Description :
Tenders for Purchase Of Fencing Material - Rcc Fencing Poles Type - Straight Length - 2.45 Meter Dimensions - Bottom 15x15 Cm Square, Top 10x10 Cm Square. Cement Concrete Mix -cement, Sand And Metal Ratio 1:2:4 With 12.5 Nominal Size Coarse Aggregate. Sand Used Should Be Free From Clay And Salt. Concrete Mix Shall Be Conforming To Grade M-15.reinforcement - 4 Round Vertical Bars Of 6 Mm Diameter. 13 Nos. Of Stirrups Of 6 Mm Diameter Round Ms Bars 25 Mm Center To Center.hooks - 7 No.,top Hook Should Be Provided 100 Mm Below The Top Of Poles, And Bottom Hook Should Be Provided 500 Mm Above The Bottom Of Poles. The Central Distance Between The Top And Bottom Hooks Shall Be Equally Divided To Fix Remaining Hooks. Manufacturing - In Order To Ensure Desired Compressive Strength, Rcc Fencing Poles Should Be Compacted With The Help Of Platform Vibrators, Surface Should Be Uniform And Free From Voids. The Concrete Cover Over The Reinforcement Should Not Be Less Than 1.5 Cm, Rcc Fencing Poles Type - Straight Length - 2.00 Meter Dimensions - Bottem 10x10 Cm Square, Top 8x8 Cm Square. Cement Concrete Mix -cement, Sand And Metal Ratio 1:2:4 With 12.5 Nominal Size Coarse Aggregate. Sand Used Should Be Free From Clay And Salt. Concrete Mix Shall Be Conforming To Grade M-15. Reinforcement - 4 Round Vertical Bars Of 6 Mm Diameter. 11 No. Of Stirrups Of 6 Mm Diameter Round Ms Bars 20 Cm Center To Center. Hooks - 5 No., Bottom Hook Should Be Provided 60 Cm Above The Bottom Of The Poles, Second At 82.5 Cm, Third Hook 112.5 Cm. Fourth Hook At 150cm, Top And Fifth Hook At 195 Cm From Bottom. Manufacturing - In Order To Ensure Desired Compressive Strength, Rcc Fencing Poles Should Be Compacted With The Help Of Platform Vibrators, Surface Should Be Uniform And Free From Voids. The Concrete Cover Over The Reinforcement Should Not Be Less Than 1.5 Cm., Prcc Fencing Poles Type Straight Length - 2 Meter - Each Fencing Pole Shall Be Of Square Cross-section Measuring 100 Mm × 100 Mm. The Pole Shall Contain 4 Nos. Vertical Reinforcements Made Of 4 Mm Diameter High Tensile Steel Wire. Each 2.0 Meter Fencing Pole Shall Be Provided With 6 Nos. Holes. The Top Hole Shall Be Provided At 100 Mm Below The Top Of The Pole. The Bottom Hole Shall Be Provided At 500 Mm Above The Bottom Of The Pole. The Centre-to-centre Distance Between The Top And Bottom Holes Shall Be Equally Divided For The Remaining Holes. ‘j’ Hooks Shall Be Made Of 6 Mm Diameter Ms Bars With Proper Threading At One End, Along With Nut And Washer For Tightening Purpose. The ‘j’ Bolts/hooks Shall Pass Through The Holes Provided In The Fencing Poles
