Tender For custom bid for services - habitability package for jur sagar kiran; 1 5.1 wooden panel flooring, 2 5.1.1, 1)supply &replacement of wooden panel flooring for jr. & sr., recreation room, executive room, auditorium, t/p room, radio room,, control room, engg. office & t/p office.specification: wooden plank (2 m, x 305 mm x 75 mm thk), type of wood: balau timber, sq.ft. 2600, 3 5.2 flooring, 4, 5.2.1, 1)supply &replacement of vinyl flooring for a,b,c,o decks,including, messes and staircase with teak wood running skirting 150mm width,6mm, thick on all room walls,stair cases,offices,control rooms and scr room., specification:thickness of 2mm or more,fire resistant,non slippery,, washable,wooden finish., 2)quantity is indicative and will be finally calculated based on the, damages assessed at the time of dry dock., 3)as a turnkey job, bidder to carryout all associated job including renewal, of damaged deck composotion., make:armstrong/hanwa/flora or as approved by ongc., sq.ft. 15000, 5, 4) material to be approved by ongc., 5) primary deck covering should be of approved material which will not, give rise to toxic or explosive hazards elevated temperatures*. (refer to, imo res. a.687(17) - fire test procedures for ignitability of primary deck, coverings), 6 5.3 lining panels 'c' class, 7 5.3.1, 1) supply & replacement of abs approved (solas) lining panels (12, mm thick) for a, b, c, 0, decks, including canteen and staircase, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc., 4). material to get approval from ongc., sq.ft. 15000, 8 5.3.1, glass wool insulation should be of 4 inches thickness (high density, block), fire resistant and suitable for accommodation ceilings of drilling, rigs., sq.ft. 15000, 9 6.75 remove & refit of sensors & bell router of fire alarm system from ceiling, panels of a,b,c,o decks of accomodation area nos 220, 10 6.61 remove & refit of paga system from ceiling panel of of a,b,c,o decks of, accomodation area nos 140, 11 5.4 partition / lining panels 'b' class, 12 5.4.1, 1) supply & replacement of abs approved partition / lining panels (22, mm.) at various locations of accommodation, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system. ., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc. 4). material to get approval from ongc., sq.ft. 15000, 13 5.4.1 glass wool insulation should be of 4 inches thickness high density block,, fire resistant and suitable for offshore drilling rigs. sq.ft. 15000, 14 5.5 shoe racks, 15 5.5.1, 1) supply of ready made shoe racks to be made in both 'a', and 'b', decks at exit points on port & starboard sides as per following:, a) shoe rack for 'b' deck: size 4' x 1-1/2' x 1-1/2', b) shoe rack for ''a' deck: size 6' x 1-1/2' x 1-1/2'., 2) makes: 1.guatier, 2. durian, 3. concepts, mumbai, 4. godrej or as, approved by ongc., set 2, 16 5.6 new flooring at freezer room & cooler room, 17, 5.6.1, 1) to provide new flooring for freezer room and cooler room with, thermal insulation to avoid heat loss including supply of materials as per, details given below:, a) room volume - 22.4 m3,, b) ceiling area - 12.4 m2, temp. -20c,, c) floor area - 12.4 m2,, d) sidewalls - 13 m2 x 12.8 m2 x10.7 m2x12.5 m2., e) rubber mats - 12 mm thick synthetic rubber, 2) supply and fixing of anti-skid floor tiles in both the rooms., (makes nitco, johnson, spartek, sonora, kajaria), 3) supply and fixing of thermal insulation including materials for all side, walls and ceilings of both the rooms as per drg. no. 770/
Tender For supply of hand gloves,drill sword,white tape roll,chair neelkamal,camera battery charger sony,white file cover printed,cp plus camera,hussan cloth,paint white,paint black,paint red,bn order book register,coy order book register,odomoss,lamy cartridge
Tender For supply of procurement for property items d d - vertical zebra blind , mat pvc , polishing of brass items , glass appointment board , table office , corner stand , back table , zafri , side table , cap stand , emergency light , tray 18 inch white , fpo counter , cemented flower pot dia 18 inch , cemented flower pot dia 6 inch , table glass , grass cutting machine , washing machine semi automatic , heavy duty cloth drying machine , vegetable chopper heavy duty , steel rack for veg , battery charger , groz bucket oil pump with wheel , hydraulic jack , car creeper trolley , led tv 43 inch , led tv 32 inch , compactor file storage system , student sewing stool with seat , stabilizer , glass set , wooden frames , mixer grinder , induction stove , pulse oximeter , digital thermometer , medical pen torch , cold and hot gel pack , glucometer , blood pressure monitor , bmi scale , fly catcher , car flag , inverter with double battery , mobile rack , chairs non revolving , formation sign , lancer with flag
Tender For supply of rain coat with ncc logo , mosquito net khaki/white , ncc shoulder badge , mufti dress , tie and tie pin , track suit for sd and sw , air ncc uniform , beret green , cap badge and hackle , scarf , kamar band and jhalar , name tab , sports shoes , white gloves , socks white , socks black , back pack , blazer , leather belt with buckle , cap blue with embroidery , red sashes , t shirt , drill boot , identity card with holder , towel hand , brass eagle with cloth , chest cloth with number plate , rank under officer , rank cadet warrant officer , rank cadet sergeant , coffee mug , shoes brush , shoes polish , shoes shiner , black pen with ncc logo , blue pen with ncc logo , exam pad with ncc logo
Tender For tender for supply of apron blue drill cloth , hand gloves canvas 18 inch , hand gloves chrome leather 12 inch , hand gloves chrome leather 24 inch , hand gloves nitrile com rub 9-10 inch , hand gloves rubber 12 inch , hand gloves rubber 18 inch , hand gloves rubber electrician 15 inch , protective spectacle polycarbonate , particulate respirator r95 , surgical mask
Tender For corrigendum : purchase of biochemistry lab equipments - fully automatic biochemistry analyzerthroughput: 200 photometric tests/hour & 400 tests/hour with ise (optional)reagent positions: 50 cooled reagent positionssample type: whole blood, serum, plasma, urine, csf otherreading volume: 180 lsample volume: 2-70 l (adjustable in 0.1 l)reagent volume: 10-300 l (adjustable in 1 l)light source: halogen lampon board laundry: 6 stage cleaning, 2 stage drying with cuvette validation stepcalibration type: linear, non-linear, multipointprogrammable parameters: default system pack parameters + upto 10 user defined parametersdimensions and weight: ergonomic design and light weight., fully automatic hematology analyzerthroughput-up to 80 samples per hourdimensions and weight ergonomic design and light weighttest mode-cbc, cbc+diffdata storage capacity-up to 100 000 resultscommunication-lan port supports hl7 protocolpower requirement-a.c. 100-240 v, less than or equal to 300 va, 50/60 hzoperating temperature-15 to 30 degree celsiusoperating humidity-30-85%air pressure70-106 kpa, fully automatic immunoassay analyser random assay (hormone analyser)instrument name: immunoassay analyserusage/application-clinicalplate format-random assaydetection method-luminescenceparameters-blood alcohol contentautomation-fully automaticuser input-touchassays-diabetes, thyroid, cardiac, vit d, fully automatic electrolyte analyser-analysis time: 60 second per sample parameters- na , k , cl or ca2+no. of parameters 3 simultaneously90 luser inputs 5 colored touch screen displayelectrode type- sturdy electrode (facility to refill the solution)connectivity 2 usb port, rs232, lisdata storage- 10,000 patient results & 10,000 qc results for 3 levelssample identification- alphanumeric sample idqc management- tri-level quality control, l j plots of last 30 dayscalibration- 2 point calibration on every 4 hours1 point with every samplepower - 100 240 v, 50/60 hz (self adjusting)printer - inbuilt thermal printerroom temperature -15 30 c / 60 90 fhumidity- 85%dimensions and weight - ergonomic design and light weight, centrifuge machine along with 500 prp test tubes (double spin)parameter- neya-16 max speed (rpm)- 15000max rcf (g)- 21000max capacity (ml)- 4 x 175acceleration profiles- 10deceleration profiles- 10display-- multi-color lcdno of programmes- 10 (protected)timer- 30 sec to 99 min & continuous modeergonomic design and light weightsupply - 220v, 50 hz, 1 phasecan be used for extracting prp, autoclavekey features- high-pressure vessel: a high-pressure vessel designed to withstand high temperatures and pressures- temperature control: precise temperature control to ensure effective sterilization- timer and controls: easy-to-use timer and controls for convenient operation- safety features: multiple safety features, such as automatic shut-off and overheat protection, to prevent accidents and ensure safe operationconstruction and materials- stainless steel: a durable stainless steel construction to withstand high temperatures and pressures- insulation: high-quality insulation to ensure efficient heat retention and energy savings- door and seals: a secure door and seal system to prevent steam escape and ensure effective sterilizationperformance specifications- temperature range: 121 c to 134 c.- pressure range: upto 30 psi- cycle time: 15-60 minutes- sterilization capacity in liters or cubic feetsafety standards- compliance with regulations: compliance with relevant regulations, such as asme, fda, and iso standards- automatic safety devices: automatic safety devices, such as overheat protection and low-water cut off, to prevent accidents and ensure safe operation- interlocks: interlocks to prevent door opening during operation and ensure user safetyadditional features- data logging: optional data logging capabilities to track temperature, pressure, and cycle data- printed records: optional printed records of cycle data for documentation and quality control- val
Tender For supply of pillow covers, handloom cotton white bleached size 575 +10/-0 x 425 +10/-0 mm to variety no.12 of is: 745-2021 (for ac 2-tier & ac 3-tier), sizes and running strips as per scr/c&w-sketch no.1216/m, alt-3. note: - 1. colour fastness test: bleaching test shall be carried out as per sl. no. v) d of table-2 of is: 745-2021. 2. and all parameters conforming to is: 745-2021. 3. firms are requested to study carefully the attached drawing for the pillow cover before bidding. it may please be noted that the "stitching should be machine stitching in straight double line." no deviation is permitted against this clause. [ warranty period: 12 months after the date of delivery ]