Tape Tenders

CTN :40838378

26 Jun, 2025 NA

Hyderabad-T - Telangana

Tender For supply of medicines- secukinumab injection 150mg , convatec base plate 413162 , convatec 57mm pouche 416420 , convatec stomahesive paste 183910 , convatec stomohesive powder 25510 , g-plast non woven tape nt-1025 , convatec 70mm moldable wafer 411807 , convatec 70mm colostomy bag 416423 , convatec stomahesive paste 183910 , convatec stomohesive powder 25510 , convatec esenta adhe.remover spray 423289 , itraconazole capsule 100 mg , pyridostigmine tablet 60 mg , glycopyrrolate tablet 1 mg , carvedilol tablet 25mg , tab.sacubitril 24 mg+valsartan 26 mg , leuprolide acetate inj 22.5mg/vialdepot , novorapid penfill 3ml cartri inj 100u/ml , tresiba penfill 3mlcartri for inj100u/ml , mirabegron er 25mg+solifenacin 5mg tab , silodosin capsule/tablet 8 mg , alpha ketoanalogue tablet

CTN :39884707

27 Jun, 2025 15.70 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras bid to ras supply of bur round tungsten carbide for 2 point 3 mm , ultrasonic cleaning sol with corrosion protection pkt of 20 to 25 pouches containing 15 ml each , denture adhesive powder bott 100 15 gm , hand piece lubricant spray bott of 500 ml , pre fabricated composite ready made veneers 0 point 3 mm to 0 point 5 mm assorted kit 55065 veneers , wax modelling base plate wax box of 226 point 85 gm , suction cleaning sol bott of 1 ltr , mta based root canal sealer pack of 2 gm , cold mould seal , mandrel and polishing tip holders set of 3 cylindrical tapering and screw head , paper glass perforated fine 7 point 6 cm wide roll of 25 mtr sand paper , rapid repair material liquid bott of 14 point 2 ml , self cure acrylic powder pink shade bott of 110 gm with rapid repair liquid 110 ml , self cure acrylic powder clear shade bott of 110 gm with self cure acrylic liquid 110 ml , bur surgical oral tapered fissure tungsten carbide for straight hand piece , bur surgical oral round tungsten carbide for right angle hand piece , prophylaxis paste jar of 300 to 500 gm , wire ligature stainless steel bsw gauge 28 coil of 15.24 meter , base plate lower box of 12 , base plate upper box of 12 bid number/ & ( * ) : gem/2025/b/6100939 dated/ + : 01-04-2025 bid document/ 3 3 1 / 20

CTN :40825750

15 Jul, 2025 NA

Parganas - West Bengal

Tender For purchase of spares - pin cotter splite 4x22 is 549 steel , rivet aluminium alloy round hd 4mm x 10 mm long4x1 , slotted round head(cqa-13 10 16) , tapping screw ab 10x13mm(cqa-13 10 16) , paper sand rough no zero 300x300mm , pin taper solid steel 6mm x 30 mm(cqa-13 10 16) , toggle wood , thread nylon 10 meter longong , stop rubber , screw driver engineers 150 mmlg , hammer engineering ball pin 200 gms with handle , spatula wooden 4mm thkx20mm widex170mm long (cqae- , needle sail markers triangular sewing(cqae-p) , blank rubber , cloth cotton dasuti , screw driver 290 mm long , pin lock top with chain(cqa-13 10 16) , pin tube bracing with chain , stiffener angle , dolly rivetting for 4mm dia rivets (cqa-13 10 16) , bars aluminium alloy (10mm diax 925mm- 04 nos , 10m , pin lock inboard , pin tube bracing with chain(cqa-13 10 16) , pin track with chain(cqa-13 10 16) , pin lock bottom with chain , cordage nylon 8 dia x9m long , rope nylon size 10mmx10m long , cordage nylon 12 mm dia 10m long , scissor , 150mm long , pin lock bottom with chain(cqa-13 10 16) , spike bridging (impd-0543) , chokes small , spike bridging , wire rope steel gal engr purpose16mm dia , cross linking agent in al btl with separate 0.85 l , plug screwed boat repair rubber , pin deck coupling with chains and cleat(cqa-13 10 , box repair kit , tube bracing , buoys anchor(cqa-13 10 16 - obt) , plank small 290x820x20mm thick , fabric neoprene nylon 0.5m long(cqae-p) , adhesive ad-94 with cla swastik 0.25 litre tin , rowlock ms galvanised with chain(cqae-p) , cloth neoprene coated nylon , life jacket 40 inch , paddle boat 1600mm long , life jacket (preserver waist coat) 91 cm by 36 in , plank large 950x150x20mm thick , valve diaphragm stop air inflation oblique deflation , bout hook 3.5m lg (7.5 cm dia) , row lock , fabric , nylon , neoprene coated 0.13kg by 275mmx1030mm , foot pump double nozzle , clamps double throat (1.5in) 38 mm , cover water protection canvas boat assult universa , tube bracing(cqa-13 10 16) , bag canvas accessories , anchor bridging 60 lbs , pin mooring 320mm long with cordage 15mm x 12 mtr , bailer boat , rope nylon 12mm dia x 15m long(cqae-p) , plank bow end 410x890x20mm thick , floor board assemble frp , pad cushioning head , crucible plastic cup 100ml , brush paint flat 127mm x 12mm , rope nylon 12mm x 5m , valve air(cqa-13 10 16) , repair kit bag , boat back

