Tender For supply of pu painting kit of ls/rajdhani colours scheme coaches as per rdso spec. no. m&c/pcn/ 100/2018 with amndt. no. 1b as additional requirement. annexure 'b' (1) pu surfacer ( two pack) qty. 45 ltrs. (2) unsaturated polyster based knifing stopper putty ( two pack ) qty. 04 kgs. (3)full gloss pu top coat grey ( two pack ) to colour shade ral 7001 qty. 47 ltrs. ( 4)full gloss pu top coat single red ( two pack ) to colour shade isc no. 537 of is:5/2007 ,qty. 25 ltrs. ( 5 ) thinner for pu paint compatible with pu top coat qty. 65 ltrs. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]
Tender For construction material work in gram panchayat madolai-, ghadla kankar jhajra, , mortar - mud / mortar, , lime of bud bhat for masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone and brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit of mathar (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand broken stone aggregate (wides cart 1/11), , 90-45mm. hand broken stone aggregate (cut voids 1/11), , quarry rubbish (cut voids 1/6), , gravel (cut voids 1/6), , conker (cut voids 1/6), , binding material (pi 4-6) (cut voids 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material(3-4" thick & length and width 1-2"), , sandstone(dpc,sill,coping,lintel,tand,almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 901 to 2300 sq. cm., , upto 900 sq.cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , 901 to 2300 sq. cm, , up to 100 sq cm, , more than 2300 sq.cm, , stone threshold, , single pattam size 100 x 75 mm., , double pattam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles / blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core, , cable isi marked, , 1.50 sq mm., , poojaar's, , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single door), , structural steel, , iron (for tor steel fe 415/500 reinforcement), , winding wire 18 gauge, , iron guard, , angle iron square rebar leaf angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , cement concrete poles for wire fencing length 2.5 m average, , size 0.10*0.15 meter 4mm diameter high tension steer wire 8 nos, , including, , 150 cm high fencing of precast r.c posts of 15cm*15cm tapered to10*10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30*30*45cm) corner and every tenth posts to be strutted with same r.c. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with g.i. staples including earth work in excavation etc. complet, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , glass, , 3 mm thick glass, , 5 mm thick glass,
Tender For pron of furniture for deficient international sailors trainee accn with galley and dining hall at ins shivaji lonavla - almirah med steel with shelves :- overall size shall be all as shown on drawing. it shall be made of 20 gauge thick mild steel sheet. the almirah shall have three shelves. the almirah shall have one normal handle 120 mm long having three way locking system with proper workmanship. all joints and welding, fixing shall be done according standard workmanship.make of lock :- link/godrej/harrison.finish & paint :- all steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by ge) in seven stages tank process. the test certificate for powder coating is to be submitted through nabl accredited lab., bath stool pvc : -overall size shall be all as shown on drg. make- amko or equivalent, bed hard steel :- overall size shall be all as shown on drg. all steel shall be rectangular ms pipe of 18 gauge thick. the head board shall be 800 mm high and foot board shall be 500 mm high. the head and foot board shall be provided with 18 mm thick isi mark 303 grade plywood shall be laminated with 0.7 mm sunmica sheet (colour and shade as approved by ge). 2 mm thick pvc half round edge beading without joints shall be provided all around . the top of bed hard shall be 12 mm thick bwr plywood isi mark 303 grade provided as shown on drg. all joints and welding, fixing shall be done according standard workmanship. make of plywood : archidply/century/green plyfinish & paint :- all steel surfaces exposed to view when placed in position shall be powder coated (colour as approved by ge) in seven stages tank process. the test certificate for powder coating is to be submitted through nabl accredited lab., board notice :-overall size shall be all as shown on drg. all wood shall be first class teak wood.19 mm thick soft board shall be fixed in side of frame over which best quality green blaze cloth as approved by ge shall be fixed as shown on drg.aluminium flat of 63mmx3.25mm shall be