Description :
Tenders for Procurement Of Consumables For Oh Of U6, 2026 Under Ahp-mm And Tm Dept, Ktps. - Pu Tube Connector 1/2 1/2" To 10 Mm Npt(m) Pu Tube Connector ( Push Male Pu Tube Connector Thread Size: 1/2inch Pipe Size: 10mm, Moc: Metal Body (chromed) With Pbt Cap Fluid: Air Operation: Push-in Make-aeroflex/spac Pneumatic ), Pu Tube Connector 1/4" To 10 Mm Npt(m) 1/4" To 10 Mm Npt(m) Pu Tube Connector ( Push Male Pu Tube Connector Thread Size: 1/4 Inch Pipe Size: 10mm, Moc: Metal Body (chromed) With Pbt Cap Fluid: Air Operation: Push-in Make-aeroflex/spac Pneumatic ), Pu Tube Connector Size 10 Mm Diax3/8in Bsp(m) ( Push Male Pu Tube Connector Thread Size: 3/8 Inch Pipe Size: 10mm, Moc: Metal Body (chromed) With Pbt Cap Fluid: Air Operation: Push-in Make-aeroflex/spac Pneumatic ), Pu Tube,od-10mm, Id-6.5mm Pu Tube Od-10mm,id-6.5mm,wall Thickness1.75 Mm,temp Range-40f To+160f,hardness Shorea98,brust Pressure(psi)-450, Vacuum Rating-to 28"hg,working Pr.(psi)-150 @70f ( Make:-aeroflex/spac Pneumatic ), Anabond 666 Size 310 Gm # ( Thixotropic Silicone Sealant In Hdpe Cartridge (310g) Make:-anabond Ltd ), Bend Pipe, 90 Deg, 40nbx40nb,ms Seamless For Wet Ash System Moc-ms Thk-3.7mm As Per Sch 40 Steel Pipe ( Schedule 40 No Negative Tolerance In Thickness Is Allowed ), Bend,ms,200x200x90 Deg Ash Water Line ( Seamless, Schedule 40 Thk-9.52mm No Negative Tolerance In Thickness Is Allowed ), Bend,ms,150x150x90 Deg Ash Water Line ( Seamless,schedule 40 Thk-9.52mm No Negative Tolerance In Thickness Is Allowed ), Bend Pipe,90 Deg, 50nbx50nb,ms Seamless For Wet Ash System Moc:-ms Thk-4mm As Per Sch 40 Steel Pipe, Bend,ms,80x80x90 Deg Ash Water Line ( Seamless, Sch-40 Thk-7.0mm No Negative Tolerance In Thickness Is Allowed ), Bend,ms,100x100x90 Deg Ash Water Line ( Seamless,sch-40 Thk-7.5mm No Negative Tolerance In Thickness Is Allowed ), U-clamp,m16 For 8 In Ci Pip For Ahp Bktpp Moc: Ms; Size: 232mm Dia,308mm Length,75m ( With 02 Nos Of Nuts & 02 Nos Of Washers For Each U-clamp ), Turn Buckle,gi ( With Ms Mounting Bracket Type-eye To Eye Eye Hole Should Be For M20 Bolt Total Length-1350mm Thk-20mm Square Section-50x250mm ), Gasket,200nb Coupling,neoprene Rubber For Ash Conveying Line ( Temp Withstand Capacity-140 Deg Celcius ), Flat Gasket,8 Inch,nitrile Rubber # For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, Id,9 Inch,od,11 Inch,th.,1/4 Inch ( Temp Withstand Capacity-140 Deg Celcius ), Flat Gasket,6 Inch,nitrile Rubber # For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, Id,7 In,od,8-3/4 Inch,th.,1/ 4 Inch ( Temp Withstand Capacity-140 Deg Celcius ), Flat Gasket,10 Inch,nitrile Rubber # For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, Id,11 In,od,13 In,th.,1/4 In ( Temp Withstand Capacity-140 Deg Celcius ), Flat Gasket,9 Inch,nitrile Rubber # For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, For Dry Ash Line Sleeve Coupling, Id,10 In,od,12 In,th.,1/4 In ( Temp Withstand Capacity-140 Deg Celcius ), Gasket,graphite Coated Asbestos,10 Inch # # For Sleeve Coupling In Vacuum Line ( Temp Withstand Capacity-140 Deg Celcius ), Gasket,9 Inch,graphite Coated Asbestos # # For Sleeve Coupling In Vacuum Line,stg.-2 ( Temp Withstand Capacity-140 Deg Celcius ), Gasket,6 Inch,graphite Coated Asbestos # # For Sleeve Coupling In Vacuum Line,stg.-2 ( Temp Withstand Capacity-140 Deg Celcius ), Gasket For Esp Hopper Gate Mouth Hand Hole Od-170mm,id-120mm,thk-5mm For Fly Ash System,unit-4,5,6 ( Moc-neoprene Rubber Temp Withstand Capacity-140 Deg Celcius ), Gasket For Esp Hopper Chute Face Od-400mm,id-315mm,thk-3mm For Fly Ash System,unit-4,5,6 ( Moc-neoprene Rubber Temp Withstand Capacity-140 Deg Celcius ), Gasket For Esp Hopper Hand Hole For Actuator Sa25e125 Od-118mm,id-90mm,thk-9mm For Fly Ash System,unit-4,5,6 ( Moc-neoprene Rubber Temp Withstand Capacity-140 Deg Celcius ), Gasket For Esp Hopper V
