Get complete information related to latest G I Fittings Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic G I Fittings Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding G I Fittings Tenders.
Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges
Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm
Tender For supply of 65mm dia gi pipe screwed and socketed medium grade confirming to relevant is specification 1239 , 65mmx65mmx65mm dia gi tee as per isi standard , 65mm dia gm gate valve as per isi 778 , 65mm dia gi union socket as per isi standard , 65mm dia gi nipple 6inch length as per isi standard , 65mm dia gi coupling socket as per isi standard , 65mm dia gi plug as per isi standard , 80mm dia gi pipe screwed and socketed medium grade confirming to relevant is specification 1239 , 50mm dia gi pipe medium grade confirming to relevent is specification is 1239 , 80mmx80mmx80mm dia gi tee as per isi standard , 80mmx80mmx50mm dia gi tee as per isi standard , 80mm dia gi union socket as per isi standard , 50mm dia gi union socket as per isi standard , 80mm dia gm gate valve as per is 778 , 50mm dia gm gate valve as per is 778 , 80mm dia gi nipple 6inch length as per isi standard , 50mm dia gi nipple 6inch length as per isi standard , 80mm dia gi coupling socket as per isi standard , 50mm dia gi coupling socket as per isi standard , 50mm dia gi bend as per isi standard , 50mm dia gi plug as per isi standard , synthetic enamel paint , m-seal 250 grms
Tender For supply of 80mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 8.53 kg per metre , 65mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 6.54 kg per metre , 50mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 5.10 kg per metre , 80mm dia gm gate valve heavy duty , 80mm dia gi union socket , 80mmx80mmx80mm dia gi tee , 80mm dia gi bend , 80mm dia gi coupling socket , 80mm dia gi elbow , 80mm dia gi nipple 6 inch lenghth , synthetic enamel paint , 80mmx 65mm dia gi reduser , 65mm dia gi union sosket , 50mm dia gi union sosket , 65mm dia gi nipple 6 inch length , 65mm dia gi bend , 65mm dia gi coupling socket , 65mm dia gi elbow , 65mmx 50mm dia gi reduser , 50mm dia gi nipple 6 inch length , 50mm dia gi bend , 50mm dia gi coupling socket , 50mm dia gi plug
Tender For on risk & cost piped water supply scheme for village-chando(schooltola)block- balrampur, district balrampur(c.g.)construction, testing and commissioning of r.c.c. elevated service reservoir of 30 kl capacities 01 no. & staging 00 mtr, oht repairing {steel structure 12 m height & 10 kl (5000l x 2no.) 00 no. and steel structure 09 m height & 10 kl (5000l x 2no.)- 00 no.} of total - 00 nos. pe tank & elevated service reservoirs of rcc staging and hdpe slim tank of capacity 5000 ltr of 00 no. 9 mtr staging (with switch room of size 1.8mx1.8mx3m) and 10000 ltr of 00 no. 12 mtr staging.including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.providing, laying, jointing, interconnection, testing and commissioning of rising main upvc class 10 kg/sqcm 90 mm dia 00 m & hdpe 75mm dia 600 m & 63 mm dia 00 m., distribution upvc class 6kg/sqcm 90mm dia. 1550 m., 110 mm dia. 00 m., 140 mm dia. 1710 m. 160 mm dia. 470 m.& distribution hdpe class 6kg/sqcm 63 mm dia. 1201 m., 75 mm dia. 636 m.with suitable joints gi pipe, valve, specials and all fittings including all allied civil works, supplying & installation of energy taging n five star bee rating isi marked required capacity single phase / three phase, 50 hz, 220v,, deep well submersible pump stainless steel body, suitable for 4/6 tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe,ss/nylonwireropeandconnection cable including verification of tubewell yield& electric connection from cspdcl, construction of brick masonry switch room, construction of boundary wall around the over head tank, installation of electro chlorinator , construction of chlorinator room of providing functional household tap connection (f.h.t.c. 76 ) in individual households and government instiution etc. complete with trial run of 03 months after that o&m of 06 months under piped water supply scheme under jal jeevan mission for village-chando(schooltola)block- balrampur, district balrampur(c.g.)
