Fabric Tenders

State Government

CTN :43117006

17 Dec, 2025 NA

Delhi - Delhi

Tender For procurement of hardware items for day to day maintenance of various tube wells installed in 185 and 186 under okhla constituency ac-54. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal(a) 50mm dia., (b) 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:(a) 50mm dia., (b) 40mm dia, fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:(a) 50mm dia., (b) 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt., supply of ms full threaded nut bolts off sizes., supply of rubber packing (a) 50mm dia flange, (b) 40mm dia flange

State Government

CTN :43117029

17 Dec, 2025 NA

Delhi - Delhi

Tender For sic of submersible pump set and all allied e/m equipment for rebored tube well near h.no.-116c shahpur jat in greater kailash constituency ac-50. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 10 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point:200 lpm on 90 mtr. head. having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved make, supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted.a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no.b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 noc) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no.e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable bankingg) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos. complete wiring & installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated & pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs.make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., s/o nut & bolts of 1/2 dia of different size i.e. 1.5 dia& 2.5 long full threaded., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 8-10 inch diameter made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2 dia. with locking arrangement by nuts & bolt., earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

State Government

CTN :43117042

17 Dec, 2025 NA

Delhi - Delhi

Tender For procurement of hardware items for day to day maintenance of various tube wells installed in ward no-180 and 181 under badarpur constituency ac-53. - supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal50mm dia., supply of tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged of size (120 mm dia.) of gi pipe.make of pipe:- tata / jindal 40mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes:50mm dia., supply of ms clamp of 600 mm length duly fabricated form 12.5 mm thick 75 mm wide m.s. plate for holding the g.i pipe of sizes: 40mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes:50mm dia., fabrication and supply of g.i. 90 bend having flange at both ends (heavy duty). of following sizes: 40mm dia., fabrication and supply of bore cover approx size lx1 made out from 6mm thick m.s. sheet in 2 halves & a circular hole in centre 3-1/2" dia. with locking arrangement by nuts & bolt., supply of ms full threaded nut bolts of sizes., supply of rubber packing 50 mm dia pipe flange, supply of rubber packing 40 mm dia pipe flange

State Government

CTN :43126731

17 Dec, 2025 1.55 Crore

Nagpur - Maharashtra

Tender For design, fabrication, supply, installation, testing and commissioning of total 270 kw grid connected solar pv power plant under roof-top net metering at district government hospital and district jail (class-1), bhandara, district bhandara

State Government

CTN :43126755

16 Dec, 2025 41.22 Lacs

Nandurbar - Maharashtra

Tender For survey, design, fabrication, supply, installation, testing and commissioning of total 75 kw grid connected solar pv power plant with roof-top net metering at jawahar navodaya vidyalaya shravani of navapur taluka of nandurbar district in the state

State Government

CTN :43122876

26 Dec, 2025 NA

Ukai - Gujarat

Tender For supply of various s.s. fabrication items- stationary pivot pin for burner tilting mechanism of 210mw utps. ,pin for burner tip (style- 02 drg. no. utps - b- 5082. ,pin for burner tip (style- 03) drg. no. utps - b- 5082. ,pin for coas oil burner tips st-04 ,pin for burner tip (style- 05) drg. no. utps - b- 5082. ,split pin style- 06 drg. no. utps - b - 5082. ,cotter pin 40 x 3 mm ,cotter pin 5 x 50 mm (split pin) ,seamless sleeve for wall deslagger m.o.c. ss304 od - 85 mm id - 80mm & length-135 mm temp-1100c. ,seamless sleeve for wall deslagger m.o.c. ss304 od-108mm id-92mm length-130mm temp-1100c.

State Government

CTN :43117877

22 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

Central Government/Public Sector

CTN :42922031

12 Dec, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : fabrication and supply of critical piping items with bhel materials - osb

Central Government/Public Sector

CTN :43127595

26 Dec, 2025 9.59 Lacs

Hisar - Haryana

Tender For supply of insect net cover,shade net cover for net house roof 125 gsm,aluminum profile as per requirement,zinc coated spring for aluminum profile,frp gate,double laminated skirting fabric 160 gsm of 1.5 mtr width n.s item,providing and fixing g i pipes hollow tubular pipe as per requirement 12 kg per 6 metre,sliding aluminium shade net with accessories shade factor of 50 percent,hdpe or pp weed mat minimum 125 gsm cutting to size and shape,3 mm gi wire for cross supporting of roof and laying of aluminium shade net,pvc and cpvc pipe and fittings

State Government

CTN :43114543

30 Dec, 2025 19.99 Lacs

Petlad - Gujarat

Tender For annual rate contract for fabrication of various line materials (items) for all sdn in petlad store under petlad (o&m) division

By Cities

By States

By Agencies

By Ownerships

By Sectors