CTN :40717381

05 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For corrigendum : supply of tape adhesive w/p fabric 50mm wide

CTN :40606235

26 Jun, 2025 NA

Ranchi - Jharkhand

Tender For corrigendum : supply of stationery items f f - staplerpinsize10no , staplerpinsize246 , cellotapebrownwhite , cupwithsaucer , chairtowelwithhandtowel , ballpenred20blue100black30butter flow , pilotpenblue30green20 , envelopesizea3 , envelopesizea4 , envelopesmall , fevistick , floorcleaner , odonilbathroomfreshner , handwash , pagemarkerflag , goodknight , staplersize10nos , dustercloth , scrotchbritefoammade , batteryaa , batteryaaa , vimbarsoap , markerpenpermanent , roomfreshner , harpiccleaner1 ltr , collin1ltr , plasticlfolder , stickfile , plasticbagfile , blackhit700ml , surf1kg , callbell , phenylliquid1ltr , nepthalineball , paperclipbig , paperclipmedium , paperclipsmall , fileboard , filecoverwithofficenamelogosampleattached , highlightermulticolour , notesheet , stenobook , notebook , pinremover , punchingmachinelarge , punchingmachinesmall , calculator , uclip , tclip , dakpad , broomcoconut , broomflower , floormop , dinnerplate , spoon , eraser , sharpner , wiper , flagmultitype , zeroxpapera4 , zeroxpaperlegal , zeroxpapera3

CTN :40309972

27 Jun, 2025 6.80 Lacs

Bathinda - Punjab

Tender For bid to ras supply of surgical items - cotton laparotomy sponge , cotton sterile gauze swabs , alcohol swab , cannula fixator , combined dressing pad , cotton , crepe bandage , disinfectant wipes alcohol-based , disposable syringe with needle , disposable syringe with needle , examination gloves for single use , eye pad with adhesive borders acrylic based hypoallergenic adhesive , foam based haemostat dressing , folleys cathetor , fragmentable nasal pack , gamjee roll , hypoallergenic and latex free water resistance silk tape , iv cannula , infusion set , iv canula , latex free elastic adhesive bandage , medicated washproof antiseptic adhesive bandaid , methelated spirit , methyled sprit , non-woven cohesive compression bandage , roller bandage , ryles tube , sanitary napkin , savlon , silk suturing thread with round body with reverse cutting needle , sponge based antimicrobial barrier dressing for burn , sponge based antimicrobial barrier dressing for , suction cannula , surgical mask disposable with nose clip , uro bag , wide area fixation roll , antiseptic spray , diclofenac spray , dns , inj adrenaline , inj atropine , inj dextrose , inj diazepam , inj dopamine 5ml , inj drotaverin buscopan , inj eptoin phenytoin sodium , inj heamaccel , inj hydrocortisone sod , inj ketorolac , inj lorazepam , inj ns 500 ml , inj paracetamol 50mg , inj pd-lyte , inj phenargan 25mg , inj ringer lactate 500 ml , inj tramadol , inj xylocaine , lotion clotrimazole , sterile water , syp amoxycillin 200 clavunic acid 28.5 , syp mefanic acid pcm , syp ofloxacine ornidazole 60 ml , tab complamina , tab digene , tab drotaverine ds , tab lorazapam clonazepam , tab maftal spas dicyclomine mefanic acid , xylocain jelly lignocaine , electrode pads adult and paed for aed make-philips heart stroke , gauze than , endo tracheal tube adult and paed , tourniquate , accu check active strips code 333 , accu check instant strips code 10