Tender For on risk & cost piped water supply scheme for village-aanandpur(sadakpara),aanandpur(purabtola),block-ramchandrapur, district balrampur(c.g.)construction, testing and commissioning of r.c.c. elevated service reservoir of 45 kl capacities 01 no. & staging 12 mtr {steel structure 12 m height & 10 kl (5000l x 2no.) 00 no. and steel structure 09 m height & 10 kl (5000l x 2no.)- 00 no.} of total - 00 nos. pe tank & elevated service reservoirs of rcc staging and hdpe slim tank of capacity 5000 ltr of 00 no. 9 mtr staging (with switch room of size 1.8mx1.8mx3m) and 10000 ltr of 00 no. 12 mtr staging.including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber.providing, laying, jointing, interconnection, testing and commissioning of rising main upvc class 10 kg/sqcm 90 mm dia 00 m & hdpe 75mm dia 00 m & 63 mm dia 00 m., distribution upvc class 6kg/sqcm 90mm dia. 00 m., 110 mm dia. 00 m., 140 mm dia. 00 m. 160 mm dia. 00 m.& distribution hdpe class 6kg/sqcm 63 mm dia. 2446 m., 75 mm dia. 1459 m.with suitable joints gi pipe, valve, specials and all fittings including all allied civil works, supplying & installation of energy taging n five star bee rating isi marked required capacity single phase / three phase, 50 hz, 220v,, deep well submersible pump stainless steel body, suitable for 4/6 tube well with contral panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications butexcludingpipe,ss/nylonwireropeandconnection cable including verification of tubewell yield& electric connection from cspdcl, construction of brick masonry switch room, construction of boundary wall around the over head tank, installation of electro chlorinator , construction of chlorinator room of providing functional household tap connection (f.h.t.c. 119 ) in individual households and government instiution etc. complete with trial run of 03 months after that o&m of 06 months under piped water supply scheme under jal jeevan mission for village- aanandpur(sadakpara),aanandpur(purabtola),,block- ramchandrapur, district balrampur(c.g.)
Tender For 1 supply, installation, testing and commissioning of wall mount inverter type 1.5 ton capacity, 5 star ratingcooling machine (variable speed), compressor type- bldc, rated iseer value 5 & above, input power supply 230 v ac (+/- 10 %), 50hz, with one set heavy duty ms stand suitable for outdoor unit and additional material require (except standard installation material) 10-foot copper pipe, insulation, 2.5 sq.mm. frls copper flexible insulated cable. note: (1) require minimum 5 years warranty on compressor &3 year warranty on all type of electronic pcb circuit & rest parts of machine. (2) make: o general, daikin, voltas, samsung, blue star, ifb, haier, hitachi, mitsubishi (3) delivery required at : sse /rac/rjt office warranty certificate &test report to be submitted along with the material supplied. 4 nos, 2 sealed maintenance-free batteries, 12 volts, 100 ah capacity duly factory charged, confirmed to is 13369 specification with latest amendments. make-exide, amar raja, hbl, quanta, ameron only. 12 nos, 3 led flood light fitting 120w ip66, 230v, 50hz, with lm 79/80 certificate & warrantee of five years, 5kv surge protection, colour temp. 6500k, power fafctor 0.95, lumen output per led minimum 100 lumen/watt, beam angle 60degree, 85% efficiency of driver, led lamps of nichia/cree/osram/seoul/philips lumileds/lednium/avago make shall be used for the purpose of making fitting. fitting make: surya, bajaj, syska, philips, cromption, jaquar only 25 nos, 4 self-content drinking water cooler with(non-cfc refrigerant) energy efficient compressor, full ss body cooling capacity 150 ltrs / hrs, storage capacity 150 ltrs, rate of maximum energy watts 1550 watt, water cooler cabinet sheet material stainless steel ( grade aisi-304) cooler cabinet sheet thickness 0.8 mm, is: 1475 latest, make :usha, blue star, sidwal, godrej, voltas, hitachi, o-general only. oem proof of purchase to be submitted along with the material supplied. 2 nos, 5 10 h.p pump control panel for submersible pump, overload, dry run protection, microprocessor type, auto manual switch position selection switch type 2 position (auto-manual), ammeter & voltmeter digital, material and thickness of ms sheet used 6 mm gi sheet, color of paint finish power coat grey, power supply suitability three phase/415 v/50hz.make:-l&t,abb,c&s, havells, hpl only 1 nos, 6 1100 volt grade multi-stranded aluminum conductor cable having galvanized steel strip armored of size 4 core x 185 sqmm cross linked polyethylene, insulated, pvc sheathed with extruding process armored, confirming to is: 7098(part 1):1988 with amendment number 1 and 2 and 3 reaffirmed 2005 & improved fire retardant features as category c2 frls type. note: (1) oem proof of purchase to be submitted along with the material supplied. 2) type test certificate from nabl approved lab as per is: 7098 part 2 2011.make:-polycab,avocab,havells,paragon, finolex, bharatcab, rr kabel,finolex,l&t, anchor, kei,paragon, hpl, bentec, fortgloster only rites inspection should be as per is 1000 mtr