provided all around at back of board.on front side 22mmx10mm aluminium channel shall be provided in side of particle board frame to house 4mm thick glass shutter.polish & finish:-all wood surface shall be melamine polished with high glossy finish. rest all as per drgs and as directed by engr-in-charge., chair dining cushioned :-overall size shall be all as shown on drg.all wood shall be first class teak wood.the size of the legs shall be 40x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.side frame of back of the chair shall be of section 40x50mm..four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.make of cushion:- sleepwell/kurlon/godrej interio polish & finish:-all wood surface shall be melamine polished with high glossy finish. rest all as per drgs and as directed by engr-in-charge., chair easy :- overall size shall be all as shown on drg.all wood shall be first class teak wood. the cane shall be 2 mm wide 0.4 mm thick half round and woven in godrej pattern. hard rubber/pvc shoe shall be fixed to the bottom of all legs as per drg.polish & finish:-all wood surface shall be melamine polished with high glossy finish. rest all as per drgs and as directed by engr-in-charge., chair writing :-the frame of the chair shall be of ms tubular frame powder coated ,cantilever type of size 25mmx10mm in section. back form shall be designed with contoured lumber support for extra comfort.12mm thick hot pressed plywood upholstered with superior quality fabric as
Tender For special repair to toilets and bathroom of building no. e-1 (or living) otm accn at inf div pro unit and rewiring and provn of elect fitting for certain otm and md accn at engr regt under ge (east) ferozepur cantt
Tender For bid to ras supply of mta ro 30 electrical and hardware items - angle holder , bulk head fitting , casing capping 25mm 2 mtr long , ceiling fan 1200 sweep , change over switch 32 amp double pole , change over switch 63 amp tpn , exhaust fan pvc box type size 300mm , fan regulator , geyser of 6 ltr capacity with complete accessories , gi tank nipple 20mm , insulation tape 19mm wide , led bulb 12 watt , led bulb 14 watt , led bulb 18 watt , led bulb 9 watt , led panel ceiling light 2x2 recess type 36w , led tube light fitting 20 w with fitting , mcb 10 amp sp , mcb 10 amp sp with spn 240v dp , mcb 16 amp dp , mcb 16 amp sp , mcb 16 amp , mcb 32 amp dp with box , mcb 32 amp spn , mcb 6 amp sp , mcb 6 amp sp with spn 240v dp , mcb 63 amp dp , mcb box 4 ways , pvc copper cable 1 pt 5 sqmm single core , pvc copper cable 2 pt 5 sqmm single core , pvc copper cable 6 sqmm 2 core , socket 15 amp , socket 5 amp , switch p t 5 amp , switch socket combination 15 amp with gang box , switch socket combination 5 amp with gang box , tullu pump half hp , cp bib tap 15mm , cp cloth hanger 300mm long , cp grating doom 100 mm , cp shower rose of 15 mm dia with 220mm long rod , cp stop cock 15mm , cp stop cock 20 mm , cp towel rail 600mm long , cp wall mixture for hot and cold water supply of 15 mm dia , cp waste copling of size 32mm , cp drapery rod 1 pt 2 mtr with 25 mm dia with both end socket and brackets isi marked , 12 mm thick plywood with cushion of size 1880mm x 890mm having density of 36 kg per cum , foam type fire extinguisher of 1 kg capacity , float valve pvc 20 mm , pvc low level flushing cistern 10 ltr capacity symphonic action type including all necessary fittings , iwc one vitreous china squatting pan , looking mirror 400 x 600mm with pvc frame , paint og , pvc bib tap 15 mm , pvc connection pipe 16mm dia 450mm long with pvc threaded , pvc pillar tap 20mm dia , pvc shower rose 75mm dia , pvc waste pipe 32mm dia for wash hand basin , red oxide primer , aluminium sliding bolt 150mm long isi marked , aluminium tower bolt 150mm long isi marked , turpentine oil , ewc with low level flushing , wash hand basin single bowl steel of size 900x400mm , rotational moulded polyethylene water storage tank with lid cylindrical vertical tank double layers of capacity 1000 ltr , rotational moulded polyethylene water storage tank with lid cylindrical vertical tank double layers of capacity 500 ltr , white cement , white paint , window glass , alternator for 7 pt 5 kva genr set of kirloskar , avr for 30 kva genr set of kirloskar , complete display panel for 30 kva genr set of kirloskar , overflow pipe for 30 kva genr set of kirloskar , cement of 43 grade opc in sealed bags each weighing 50 kgs the date of manufacture of cement should not be more than one month prior to the date of delivery , river sand , pcc bricks of size 230mmx115mmx75mm