Description :
Tenders for Providing And Fixing Of Open Air Gym Equipments In Various Parks Of Sector 20,chandigaarh Under Ward Development Fund. - Providing And Fixing Of Chest Press Double Size / Dimensions Length -1200 Milimeterwidth- 700 Milimeterheight 1800 Milimetermaximum Weight -120 Kilogrammaterial:- All The Pipes Shall Be Galvanized Iron (gi) And Isi Marked To Ensure Strength, Durability, And Corrosion Resistance. The Main Central Pipe Shall Be An 80 Mm Nb Gi Pipe, While The Handle Frame And Sheet Frame Shall Each Consist Of 40 Mm Nb Gi Pipes. The Connecting Links Shall Be Made Of 32 Mm Nb Gi Pipes, And The Footrest Pipe Shall Also Be 32 Mm Nb Gi. The Mild Steel (ms) Foundation Plate Shall Have A Minimum Thickness Of 12 Mm. The Foundation Pipe Shall Consist Of A Gi Pipe Anchored 750 Mm Deep And Supported With An Ms Angle Of 25 25 4 Mm For Stability. The Seat And Backrest Shall Be Made Of High-density Polyethylene (hdpe) Sheets With A Thickness Of 3 Mm, Designed With A Uniform Bending Radius To Avoid Sharp Edges And Ensure User Safety. All Nuts And Bolts Used For Assembly Shall Be Made Of Galvanized Iron (gi) To Enhance Durability And Resistance To Corrosion. The Movement Mechanism Shall Be Fitted With Ball Bearings That Are Self-lubricating And Sealed To Protect Against Rain, Dust, And Other Environmental Elements. The Closing Caps Of Open Ends Of All Pipes, As Well As Bearings, Bushes, And Bases, Shall Be Covered With Fibre-reinforced Plastic (frp) Closing Caps Having A Minimum Thickness Of 3 Mm. All Plastic Components Shall Be Uv-stabilised And Weather-resistant To Ensure Long-lasting Performance In Outdoor Conditions.colour:- Green Paint Finish- Power Coated, Uv Resistantpaint Coating Thickness (min) 100 Micrometerwarranty 3 Years.complete In All Respects, Including Installation Of Equipment In A Cement Concrete Block Of Size 5 X 5 X 1 , To The Entire Satisfaction Of The Engineer-in-charge., Providing And Fixing Of Leg Press Leg Shaper Complete In All Respects Having Following Specifications.a) All Pipes Should Used In The Equipments Should Be Galvanised With 3mm Thickness.b) Multi Colour Powder Coating With Polyster Paints Should Be Used On All The Equipments.c) The Foot Pedal On All The Equipments Should Be Of Aluminium Only.d) The Seats Should Be Made Of High Quality Plastic With Colour Scheme In Yellow Or Orange.e) The High End Bearings Such As Skf/nbc Must Be Used In All The Equipments.1 Dimensions- 1730*450*1450mm2 Colour- Customizable Multi Colour And Complete Powder Coat3 Size Of Main Tube-114*3.75mm Steel Pipe4 Size Of Supporting Tube-76*3mm Steel Pipe5 There Is Restrainer Inside, The Distance Between Swing Arm And Main Tube Is Greater Than 230mm Avoiding The Danger Of Getting Stuck.6 Al Alloy Protecting Covers Are Used At The Top Other Main Tubes To Protect From The Rainwater7 Anti-skid Components Are Used At The Pedal Parts.8 The Distance Between Two Spinners Is No Less Than 230mm, Avoiding The Damage Of Being Stuck9 Anti Theft Cover Is Made By Stainless Steel/high Quality Plastic.10 Thickness Of Bearing Bracket Is No Less Than8mm11 Hazardous Materials Like Coating Agent, Rubber Are Under National Newest Standard.functions: Develops The Strength Of Lower Limbs, And Improves The Stability And Agility Of Three Main Joints Of Lower Limbs; Good For The Healing Of Inconvenience Of Bending And Stretching Of Lower Limbs, And Muscular Atrophy Of Lower Limbs, Rheumatoid Arthritis, Sciatica, Sprain Of The Anklebone, Etc. Approaches: Sit On The Chair And Step On The Footboard. Stretching Legs With Force And Recover Slowly. Repeat. Users: Suitable For People Of Different Ages.complete In All Respects, Including Installation Of Equipment In A Cement Concrete Block Of Size 5 X 5 X 1 , To The Entire Satisfaction Of The Engineer-in-charge., Providing And Fixing Of Parallel Bars Size/dimensionslength- 900 Millimeterheight 800 Millimetermaterial:- All The Pipes Shall Be Galvanized Iron (gi) And Isi Marked To Ensure Strength And Durability. The Ver
