Rubber Scrap Tenders

Private Sector

CTN :41105766

29 Jul, 2025 NA

Ernakulam - Kerala

Tender For sale of property by hdfc bank limited, ernakulam v/s. m/s. appacheril rubbers

State Government

CTN :41099863

06 Aug, 2025 4.20 Lacs

Vaishali - Bihar

Tender For supply of kitchen toolkits : : - peeler ss , nozzle icing ss no. 8 star , paring knife 18 cm cartini , ss dough scrapper , pipping bag , chef -carving knife cartini model 6372 , wire whisk ss 300 mm , gas lighter long -crystal , palate knife cartini , bread knife cartini , rubber spatula , tool kit bag with institute logo size 16 inch by 16 inch

corporations/Associations/Others

CTN :41098433

17 Jul, 2025 NA

Kottayam - Kerala

Tender For sale of processed rubber

corporations/Associations/Others

CTN :41096641

22 Jul, 2025 NA

Erode - Tamil Nadu

Tender For condemned scrap materials iron, and other metals,cond.tyre rubber materials,cond.batteries

CTN :40825717

18 Jul, 2025 NA

Parganas - West Bengal

Tender For bid to ras purchase of spares - oring (ms sl-164) , gasket(fig-3250 oblique 02) , key(fig-62) , spring , ring snap , screw driver , collar , gasket header cover , spnr ojde 16x17 , packing (bd eng fig k2)(1set 9nos) , seal o ring (ms sl-128) , washer , pin dowel , hexagon screw , o ring , key(fig no-6015 , sl no-50) , spnr de 20x22mm , terminal battery negative (fig-1035) , bolt , spring(fig-03) , ojde spanner 18x21 mm , spring , positive terminal (ms sl-649) , spring , oil can 1 1 by 2 pint , o ring , o-ring , seal bearing , bushing rubber , gasket(ms sl-139) , flange , adjustable spanner 200mm , plunger inter lock , seal , oil , screw , spring , connection fuel inlet (ms sl-101) , gasket , packing , strainer , clamp , clamp , flexible nut spnr 350mm , spanner 10x11 mm (ojde , open end) , spill tube , hour meter cable , clamp , socket 22 mm(eqpt sl no-g15313) , wrench filter , hose(fig-38) , bolt , o ring , socket 17mm , pin , piston , spnr ojde 32x36mm , connection fuel drain(cum-p30) , tube assy , pre filter assy , ring o cover , screw driver attachment(sl no-g15313) , toggle switch (ms sl-202) , knob , bearing , crnkpin , std(sp) , 1pr , ring , rubber hose lg 72 , spnr ojde 12 x 13 , hose , hose , bearing , rfi capavitor assy , gasket cover , oil cooler , bushing , spnr ojde 18x19mm , 24 mm socket(sl no-g15313) , nut rod (ms sl-06) , 27 mm socket(sl no-g15313) , pinion spring , tube , 30 mm socket(sl no-g15313) , seal oil , sealing ring for 4 (mico) , shaft , clutch inner race(ms sl no-593) , seat (hyd filter) , rachet reversible , joint eye , plug , ring compression , set (oem) , socket 24mm with handle , connector , scraper lh , lever , wrench hook , ring seal , pipe , exhaust , main bearing , thrust , ball brg , cover , hose , head , bush pinion (ms sl-590) , hyd pump service kit , fuel pump , clutch plate , tube , tube , hose(n743) , bearing , ball , regulator (make lucas tvs)(ms) , lever change , adaptor , flywheel , strainer , flyweight assy , solonide switch , solonied switch , relief valve assy , lamp guard rear rh , lever (fig no 3065) , plate , bushing spherical(fig-6086) , adapter , manifold , water , manifold , water , oil , filler , bracket , flange , coupling , water pump service kit , brake(band) assy , hose , housing , drive tachometer , fuel cut-off valve , alternator assy , rod , seal kit , hose , bearing assy , hose (fig no-4512) , gear driven reverse(fig-2125) , lever , cover , shell connecting rod std (ms sl-07) , cover , bearing , ball , gear driven 3rd , trunion assy , rod , mounting flange assy , c ebracket assy , fan , grill , feed pump assy , cyl assy(fig-41) , rod , drum brake , starter (l-tvs -11teeth) , gear assy , idler gear , delivery valve holder , shifter clutch dog(price list sl-836) , pressure plate assy , board floor , idler front , gear and pinion set (counter shaft) , intermediate shaft a , joint (p-141) , camshaft(os sl no-526) , sprocket shaft removal(ctlg sl-14) , main clutch assy , clutch housing assy

CTN :41025095

04 Aug, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of 24brsc005 spares of various types of ro plants d d - pressure gauge , servo motor control valve , pressure gauge , thermister overload relay , processor control unit , charging plug , prefilter pump shaft seal , 2 way ball valve set , support bracket , pipe pl4 , o-ring 06.0053 , o-ring , o-ring 06.0282 , crankcase cover o-ring , shaft seal , radial shaft seal , oil scraper , ring , sealing , solenoid valve , strainer support care , pressure switch , ss service kit , grooved ball bearing , sleeve support ring p30/43-130 , pressure spring , pump v belt pulley 02 grooved , motor v belt pulley 02 grooved , shim 1 2 circle , bearing case , 1 4 mxpu4 elbow , 1 4 fxpu4 elbow , rod plunger , retainer seal 2 pc , spacer , w/coil springs , o ring cartridge filter housing , filter element , o ring hp connection , pu9 pipe , victaulic couplers 1 1 4 , permeate male elbow , smcv spindle seat , control transformer , highpressure gauge 0 100bar , lp hose 32 mm id bare hose , hp hose module out , hose high pressure , valve control for servomotor dn 40 kvs 18 0 , 3 8 mxpu4 elbow , abs service kit , ss service kit rosm 03 tpd , elbow connector 3 8 , dolomite , h p pump crankcase oil , hp hose to pt 60 , a/v mount for hp pp trolly , mcb 5 a 220 v , bearing cover o-ring

CTN :40633387

21 Jul, 2025 3.00 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : daiviya apda work under edsd- rura - carriage of various size pcc poles from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of various size st poles (9 mtr /11mtr/ 13mtr ) from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., carriage of line material viz. weasel/rabbit/racoon /dog conductor, g.i. earth wire, cross arm, angle, channel, cable boxes, static meter insulators, clamps and other line material from store center or from any other place to the respective site of work through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., erection of p.c.c double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c double pole the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of p.c.c single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of p.c.c single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p single pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p single pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., erection of s.t.p double pole including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work., grouting of s.t.p double pole. the support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement., renozzling of damaged stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work., dismentling of rusted weasal/racoon /dog conductor wire and g.i wire & safe carriage of scrap material back to store as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., laying, sagging, stringing, binding and jumpering etc. of weasal/dog/rabbit conductor in new erected pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for prope

CTN :41058783

21 Jul, 2025 NA

Doiwala - Uttarakhand

Tender For cleaning equipment - heavy duty flexible shaft with double round inner core complete with guard coupling and hand piece having double ball bearing and oil seal for use in 42 mm id brass tubes., size of shaft 16 mm x 8 mtr long, size of shaft 16 mm x 10 mtr long, size of shaft 18 mm x 8 mtr long, size of shaft 18 mm x 10 mtr long, inner core nipple for 16mm shaft, innner core nipple for 18mm shaft, hand piece (16mm shaft), hand piece (18mm shaft), motor adopter for above shaft, inner core for (16mm ), inner core for (18mm ), t.e. type tools head cutter with 15 cutter (12 straight and 3 bevelled) for use with flexible shaft having bsp thread and suitable for 42 mm id brass/ss tube. the tool head cutter will be made of best quality steel material duly hardened and tempered for longer service., spare for above te type tool head cutter size 42 mm, spare pin, spare straight cutter, spare spring, spare bevelled cutter, spare hinge, spare washer, turk head brush made of genuine round spring steel wire 28/29 swg for use with flexible shaft having 1 /2 bsp thread suitable for the tube., 42 mm i.d. tube, 98 mm i.d. tube, scrapper of spring steel suitable for tube cleaning of 98 mm i.d. brass tube, steel wire dusting brush of round spring steel wire provided with wooden handle size 6 x 2 , steel wire brush size 6 x 2 for sugar grader having round spring steel wire, sugar bag trolley complete with polymer wheel (heavy duty) size 10 x 2 x1 and trolley made of steel suitable for carryng 100 kg sugar bag., polymer trolley wheel for sugar trolley size 10 x 2 x 1 , flexible shaft machine mounted on 3 wheel m.s. trolley with carrying handle, 5.00 h.p.ac motor,tefc, 2900 rpm, with cover complete with push button (dol) starter & with 2 mtrs. cts cable, complete with adopters and direct coupled to motor shaft, complete in respects suitable to use with 1 /2 bsp thread flexible shaft, tool head cutter complete with 3 cutters for cleaning of brass tubes size 98 mm id with flexible shaft having 1 /2 bsp thread, brass nozzles monarch for emico-kcp make vacuum filter, brass nozzles for kcp make sd/cfg, machine, bag marking brush oval shape, pad type boring tool hand cutter size 38mm

CTN :41035063

17 Jul, 2025 NA

Punalur - Kerala

Tender For sale of sludge coagulum rubber

CTN :41035102

17 Jul, 2025 NA

Punalur - Kerala

Tender For sale of rubber scrap

By Cities

By States

By Agencies

By Ownerships

By Sectors

Private Sector

State Government

corporations/Associations/Others

corporations/Associations/Others