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830502

11 Jul, 2025 6.14 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for staff quarters and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada. (package-2) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., library coffie table- supplying and placing center table in with an overall size 1200mm x 600mm x 450mm (h) that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywood with both side laminate finish. the four side of the table is provided 150 mm wide 18 mm thick play under the main work top plywood. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top frame and base frame and legs shall be supported on ms rectangle pipe frame having cross-section area 25mm x 25mm with 1.2mm thick with powder coated. there shall be ppcp shoe provided at the bottme to avoid scetching on the floor., side unit shall be provided with the bed at both side with an overall size 450mm x 450mm x 550mm. the side unit shall be made of 18mm thick waterproof plywood with both side laminate. it shall be supplied with one sliding drawer and one open drawer., dining table with six chairs, supplying & placing dining table with six chairs an overall size 1800mm x 900mm x 750mm. the top of the table shall be made up of 18mm thick teak wood. the top profile shall be in rectangular wooden shape with the edges shall be in chamfer shape. the under structure shall have teak wood having size 75mm x 75mm round shaped legs with melamine polish.there shall be shoe provided at the bottom to avoid scratches on the floor. dinning chair. the seat shall be made of 12mm thick waterproof plywood and season/teak wood frame upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m with leatherite tapestry 0.8mm thick and 535 gsm and the back shall be made of season/teak wood malemine polish finish frame. the frame structure shall be supportd by four legs made up of season/teak wood malemanie polish finish of size 50mm x 50mm. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 41010 mm(d) x 45010 mm(w) and back size shall be 44010 mm(w) x 56010 mm(h) from seat. overall height shall be 100010 mm., providing and supplying corner table with an overall size 600mm x 600mm x 410mm. the top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. the mdf top should have decorative finish with approved veneer and pu polish accordingly. the understructure shall consist of 4 nos. of ms sheet gold leg with 6mm thick., providing and installation of large tv unit, carcass panel shall be made of 18 mm prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. drawer bottom shall be made of 12 mm thick prelaminated waterproof plywood. 4 drawer front shall be made of 18 mm thick prelaminated waterproof plywood with edge banding 2 mm thickness on visible sides. all drawers shall be fitted with knobs.top shall be made up of

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

CTN :40679198

27 Jun, 2025 98.00 Lacs

Dausa - Rajasthan

Tender For corrigendum : arthroplasty implants for dh dausa - total hip replacement (thr) all sizesun cemented: -(metal on poly) all should be of same makeimplant should be usfda approved only, the femoral stem should have morphometric wedge geometry and ha coating/ porous coating. coating of minimum 50-micron thick, proximal body should be circumferentially plasma sprayed ( optional ) , incremental neck lengthoptions, two offset options minimum and made up of ti6al4v material., the acetabular shell should ha coated/ porous coating. the acetabular shell should feature two independent locking mechanisms for polyethylene liners and ceramic liners ( optional). the acetabular shell should have minimum 3 hole options.. the acetabular shell sizes should come in sizes from 44 to 62 mm with required cancellous bone screws., insert should be highly cross linked polyethylene. the polyethylene has 10-degree or more posterior superior lip. the polyethylene is compatible to accommodate 28mm, 32mm, and 36mm heads., femoral heads should be cocr metal head with all sizes 28mm/32mm/36mm, cancellous bone screws of 6.5 mm in length and 20 to 60 mm in diameter., total hip replacement (thr) all sizesun cemented: -(ceramic on poly)all should be of same makeimplant should be usfda approved only, the femoral stem should have morphometric wedge geometry and ha coating/ porous coating. coating of minimum 50-micron thick, proximal body should be circumferentially plasma sprayed ( optional ) , incremental neck length options, two offset options minimum and made up of ti6al4v material., the acetabular shell should ha coated/ porous coating. the acetabular shell should feature two independent locking mechanisms for polyethylene liners and ceramic liners ( optional). the acetabular shell should have minimum 3 hole options.. the acetabular shell sizes should come in sizes from 44 to 62 mm with required cancellous bone screws., insert should be highly cross linked polyethylene. the polyethylene has 10-degree or more posterior superior lip. the polyethylene is compatible to accommodate 28mm, 32mm, and 36mm heads., femoral heads should be ceramic with all sizes 28mm/32mm/36mm., cancellous bone screws of 6.5 mm in length and 20 to 60 mm in diameter., total hip replacement (thr) all sizescemented: - with metal on poly. note: - all should be of same make except cementimplant should be usfda approved only, cemented femoral stem should highly polished, double tapered with collarless design., the cemented cup should have ultra-high molecular weight polyethylene with pmma cement spacer easily identifiable the cup position on an x-ray. cup should be available in the i.d 28 /32 / 36 mm with od 46 60 mm with two packets of bone cement., femoral heads should be cocr metal head with all sizes 28mm/32mm/36mm, total hip replacement (thr) all sizeshybrid ( metal on poly ) note: - all should be of same make except cementimplant should be usfda approved onlynote:- all should be of same make except cement, the acetabular shell should ha coated/ porous coating. the acetabular shell should feature two independent locking mechanisms for polyethylene liners and ceramic liners ( optional). the acetabular shell should have minimum 3 hole options.. the acetabular shell sizes should come in sizes from 44 to 62 mm with required cancellous bone screws., insert should be highly cross linked polyethylene. the polyethylene has 10-degree or more posterior superior lip. the polyethylene is compatible to accommodate 28mm, 32mm, and 36mm heads., cemented femoral stem should highly polished, double tapered with collarless design with required bone cement., femoral heads should be cocr metal with all sizes 28mm/32mm/36mm, cancellous bone screws of 6.5 mm in length and 20 to 60 mm in diameter., total hip replacement (thr) all sizes -hybrid: (ceramic on poly) note: - all should be of same make except cementimplant should be usfda approved only, the acetabular shell should ha coated/ porous coating. the acetabu

By Cities

By States

By Agencies

By Ownerships

By Sectors