Overhead Equipment Tenders

CTN :36278981

20 Jun, 2024 63.87 Lacs

Patna - Bihar

Tender For rate contract for supply of civil and mechanical items for maintenance work at aiims patna - gate valve 1" (brass), gate valve 1 1/2" (brass), gate valve 3/4" (brass), gate valve 2" (brass), gate valve 1/2" (brass), gate valve 3 1/4" (80mm) (brass), bend pipe washer , brass elbow 3/4'', distilled water 5 ltr, cp nipple 1'', cp nipple 1 1/2'' , cp nipple 2'' , cp nipple 4'' , cpvc endcap 1/2'' , cpvc plug 3/4'', cpvc socket 3/4'', cpvc solvent 100 gm, s.s screw 35/8 (50pic) packet, s.s screw 75/10 (50pic) packet, nail 1 1/2", nail 1"/17 no, nail 2", chinese kati 1 1/2", chinese kati 2", aerolite , 200 g tube, fevicol, star lock short, star lock long, narrow mortise lock(4 lever), thread, cupboard door handle- 150 mm, multi purpose lock, sili (sharpening stone), door seal 42", swr pipe 2'' 3m length, ft 3/4", ft 1", ft 1/2", ft 1 1/4", ss grating 5'' , cp health faucet (metal finish) with tube 1.2,1.5 mtr and stand, cp health faucet 1.5 meter tube , ptmt health faucet 1.5 meter tube , health faucet spray (ptmt), health faucet spray (cp), cp angle cock 2 in 1, inlet pipe washer , long bend pipe cistern to iwc , m seal 100gm, ptmt overhead shower rose 100 mm, cp overhead shower arm, ptmt overhead shower arm, gi plug 1 1/2'', gi plug 1'', gi plug 3/4'', gi t 2'', gi reducer 1 1/2''-2'' , gi elbow 2'', pvc elbow 3/4'', upvc sulation 100 gm, pvc tee 3/4'', short bend pipe , swr bend 2'', swr tee 2'', swr pipe 3''(3 m length), swr elbow 3'', teflon tape , wall mixer washer , ss waste coupling 32/40 mm, pvc sink jali, cp angle cock, cp long body pillar cock, cp concealed stop cock 15 mm , clamp 2", clamp 3/4" , clamp 1", hexa blade, chand bolt, gi nipple 3/4" 2", gi nipple 3/4" 3", gi nipple 3/4" 4", gi nipple 3/4" 6", gi nipple 1" 2", gi nipple 1" 3", gi nipple 1" 4", gi nipple 1" 6", gi nipple 1 1/4" 2", gi nipple 1 1/4" 3", gi nipple 1 1/4" 4", gi nipple 1 1/4" 6", gi nipple 2" 2", gi nipple 2" 3", gi nipple 2" 4", gi nipple 2" 6", gi socket 3/4" , gi socket 1", gi socket 1 1/4" , gi socket 1 1/2" , gi socket 2" , gi socket 2 1/2" , gi socket 3" , gi reducer 3/4" 1/2", gi reducer 1" 3/4", gi reducer 1" 1/2", gi reducer 1 1/2" 1 1/4", gi reducer 2" 1 1/2", gi reducer 2" 1/2" 1/2", gi reducer 4"3", gi reducer 3"2", wall mixer leg 90 dgree/ 45 degree, swr bend 40 mm , swr tee 40 mm, swr pipe 40 mm(3 m length), swr tee 63 mm, cpvc ball valve 3/4'', cpvc ball valve 1'', cpvc valve valve 1 1/4'', swr bend 63 mm, ss grating 4", s.s. screw 13x 6 , s.s. screw 19x6, gardening scissors, garden pipe 1", castic 500 gm, fasnut for basin, pvc sulation- 200 g, cp doctor bib cock, measurement tape 15 m pvc, measurement tape 30 m pvc, commode cover screw, gypsum screw 2" (400 pcs.) set, flush handle/lever, greese, geyser safety valve for bajaj company, bosch cutter machine 1450w, dr.fixit 301 sbr latex pidicrete urp, sbr latex for waterproofing & repairs , chesel 32mm, chesel 12mm, s s drill bit for steel 6mm , s s drill bit 1/8 , taparia 1541-8 pincers, screw driver 903 steel two in one screw driver, bosch proffesional gsb 600 drill machine, 18" pipe wrench, 10" pipe wrench, 110mm tile cutter blade, binder wire, nut bolt 3" 3 sutta, nut bolt 3" 4 sutta, nut bolt 4" 3 sutta, nut bolt 4" 4 sutta, c -clamp 3" gi/pvc, c -clamp 4" gi/pvc, thinner, die for gi pipe cut 1/2", die for gi pipe cut 3/4", die for gi pipe cut 1", die for gi pipe cut 1 1/4", die for gi pipe cut 1 1/2", spindral half turn(jaquar), spindral full(jaquar), spindral plumber tap, spindral for plumber sink/wall mixer, gi nipple 1/2 * 3", gi nipple 3/4 * 3", gi nipple 1/2 * 4", gi nipple 3/4 * 4", pvc socket 3/4", pvc socket 1", swr socket 2", upvc pipe 2" (3m length), upvc socket 2", upvc ft 2", upvc mt 2", upvc bend 2", upvc tee 2", upvc solvent 100 gm, mta 4", cpvc socket 2", cpvc ft 2", cpvc mt 2", cpvc bend 2", cpvc tee 2", mta 3/4"-1/2", mta 1" - 3/4", mta 1 1/4"-1", mta 1 1/2"-1", lab sink/surgical sink china, grass cutting wire 3 mm(nylon wire), grass cu

CTN :36277380

24 Jun, 2024 4.64 Crore

Mumbai - Maharashtra

Tender For design supply erection testing and commissioning 25 kv 50 hz single phase conventional type overhead equipment ohe and associated modifications at gm yard and bh yard of hdc railway network under haldia dock complex smpk on kharagpur division of ser

corporations/Associations/Others

CTN :35933389

03 Jun, 2024 10.00 Lacs

Bulandshahr - Uttar Pradesh

Tender For corrigendum : work of locating, repairing and replacing damaged cables of 33 and 11 kv overhead/underground lines cables through fault locator machine (vehicle mounted).

CTN :36260445

20 Jun, 2024 NA

Godda - Jharkhand

Tender For (a)"design, drawing, supply, erection, testing & commissioning of 25 kv a.c. single phase, 50hz overhead equipment, lt supply transformer etc. in connection with development of maintenance infrastructure at godda into lhb maintenance depot in malda division, (b) design, drawing, supply, erection, testing & commissioning of 25 kv a.c. single phase, 50hz overhead equipment, lt supply transformer for augmentation of infrastructure facilities for poh capacity enhacement of emu/memu/demu/t-car at different shop of kpa workshop over sdah division of eastern railway and (c) electrical trd work in connection with replacement of steel girder by providing rcc boxes at bridge no: 15 ccr at km 7/15-8/2 between ballyghat and ballyhalt in sealdah division of eastern railway."

Central Government And Public Sector

CTN :36140945

03 Jun, 2024 NA

Delhi - Delhi

Tender For corrigendum : supply of item- 1 providing and placing executive table of size 1800x900x750mm (wxdxh) with side unit of size 1050x450x750mm (wxdxh)., 2 providing & placing executive high back revolving chair. seat & back plywood made of 12mm thick hot pressed, 3 providing and placing executive low back fixed chair with special contour on the back rest for human body with lumbar support which protects the spine and leaves the shoulder free for easy movement. base of the chair made of erw ms round pipe of 25 mm dia & frame not less than 14 gauge duly powder coated up to 40-45 microns. seat and back made of 12 mm moulded ply. u foam is provided on seat & back with a bulge as per approved shape. u foam of density not less than 50 kg/m3. hardness of seat is 16. armrest is made of one piece well rounded polypropylene. model dvc 9223 nos. 6 4 providing and placing storage of size 750x450x750mm (wxdxh) made top & shelves made up of 25mm and base in 18mm thick pre-laminated particle board. the top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. 8 each 5 providing and placing modular linear workstation of size 1200x600x750mm (wxdxh). worktop made of 25mm thick prelaminated particle board duly edge banding & 0.5 mm thick backing laminate at the bottom with flat edges duly sealed. all exposed edge of particle board shall be sealed with 2mm thick pvc edge banded tape pressed/ pasted at 200'c with hot melt glue, complete including all necessary fittings & fixtures. partition panel laminated /upholested of 72 mm thick & 1200mm. height, snap on panel made of 12 mm prelaminated particle board duly edgebanded with raceway running at 2 levels one at skirting & one above or below the worktop.basic structure is composed of rolled steel vertical and horizontal members 38x38mm in 18 guage duly powder coated upto 40-50 microns to make the basic framework of partition.structure can be configured into any shape in 90 degree angle. all steel components are duly powder coated. size of partition:-1200 x 1200 ( wx h) = 19 nos. & 600 x 1200 ( wx h) = 16 nos. keyboard tray of size 600x400mm (wxd) made in 18mm thick prelaminated particle board duly edge banded. cpu trolley made of crca in 22 guage duly powder coated up to 40-50 microns with lockable nylon wheel castors. fixed three drawer unit of size 400x450x725mm (wxdxh) made of complete 18 mm prelaminated particle duly edge banded with necessary hardware fittings. three drawer (2 single & 1 filling drawer) .it shall have a single multi drawer lock. all drawer running on telescopic channel with necessary hardware fixture. nos. 21 6 providing and placing medium back revolving chair,back of overall height 41" overall depth of seat 19" and overall width 19" seat & back made of 12mm molded ply with high density back and pu molded seat cushion, having pu arm rest with bas seat & back and 5 pronged pp base with syncro tilt mechanism with movement of 2:1 ratio and fitted with rheumatic height adjustment.gas lift mechanism nos. 21 7 providing and placing overhead storage. body & shelves made of 20 gauge crca steel duly powder coated. shutters made of 18mm thick prelaminated particle board the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. i 750x450x750mm (wxdxh) nos. 8 ii 600x450x750mm (wxdxh) nos. 23

Central Government / Public Sector

CTN :36246354

21 Jun, 2024 NA

Ahmednagar - Maharashtra

Tender For design, supply, erection, testing and commissioning of 2x25 kv, 50 hz, single phase, a.c traction overhead equipment with 65 sq.mm catenary wire and 107 sq.mm contact wire, l.t supply transformer stations including modifications to existing ohe at parli vaijnath and connectivity to ahmednagar-beed-parli vaijnath line in view of proposed junction arrangements in connection with the connectivity of ahmed nagar-beed-parli vaijnath new line.

Central Government / Public Sector

CTN :36246359

21 Jun, 2024 NA

Krishna - Andhra Pradesh

Tender For design, supply, erection, testing and commissioning of 25 kv, 50hz single phase a.c. traction overhead equipment with 65sq.mm catenary and 107sq.mm hdg copper contact wire, lt supply transformer stations revised krishna yard arrangements showing proposed connection of track between ksn-dkc bg line and existing common loop line in krishna yard of gtl division under south central railway.

Central Government / Public Sector

CTN :36246358

21 Jun, 2024 NA

Multi City - Multi State

Tender For design, supply, erection, testing and commissioning of 25 kv, 50hz single phase a.c. traction overhead equipment with 65sq.mm catenary and 107/150sq.mm hdg copper contact wire, lt supply transformer stations proposed by pass line between ru-cen & ru- tcnr section of gtl division under south central railway.

CTN :36000853

27 May, 2024 NA

Leh - Jammu And Kashmir

Tender For bid to ras supply and installation of security surveillance supply and installation of 5 mp high quality ptz cctv camera equipment with all required accessories for surveillance , anpr number recognition cameras with driver libraries , 32 chanel 8 sata nvr recording system with power supply etc. , ip keyboard controller joy stick , artificial intelligence ai software for people counting and face recognition, license with server , 8 tb hard disk , cctv video display system 55 inches with hdmi vga inputs and smart android system , video management software , 8 port poe switch with sfp port , 8-port gigabit managed switch with 2 sfp port , poe switch rack with accessories extension box weatherproof pole mount , sfp module , ofc armored outdoor single mode 6 core - os2 single tube fiber protection tube with petroleum jelly fibre cable , cat 6 stp outdoor with ant rodent protection cable transmission frequency of 250 mhz minimum, cable should be 4 pair. , idc field termination connector ip-20 rated at camera side , 2 core wire 1.5 mm sq 300 mtr armored , pvc pipe, conduit and other accessories charges as per actual consumed , isi mark 30 mm hdpe pipe with jointer for fiber , pvc box heavy 5x5 inch , network rack 9 u loaded for nvr , laying of hdpe pipe with soft soil digging up to 2ft including the repair of same. , laying of fiber charges underground from pole to pole, fiber termination, etc , laying of cat6 cable antirodent utp , laying of conduit pipe heavy duty 1 inch pvc conduit with accessories like gatti, clamp, bend etc. steel support wire for wire poller overhead cable , installation of camera with termination of cat6with field termination connector and housing fixing , installation of pole mount or wall mount rack including accessories with switch installation , power backup system with 5kva ups , 32 chanel 1 sata nvr for 2nd location display , server for video management software , 2nd year amc cost , 3rd year amc cost

Central Government/Public Sector

CTN :36229305

01 Jun, 2024 1.97 Lacs

Chhindwara - Madhya Pradesh

Tender For providing of repair, maintenance and installation of plant/ systems/equipments - miscellaneous repairing work in overhead line of ghorawari colliery no2 of ghorawari subarea; electrical system or installation; service provider

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector