Vibrating Machine Tenders

Central Government/Public Sector

CTN :42073688

05 Jan, 2026 NA

Salem - Tamil Nadu

Tender For bid to ras supply of continuous vibration monitoring system in hot rolling mill of sail ssp

CTN :43400787

12 Jan, 2026 19.7 Thousand

Kutch - Gujarat

Tender For supply of switch inductive proximity unsealed 28v , switch sanp acting sealed single pole , toggle switch pole sealed x20 30 1 , toggle switch 2 pole x20 302 2 , oil filter , anti vibration pad cooling system eng , anti vibration pad cooling system engin , hose 8x 1 mm oil filter , fuel filter power unit , sealing ring

State Government

CTN :43393403

10 Jan, 2026 20.00 Lacs

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of online vibration monitoring system along with allied accessories including diagnostic software for unit-ist of 105 mw (3x35) ushp-ii, kangan hep

Corporations And Associations And Others

CTN :43342873

02 Jan, 2026 2.98 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at sarita vihar in ward no. 187, central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration ,on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle : should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification : must have valid en certificaton, petrol operated chain sawengine : single cylinder, 2 stroke, aircooled onlydisplacement: 45.4ccpower output : 2.3kw. 3.0 hp max.engine speed (with guide bar & chain ): at least 12500 rpmcarburetor: diaphragm type & compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight( without cutting attachment ): should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch. guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only.chain lubrication system: fully automatic ,speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock,throttle, acceleration,switch off.guaranteed sound power level: should not be more than115 db(a)maximum chain velocity to iso 11681: should be minimum 28 m/scertification: product should have valid dplf certificate with test standard en iso 11681., tree prunersupply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max, lawn mowersupply of lawn mower:-specification:- type of machine walk behind lawn mowerspower source petrol enginestart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 500 to 524minimum cut height 1 millimetermaximum cut height 26 millimeterblades metallicnumber of blades 1number of positions for cut - height adjustment 2number of levers for cut - height adjustment single levernumber of wheels 4front wheel size 200 millimeterrear wheel size 200 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 88 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity - 1 ltr., lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Central Government/Public Sector

CTN :43365433

20 Jan, 2026 20.00 Lacs

Barmer - Rajasthan

Tender For material and labour for conducting rrs exercise in tech area at af stn utarlai - m&l for broken stone boulders of granite/ trap or basalt stone of size exc exc 100mm but not exc 450 mm including surface dressing of stacking ground & stacked properly all as specified., supply only granuler sub base delivered to any location in technical area & stacked properly including surface dressing all as specified and as directed., supply only wet mix macadam delivered to any location in technical area as per design mix approved by ge and conforming to is - 2286 all as specified.(rolling and spreading to required amber will be paid seperately.), m&lfor cationic bitumen emulsion ssi grade conforming to is 8887 delivered to any location in technical area complete all as specified and directed. (charges for bitumen emulsion machine stand ideal and working at site will be paid separately ), m&l for lime unslaked, fat or magnesium powder at rrs exercise location in packed hdpe bags all as specified and approved. (charges for labour stand ideal and working at site will be paid separately ), m&l for bituminous premix dense asphaltic concrete- i (dac-i) using paving bitumen grade vg 30 @ 6% by weight of total mix delivered to any location in technical area as per approved design mix by ge all as specified and directed.(charges for labour , paver roller and other required machinary for stand ideal and working at site will be paid separately ), supply only test report only job design mix formula for dense asphalt concrete - i as per specification of para 20.b.4 of mes ssr part-i of 150 mm thick (50 mm thick each layer) obtained from approved lab including supply of material required for job mix formula to lab and payment of testing charges to approved lab complete all as specified and directed, supply test report only job design mix formula for wet mix macadam as per specification of para 20.b.5 of mes ssr part-i of 200 mm thick obtained from approved lab including supply of material required for job design mix formula to laboratory and payment of testing charges to approved laboratory complete all as specified and directed, hiring of mechanical asphalt paver finisher of capacity 150 to 200 tons/hour for laying of dense asphalt concrete and wet mix macadam all as directed. (note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring of mechanical asphalt paver finisher of capacity 150 to 200 tons/hour for laying of dense asphalt concrete and wet mix macadam all as directed. (note: rate to be quoted by contractor for plant when stand idle in standby condition in tech area/rrs exercise site ), hiring of vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of stone boulder, gsb and wet mix macadam all as directed.(note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring of vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of stone boulder, gsb and wet mix macadam all as directed.(note: rate to be quoted by contractor for plant when stand idle in standby condition in tech area/rrs exercise site ), hiring of double drum smooth vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of bitumenious layer of dense asphalt concrete (dac-i)only all as directed.(note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring of double drum smooth vibromax power roller of capacity 8 to 12 tonne capacity for rolling/compaction of bitumenious layer of dense asphalt concrete (dac-i)only all as directed(note: rate to be quoted by contractor for plant when stand idle in standby condition in tech area/rrs exercise site ), hiring of generator 5 kva (trailor mounted) with all electric connection accessories to electric output units installed to any location in technical area all as directed.(note : rate to be quoted by contractor for vehicle/plant when working at site) ., hiring o

CTN :43369169

19 Jan, 2026 NA

Hyderabad - Telangana

Tender For supply of honeycomb tabletop (magnetic) size: 3000mm x 1500mm, thickness: 200mm along with passive vibration , honeycomb tabletop (magnetic) size: 1000mm x 1000mm, thickness: 150mm along with passive vibration , kinematic mount for large circular optics, dia 100mm , kinematic mount for circular optics, dia 25mm , kinematic mount for circular optics, dia 50mm , kinematic mount for large circular optics, dia 75mm , v type adjustable lens mount, dia 100mm , v type adjustable lens mount, dia 50mm , beamdump model no: bd-100 , beamdump model no: bd- 150 , 12mm dia post: length 50mm with stainless steel post holder with m6 tapped holes , 12mm dia post: length 100mm with stainless steel post holder with m6 tapped holes , 12mm dia post: length 150mm with stainless steel post holder with m6 tapped holes , switchable magnetic post bases , xy post base , radical slotted baseplate , table clamps , manual lab jack , dual rod system , 5 axis kinematic optical flat holder with jaw holder , optical rail: length 500 mm , optical rail: length 1000 mm , carrier for optical rail , optical rail: length 2000mm , five axis positioner

CTN :43371445

14 Jan, 2026 33.62 Lacs

Vizianagaram - Andhra Pradesh

Tender For supply of material procurement for construction of cc road -stone dust , cement , sand , 20mm metal , 12mm metal , selected earth , plasticizers , bitumen primer , bitumen sealent , polythene sheet , water , concrete mixer , plate vibrator , needle vibrator , water tanker 6kl , concrete groove cutting machine , providing form work

Central Government/Public Sector

CTN :43029124

02 Jan, 2026 NA

Noida - Uttar Pradesh

Tender For corrigendum : supply of fqa lab mechanical for lara and talcher project d d -- magnetic particle inspection yoke type-02 nos, pie gauge for mpi-02 nos, radiography film densitometer-02 nos, uv lamp for fluorescent mpi and dpt-02 nos along with all accessories , group-5 - stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-02 days in talcher and 02 days in lara , group-5 - site visit - - should include travel expenses to-fro site, visa- insurance-if applicable, intermediary stay- for sup of e and c etc at site-01 visit in talcher and 01 visit in lara , group-6 - radiation survey meter-02 nos, personal digital dosimeter-04 nos, ultrasonic testing machine-conventional with probes and calibration blocks-02 nos with all accessories , group-6- stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-02 days in talcher and 02 days in lara , group-6 - site visit - should include travel expenses to-fro site, visa- insurance-if applicable, intermediary stay- for sup of e and c etc at site02 visit in talcher and 02 visit in lara , group-7- digital radiography-02 nos along with all accessories , group-7stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-04 days in talcher and 04 days in lara , group-7 - site visit - - should include travel expenses to-fro site, visainsurance-if applicable, intermediary stay- for sup of e and c etc at site-02 visit in talcher and 02 visit in lara , group8- optical microscope for replica interpretation,optical microscope and image analysis system, stereo microscope with camera attachment-02 nos , group-8- stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-01 days in talcher and 01 days in lara , group-8- site visit should include travel expenses to-fro site, visa- insurance-if applicable, intermediary stay- for sup of e and c etc at site02 visit in talcher and 02 visit in lara , group-9- computed radiography-cr-scanner-02 nos-alongwith all accessories please refer price schedule , group-9- stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-04 days in talcher and 04 days in lara , group-9- site visit - - should include travel expenses to-fro site, visa- insurance-if applicable, intermediary stay- for sup of e and c etc at site-02 visit in talcher and 02 visit in lara , group-10- hardness tester rebound type-02 nos and hardness tester_uci method-02 nos-along with all accessories , group-10- stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-02 days in talcher and 02 days in lara , group-10- site visit - should include travel expenses to-fro site, visa- insurance-if applicable, intermediary stay- for sup of e and c etc at site01 visit in talcher and 01 visit in lara , group-11radiography film viewer-04 nos, radiography film samplesasme-02 nos , magnetic particles inspection-coil type with cable-02 nos, gaussmeter for mpi-02 nos, ni-cr panel for dpt-02 nos , group-11- stay at site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-02 days in talcher and 02 days in lara , group-11- site visit - - should include travel expenses to-fro site, visa- insurance-if applicable, intermediary stay- for sup of e and c etc at site-01 visit in talcher and 01 visit in lara , group-12-pls refer item description and price schedule for details_holiday detector, stethoscope, vibration meter, comparator, roughness meter, noise meter, torque wrench etc , group-12- stay at //bid details2 / 46site including lodging, boarding, local conveyence etc for supervision of erection and commissioning etc at site-10 days in talcher and 10 days in lara , group-12- site visit - should

Central Government / Public Sector

CTN :43226027

05 Jan, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of m/s m/s bently nevada llc make vibration monitoring system for compliance of rtf recomendation and spf recomedation spares at iocl paradip refinery.(r06)

Central Government/Public Sector

CTN :43358820

09 Jan, 2026 NA

Jaipur - Rajasthan

Tender For supply of energy harvesting development kit (item name) energy harvesting power management evaluation boardenergy harvesting power management evaluation board, mini solar panel, thermoelectric generator (teg) module, piezo / vibration energy harvester, supercapacitor, low-power microcontroller board, voltage / current monitoring module, resistive load / dummy load module, prototyping / breakout board, connecting cables & headers, enclosure / mounting hardware

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector