Coating Tenders

State Government

CTN :39655610

17 Mar, 2025 NA

Nashik - Maharashtra

Tender For providing supply material for grampanchayat related work at sonisangavi tal chandwad dist nashik - cement , cement door frame , farashi shahabadi polish , toilet pot , glaze tiles , sintex door , pever block (rubber mould) , steel 6mm , steel 8mm , steel10mm , steel 12mm , steel 16mm , steel 20mm , strucaral steel , angle 2" , gi jali 2'x2' , fly ash bricks , square pipe , stone , sand , briks , natural sand , metal 20mm , metal 40/60mm , murum , wash sand , aggrigate 10mm , aac block 8"/8"/24 , aac block 9"/8"/24 , aac block 6"/8"/24 , aac block 4"/8"/24

Central Government / Public Sector

CTN :39656259

25 Mar, 2025 5.47 Crore

Panipat - Haryana

Tender For mitigation of cui (corrosion under insulation) prone in piping and equipment as per inspection recommendation by suitable protective coating and re-insulation at panipat refinery (phase-1) (part c and d).

State Government

CTN :39656153

19 Mar, 2025 7.75 Lacs

Nicobar Island - Andaman And Nicobar Islands

Tender For polishing of outer side of windows, door and some stretch of entrance and other minor works at multi-purpose building at raj niwas under ae-ii, svpsd

State Government

CTN :39648787

19 Mar, 2025 NA

Bhusawal - Maharashtra

Tender For work contract for coating of condenser tubes end plate by brushable ceramic and water box by anti-corrosive chemical along with material during aoh of unit no 5, 500mw, btps, deepnagar.

CTN :39652731

14 Mar, 2025 5.56 Lacs

Multi City - Multi State

Tender For a/r & m/o to mps flats bungalow under sub div-i of pawd-i dg 2024-25 sh: polish work in furniture sectionsubwork/packages:polish work in furniture section

CTN :39618228

25 Mar, 2025 3.00 Lacs

Ujjain - Madhya Pradesh

Tender For yearly supply of hardware and paints material in vikram university ujjain - yearly supply of hardware and paints material, wooden screws all sizes (pkt. of 200 no.), towar bolt heavy (iron) 3" to 6", towar bolt heavy (iron) 6" to 8", wire nails all sizes, binding wire, putty for glasses, plain glass 3.5 mm. with fixing, ground glass 4 mm. with fixing, wire mesh jalli 24 gauge x 144 mesh, plain g.i. sheets 24 gauge, hydraulic door closer, fevicol, thinner, katani lime 1st qlty. (25 kg. bag), geru (35 kg. bag), turpentine oil, double hair painting brush per 25 mm. (wilson), double hair painting brush per 25 mm. (bharat), synthetic enamel paint including steiner 1 ltr. tin(asian/burger), synthetic enamel paint including steiner 4 ltr. tin(asian/burger), synthetic enamel paint including steiner 10 ltr. tin (asian/burger), oil bound distemper 5 kg. tin (asian/burger), oil bound distemper 10 kg. tin (asian/burger), oil bound distemper 20 kg. tin (asian/burger), red oxide (asian/burger), white cement (jk/birla), super decoplast plastic emulsion 5 kg. tin (asian/burger), super decoplast plastic emulsion 10 kg. tin (asian/burger), super decoplast plastic emulsion 20 kg. tin, aluminum paint (asian/burger), cement paint super snowcem, lock 6 lever 45 mm. (laxmi/harrison), lock 6 lever 60 mm. (laxmi/harrison), mortich lock 7 lever complete isi (laxmi/harrison), flush door 30 mm., aldrop nickel plasted 4", aldrop nickel plasted 6", aldrop nickel plasted 8", aldrop nickel plasted 10", aldrop nickel plasted 12", phawra with wooden handel, screw driver (taparia), playar (taparia), aluminium section two track 20 gauge (openable/slider/including 5 mm. glass with accessoes & including fixing ) with powder coating, aluminium section three track 20 gauge (openable/slider/including 5 mm. glass with accessoes & including fixing ) with powder coating, bracket for curtain, consild bracket, s.s. pipe 1", iron chain heavy, screw 1" full thread, screw 2" full thread, screw 3" full thread, door kit complete, geti with wooden handel, kulhari with wooden handel, grass cutter patti, marble powder, hexa blade dp., bombay nails all size, cotton mope, sika jhadu, phool jhadu, nutbolt all size, hinges 6", hinges 4", pvc. ceiling with installation, netlon jali, rope 10 mm.

CTN :39644160

14 Apr, 2025 94.87 Lacs

Bokaro - Jharkhand

Tender For acid and alkali resistant coating in drain, floor and degasser tank of water chemical treatment plant

Central Government/Public Sector

CTN :39645418

22 Mar, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and supply and fix

Central Government/Public Sector

CTN :39527032

19 Mar, 2025 16.66 Lacs

Gorakhpur - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - supply and service of rubber lining and frp coating

Central Government / Public Sector

CTN :39643081

24 Mar, 2025 45.48 Lacs

Delhi - Delhi

Tender For statutory ndt inspection, hydro testing, external painting and certification of pressure vessels horton sphere and anti corrosive treatment and application of fire proof coating on legs supports at delhi lpg bottling plant, tikrikalan

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector