Rod Tenders

Corporations/Associations/Others

CTN :40114492

09 May, 2025 NA

Beed - Maharashtra

Tender For supply electrical material for electrical department m.c. ambajogai dist beed - 1.5mm2 1/18 pvc wire 91 mtr, 2.5mm2 1/18 pvc wire 91 mtr, casing caping, 8 way switch board with cover plate, 16 way switch board with cover plate, 6 a 10 a switch, 16 a switch, ceiling fan 1400 mm, cabin fan 400 mm, cooler 55 ltr, 1.5 ton ac with compresser unit, electronic ding dong bell, 18 watt led bulp, 20 watt tube light with all fitting acessaroes, 3 pin plug 16 a, 3 pin plug 6 a, 2 pin socket 6 a, 3 pin socket, fan regulator, 36 watt tube light, condenser 2.5 micro farad, backlit type pendent holder, ding dong bell, batten holder for lamp fitting, 2 pole mcb 16 a-32 a, main switch box with 3 cutouts 16 a each, ceiling rose, cutout kitkat fuse 32 a, electrical insulation tape (box), gi wire, stay wire with stay set, rain coat, gum boot, hexa blade, earthing rod / plate, tube light inbuilt invertor 20 watt, exhaust fan 900 rpm, electric extension board 16a/ 20a with 5 socket, electric extension board 6 a with 4 socket, 2.5 mm2 al. service wire, 4 mm2 al. service wire, 6 mm2 al. service wire, 10 mm2 al. service wire, bell switch, 2 core 6mm2 armad cable, 4 core 10mm2 armad cable, 4 core 16mm2 armad cable, 4 core 25mm2 armad cable, 4 core 35mm2 armad cable, 4 core 50mm2 armad cable, 4 core 70mm2 armad cable, flood light 100 watt, flood light 50 watt, flood light 24 watt, flood light 200 watt, spmcb 32 a, kitkat 63 a, 10/16/25 mm2 al. lugs, 35 sqmm cu. lugs, 18 25 watt led street light, 46-100 watt led street light, 26 45 watt led street light, water heater 1200 watt, distill water for battery, psc pole, hand glous, led bulp up to 10 watt, incandescent lamp up to 100 watt, 200 watt incandescent lamp, soldering machine, driver for outdoor led up to 50 watt, driver for outdoor led up to 55-100 watt, driver for outdoor led up to 105-200 watt, ant conductor for street light phase with gi wire, gnat conductor for neutral, panel box iron body (for meter, timer, contactor, cutout setup, shackle lt insulator, pcb for led lights up to 50 watt, pcb for led lights up to 55-100 watt, electric flyer, electronic type cordless call bell, rubber patch, iron / still lock with chain, screw driver, spanner, cutter, street light bracket 40 mm dia. b class gi pipe 1 mtr in length with clamp & nut bolts, kitkat 100 a, tong tester, drilling machine, torch light with cells, 2500 va digital pur sine vave inverter single phase 230 volts 50 hz, 12 v / 180 ah tubuler battery, 35 sqmm single core copper wire, gi pipe a class 25 mm dia., street light timer, street light contactor 70 am, rsj pole 8 mtr, fan huke with fan clamp

Central Government/Public Sector

CTN :40131559

21 May, 2025 NA

Delhi - Delhi

Tender For supply of pull rod main slack adjuster side

Central Government/Public Sector

CTN :40132396

28 May, 2025 NA

Bhusawal - Maharashtra

Tender For supply of hand brake pull rod for boxnhl wagon to rdso drg. no. wd-09057-s-01, alt.-03, item no.12. material should be is 2062 : 2011 (re-affirmed-2021) with amendment no. 1 of nov. 2012, gr. e 250 a.

State Government

CTN :40114579

30 Apr, 2025 NA

Gadchiroli - Maharashtra

Tender For rate contract of miscellaneous item for financial year 2025-26 for grampanchayat vivekanandpur ta. mulchera dist. gadchiroli - material, led bulb 18v, led bulb 23v, led bulb 30v, wire 4mm, wire 6mm, wire 2.5mm, holder, switch 6a, switch 16a, switch 2vay, socket 6a, ncb 16a, regulator, gi pipe 11/4x10, connecting rod, gi socket, chain, exale, bering, cilender, janta handle, apper wall, lower wall, nutbolt, water chember, janta hed, waysar kit, heg tension 11/2 fit, bled, janta handpump, brass payali, pipe wrenge 24", pipe wrenge 12", pipe wrenge 18", liptar, adjest pana, whaise, all in one pana, rod dai, bliching powder 25kg, pvc pipe 110mm, pvc pipe 90mm, pvc pipe 75mm, pvc socket 110mm, pvc socket 90mm, pvc socket 75mm, pvc elbow 110mm, pvc elbow 90mm, pvc elbow 75mm, pvc tee 110mm, pvc tee 90mm, pvc tee 75mm, upvc pipe 1 , upvc pipe , end cap 110mm, end cap 90mm, end cap 75mm, upvc elbow , upvc socket , upvc tee , upvc mta , upvc fta , upvc brass elbow , service saddle 110mm, service saddle 90mm, service saddle 75mm, pvc solution 1 ltr, cpvc solution 100 ml, tapeline tape 1 pic, pvc bibcock, ferule 15mm, sluves valve, telpice, telpice flang, cement chair, fiber chair, office table, almari 6 ft, computer, printer, inviter

State Government

CTN :40138522

02 May, 2025 11.32 Lacs

Pernem - Goa

Tender For providing and installing various electrical accessories to various government primary schools in pernem taluka - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in pvc casing caping with modular switch modular plates suitable size modular surface box of specified category and earthing the point with 1.5 sq.mm fr pvc insulated copper conductor single core cable etc. as required.;(c) group c -- with cat a modular accessories, wiring for 5a /15a plug with 2 x 4 sq.mm fr pvc insulated copper conductor single core cable in pvc casing capping alongwith 1 no 4 sq.mm fr pvc insulated copper conductor single core cable for loop earthing as required., supplying and fixing suitable size modular pvc box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 a modular socket outlet and 5/ 6 a modular switch connection painting etc. as required., supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required;(a) cat a, installationearthing testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm frfrls pvc insulated copper conductor single core cable etc. as required., supply and erecting of 48 inch (1200mm sweep) ceiling fan double ball bearing type complete with all accessories.;(a) cat a, supply and erecting s type stainless steel fan hook fabricated out of 10 mm round bar complete as required., supplying and fixing extra down rod of 20 cm length gi pipe 15 cm dia heavy gauge including painting etc as required, supplying and fixing 6 a to 32 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(a) sp cat a, earthing with gi earth pipe 2 mts long 40 mm dia medium class with isi markof approved brands including accessories and providing masonry enclosure with ci/rcc cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the earthing drawing provided by the engineer-incharge.the scope of work includes the following: a) excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) class b gi pipe 40mm diameter as per specifications. c) charcoal/salt as per specs ( paid seperately). d) refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)masonary chamber with proper foundation cover plate and locking arrangement. f) testing of earth value with earth megger and certifications of its value. aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).;(a) in soily strata, extra for using salt and charcoal for pipe earth electrode as required( 65 kgs of charcoal and 5 kgs of salt)., providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required, supply of 3 core unarmoured pvc/xlpe insulated pvc sheathed copper conductor cable of 1.1 kv grade with isi mark conforming to is:1554(part i) is:7098(part i) with latest amendments of following size.;3 core 2.5 sq.mm, supply and fixing of led batten 4 feet 20 watt with led tube as required of make panasonic or equivalent in crompton bajaj havells as approved by engineer incharge. the led tube should have a warranty of two years from the date of commissioning.

Central Government/Public Sector

CTN :40122499

19 May, 2025 NA

Ranipet - Tamil Nadu

Tender For supply of push rod for air brake cylinder with bush of flex1 coil bogie to drg. no. sr.lw. 3.19.15 (wap 1 /wap 4 ) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39909646

02 May, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of hydraulic cylinders and seals - hyd.cylr dia.80x50x70st. ct-1 cylr.no 12 , set of seals for hyd.cylr . ct-1 and ct-2 , hyd.cy ok and rej dia.80x50x420ct-2 c.no 14 , set of seals for hyd.cylr c.no 14 , hyd.cylr.140 100x1400 align.con c.no 47 , set of seals - cross transfer , main pump-35vq-38a- 1b-20 wbf , intra vane pump 35vq-25a-1.c-20 rhf , hyd.cylr dia.50x36x250 stroke cyl.no 48 , set of seals 50x36x250 stroke cyl.no 48 , rod end eye for cylinder no 48

Central Government/Public Sector

CTN :40140779

17 May, 2025 1.19 Crore

Dhubri - Assam

Tender For supply of commissioning of gi pipe earthing , supplying and laying 25 mm x 3 mm copper strip , sitc of 5 kg abc or co2 type fire extinguishers , design, manufacturing, supply, installation, testing and commissioning of environmental friendly aerosol based fire suppression system , supply, installation, testing and commissioning of conventional agent release control panel with battery back up for 30 minutes in alarm condition , supply, installation, testing and commissioning of conventional type en listed or equivalent indian standard ip based optical smoke detectors , supply, installation, testing and commissioning of conventional type en listed or equivalent indian standard ip based heat combination detectors , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based manual release switch , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based manual abort switch , supply, installation, testing and commissioning of en listed or equivalent indian standard op based manual call point, , supply, installation, testing and commissioning of en listed or equivalent indian standard ip based conventional sounder cum strobe , supply, installation, testing and commissioning of gas discharge identification signage , supply, installation, testing and commissioning of addressable ip based multi photo electric or optical smoke detector or fire sensor , supply, installation, testing and commissioning of auto dialer unit , supply, installation, testing and commissioning of ip based addressable manual call point , supply, installation, testing and commissioning of ip based addressable horn cum strobe , supply, installation, testing and commissioning of fire alarm armoured cable , supply, installation, testing and commissioning of response indicator on surface or recess ms box , supply, installation, testing and commissioning of supporting tube for hvi long conductor , supply, installation, testing and commissioning of elevation pole made of gi material having isi marking , supply, installation, testing and commissioning of fixing clamp with tensioning strap, for fixing combi supporting tubes , supply, installation, testing and commissioning of high voltage resistant insulated down conductor , supply, installation, testing commissioning of conductor holder for installation of the hvi conductor in explosion hazardous areas ex zone 1 , supply, installation, testing and commissioning of connection elements for sealing the hvi long conductor on both ends, for implementing the sealing end of the conductor in the supporting tube , supply, installation, testing and commissioning of connection elements for sealing the hvi long conductor at both ends, , supply, installation, testing and commissioning of fixing kit for hvi long conductor black or grey , supply, installation, testing and commissioning of eb connection element for discharging the electric field of the hvi long conductor in the sealing end range. , supply, installation, testing and commissioning of lightning strike counter for digitally recording impulse currents the counter is preferably installed on the down conductors , supply, installation, testing and commissioning of uni disconnecting clamps with intermediate plate as test link for round and flat conductor of material , supply, installation, testing and commissioning of copper bonded rod , supply, installation, testing and commissioning of poe surge arrester of class d m surge arrester, class d spd , supply, installation, testing and commissioning of rj45b 48 surge arrester of class d m surge arrester, class d spd , supply, installation, testing bid details/ 2 / 40 and commissioning of 3 phase or type 1 plus 2 kema certified lightning current and spd , supply, installation, testing and commissioning of gi pipe with socket and reducer , supply, installation, testing and commissioning of gi pipe with suitable gi base plate to mount 4 inch gi pipe siz

corporations/Associations/Others

CTN :40141377

24 May, 2025 NA

Bankura - West Bengal

Tender For supply of spring loaded power cylinder 6 inch bore x 178mm stroke, double acting cylinder non cushioned with rear pivot d mounting. piston rod dia 38 point 1 mm. , power cylinder, 6inch bore x 10 inch stroke, double acting cylinder non cushioned with rear pivot d mounting. , power cylinder, 76 point 2 mm bore x 75 mm stroke, front mounting. , power cylinder, 2 point 5 inch bore x 102mm stroke, double acting cylinder non cushioned with rear pivot d mounting. , power cylinder, 4 inch bore x178mm stroke, double acting non cushioned with rear pivot d mounting. , spring for the power cylinder cylinder zrm-960-178-d-s-pl- 6 inch bore x178mm stroke. , spring for air cylinder for fly ash diffuser intake valve for fly ash system, 100 mm bore x 127mmstroke, doubleacting cylindernon cushionedwith rear pivot d mounting. , bucket-piston for the cylinder 6inch bore x 8 point 9 inch stroke rear pivot mounting, materials - steel re-inforced nitrile rubber. , kit zqrm-960-00 seal kit for cylinder zrm-960-178-d-spl-6bore x178mm stroke d. a cylinder non cushioned with rear pivot d mtg , material nitrile rubber. , kit zqrm-940-00 seal kit for cylinder zrm- 940-178-d-spl 4bore x 178 mm stroke d. a cylinder non cushioned with rear pivot d mtg. material nitrile rubber. , kit seal kit zrm-940-00-spl for power cylinder zrm-940- 127-d-spl, material-nitrile rubber bid number/ & ( * ) : gem/2025/b/6152431 dated/ + : 26-04-2025 bid document/ 3 3 1 / 20

Central Government And Public Sector

CTN :40141814

17 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of seal kit cylinder assembly model no skt 2" -1" -10" double acting-mapp-1/35210/2573/ga ft ball valve , seal kit cf cylinder , mini door , seal kit for veljan 5 bore x 1 dia piston rod x 2 stroke lock off cylinder

By Cities

By States

By Agencies

By Ownerships

By Sectors