y period: 30 months after the date of delivery ]
Tender For supply of brushes, paints & varnishes, flat size: 50 mm conforming to is: 384 (part %u2013 1) % u2013 2012 (sixth revision) with amendment 1 of 2014 and 2 of 2020, having the bristles & the solid dressing of the bristles as per is: 1844-1993 (second revision) with amendment 1 of 2021. [ warrant y period: 30 months after the date of delivery ]
Tender For supply of auto electrical spares for locomotives, wheel loader and bull dozers at chp, gtps. - armature 1945840 for starter motor model 50 mt del , boot 801077 for starter motor model 50 mt delco , bushing c.e frame 1894638 for starter motor 50 mt , bushing lever housing 1894637 for starter motor 50 mt , contact assly.1977264 for starter motor 50 mt , switch p.no:1115559 for starter motor model 50 mt delco , stud bolt terminal 1953244 for starter motor 50 mt , screw pole shoe part no.10499632 for delco remy make starter model 50 mt/24 , volts. seal oil part no.1918047 for delco remy , make starter model 50 mt/24 volts. gasket part no.1945476 for delco remy , make starter model 50 mt/24 volts. brush part no.1852888 for delco remy , make starter model 50 mt/24 volts. drive assly. part no.830620/1976884 for , delco remy make starter model 50 mt/24 volts. , field coil part no.1945853 for delco remy make starter model 50 mt/24 volts. , delco rammy make self starter motor assly.p.no-10478911 ( d 24 volt sr-28 )24 , volt 50 mt clock wise direction lispart auto bulbs 9437a, 24v, 54/44 watt , for nta 855 l locomotive battery terminal positive (heavy duty) , battery terminal negative(heavy duty) copper flexible cable 1 corex70 sqmm , (440/0.45 mm) solenoid switch assembly p.no-26964012b , regulator p.no-26938063a sr 40 regulator 24v 440-24-503 , halogen lamp h4 p 45 t, 24 volt, 100/90 watts for san make dl-800 locomotive. as , per sample. alternator gac5r-24-504- koel sl 90 make , lucas tvs lucas make starter motor assembly , model no sm130pe p.no:26925057a positork drive assembly part no 26252170 , for lucas make starter motor model no sm 130pe. , complete starter motor assembly r50, 24volt, 9kw, part no.95202515x for beml , make bulldozers lucas tvs make alternator assly 24 volt , 50 amp. gac-5r-24504/gac-5r-24514 brush box assly 9030315a for nta 855 l , locomotive brush plate assy with screw, p.n 95201097x , for reil make starter assy r-42 series.
Tender For consumable and non consumable items/machine/instrument for dental department. - glass ionomer cement for restorations premium quality strontium based glass ionomer cement which contains powder and liquid bottles of standardized quantity. should have mixing time not less than 30 seconds, working time not less than 2 minutes, should promote internal remineralization and surface strengthening and final finish can be completed under water 15 minutes from start of mix. durable and longer lasting restorations, reamers no. (15-40) 21mm, reamers no. (15-40) 25 mm, reamers no. (45-80) 21 mm, reamers no. (45-80) 25 mm, k- files no. (15-40) 21 mm, k- files no. (15-40) 25 mm, k-files no. (45-80) 21 mm, k-files no. (45-80) 25 mmpremium quality k- files and k- reamers made up of medical grade rust proof stainless steel. should be autoclavable. each pkt should contain 6 instruments., gutta percha points no. (15-40) and no. (45-80)premium quality standardized colored (not color coded) gutta percha points. should be cadmium free, latex free, radio-opaque and hand rolled. each packet should contain 120 gutta percha points., zinc oxide powder and eugenolpremium quality polymer reinforced zinc oxide powder and eugenol liquid. powder should be arsenic free. 110, silver powder premium quality fine grain, high silver content alloy with high strength, easy carving and polish. packaging bottles of 30gms silver alloy powder. should provide long lasting restorations., dental mercurypremium quality triple distilled mercury and should be free of any suspended particle. bottle should contain more than 20 gms of mercury., composite restorative material with etchant and bonding agentpremium quality 32 syringes of various shades of light cure hybrid composite restorative material with 8 etchant bottles and 8 bonding agent bottles along with brush tips and handle for etchant placement and applicator tips for bonding agent placement. should have excellent physical properties, good polishability, high radiopacity, and long working time., finger spreaders no. 15-40 and no. 45-80premium quality finger spreaders made up of medical grade rust proof stainless steel with pointed tip for lateral condensation of gutta percha points. should be autoclavable. each packet should contain 6 instruments of 25mm & 21mm length., rubber polishing cups and brushpremium quality silicone rubber cups and nylon brushes for dental prophylaxis. should be mounted on contra-angle hand piece.rubber polishing cups and brushpremium quality silicone rubber cups and nylon brushes for dental prophylaxis. should be mounted on contra-angle hand piece., polishing pastehigh quality dental polishing paste for plaque removal, cleaning and polishing of tooth. should be supplied in not less than 75 gms jar. should be composed of sodium fluoride, glycerin, and silica in controlled particle sizes in an aqueous flavored base., e-arch barpremium quality e-arch bar made up of medical grade, autoclavable, rust proof stainless steel material for intermaxillary fixation. should be supplied in one ft. roll, 26 guage ss wire (soft) for fracture wiringhigh quality 26 guage ss wire made up of medical grade rust proof stainless steel used to attach e-arch bar to tooth for treatment of jaw fracture. should be autoclavable and supplied in standardized length., eugenol free temporary cementpremium quality self curing eugenol free temporary filling cement. should contain a mixture of zinc oxide, calcium sulfate, zinc sulfate in a permissible ratio. should be supplied in not less than 30gm jar., sterlization pouches for instrumentshigh quality dental sterlization pouch for sterlization of dental instruments. should be triple seal and triple heat processed, medical grade paper with autoclavable film, compatible for steam/chemical vapor sterilization. should be supplied in a box of self sealing 200 pieces of 90 x 260mm size., diamond burs assorted size (pack of 5 pcs)premium quality coarse, standard, fine and superfin
Tender For supplying and stacking various types of building, road and other construction materials at various palces of taluka mahemdabad under taluka panchayat, mahemdabad under mgnrega ( annual unit rate ) - brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylic emulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylic emulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists
Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka fatepura under taluka panchayat, fatepura under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, paving bitumen of grade vg 10 of approved quality, bitumen grade pmb - 40, coal tar, brick bats, wire brush, soft brush, portland cement, white cement, brass handles 125 mm with plate 175x32 mm, brass handles 100 mm with plate 150x32 mm mm, brass handles 75 mm with plate 125x32 mm, brass door latch 300x16x5x mm (0.380 kg), brass door latch 250x16x5 mm (0.350 kg), brass casement window fastener, brass quadrant stays 300 mm, brass screws 20 mm, nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, kerosene oil, unslaked lime, marble dust/ powder, acrylic distemper ist quality, having voc content less than 50 gm/litre, exterior primer, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, acid proof paint (chocolate or black), anticorrosive bituminous paint (black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, ordinary varnish, superior copal varnish
Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka dhanpur under taluka panchayat, dhanpur under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, paving bitumen of grade vg 10 of approved quality, bitumen grade pmb - 40, coal tar, brick bats, wire brush, soft brush, portland cement, white cement, brass handles 125 mm with plate 175x32 mm, brass handles 100 mm with plate 150x32 mm mm, brass handles 75 mm with plate 125x32 mm, brass door latch 300x16x5x mm (0.380 kg), brass door latch 250x16x5 mm (0.350 kg), brass casement window fastener, brass quadrant stays 300 mm, brass screws 20 mm, nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, kerosene oil, unslaked lime, marble dust/ powder, acrylic distemper ist quality, having voc content less than 50 gm/litre, exterior primer, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, acid proof paint (chocolate or black), anticorrosive bituminous paint (black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, ordinary varnish, superior copal varnish
Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka dahod under taluka panchayat, dahod under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, paving bitumen of grade vg 10 of approved quality, bitumen grade pmb - 40, coal tar, brick bats, wire brush, soft brush, portland cement, white cement, brass handles 125 mm with plate 175x32 mm, brass handles 100 mm with plate 150x32 mm mm, brass handles 75 mm with plate 125x32 mm, brass door latch 300x16x5x mm (0.380 kg), brass door latch 250x16x5 mm (0.350 kg), brass casement window fastener, brass quadrant stays 300 mm, brass screws 20 mm, nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, kerosene oil, unslaked lime, marble dust/ powder, acrylic distemper ist quality, having voc content less than 50 gm/litre, exterior primer, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, acid proof paint (chocolate or black), anticorrosive bituminous paint (black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, ordinary varnish, superior copal varnish